Page 2 - Table of contents
Table of contents Before Using the Product Copyright 5 Safety Precautions 6 Symbols 6Cleaning 6 Storage 7 Electricity and Safety 7 Installation 8Operation 10 Preparations Checking the Components 13 Components 13 Parts 15 Reverse Side 15 Anti-theft Lock 16 Remote Control 17 Before Installing the Prod...
Page 3 - Sound Adjustment
Table of contents Black Tone 51Flesh Tone 51RGB Only Mode 51Colour Space 52White Balance 52Gamma 52Motion Lighting 52 Picture Options 53 Colour Tone 54Colour Temp. 54Digital Clean View 54MPEG Noise Filter 54HDMI Black Level 54Film Mode 55Auto Motion Plus (for ED55D models only) 55 Dynamic Backlight ...
Page 4 - Support; Troubleshooting Guide; Appendix
Table of contents Reset All 83 Support Software Update 84 By USB 84 Contact Samsung 84 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre 85 Testing the Product 85 Checking the Resolution and Frequency 85 Check the followings. 86 Q & A 93 Specifications General ...
Page 5 - Before Using the Product; Copyright
5 Before Using the Product Chapter 01 Copyright The contents of this manual are subject to change without notice to improve quality. © 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of...
Page 6 - Safety Precautions; Caution; Symbols; Warning; Cleaning
6 Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPENCaution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)THERE ARE NO USER SERVICEABLE PARTS INSIDE.REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.It is dangerou...
Page 8 - Installation
8 Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result. ! Keep the power s...
Page 10 - Operation
10 Operation Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. • A fire or electric shock may result. • Contact Samsung Customer Service Centre for repairs. ! Before moving the product, turn off the power switch and disconnect the power cab...
Page 13 - Preparations; Checking the Components; Components
13 Preparations Chapter 02 Checking the Components - Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may differ from the image shown. - A stand is not provided with the product. To install a stand, you can...
Page 14 - Items sold separately
14 Items sold separately Wall-mount Kit HDMI cable ( P.36 ) HDMI-DVI cable ( P.35 ) Component cable ( P.37 ) DVI cable ( P.35 ) RS232C-Stereo cable RS232C(OUT ) adapter
Page 15 - Parts; Reverse Side; Port
15 Parts Reverse Side ED32D ED40D ED46D ED55D Remote Sensor POWER Port Description HDMI IN Connects to a source device using an HDMI cable. SERVICE (5V 0.5A) This port is used to upgrade the software. RGB IN Connects to a source device using a D-SUB cable. DVI IN Connects to a source device using a ...
Page 17 - Remote Control; OFF; VOL
17 - Remote control button functions may differ for different products. Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not ...
Page 18 - To place batteries in the remote control
18 TOOLS INFO MAGICINFO 3D LOCK PC A DVI B HDMI C DP D EXIT RETURN Display information on the screen. Move to the upper, lower, left or right menu, or adjust an option's setting.Confirm a menu selection. Exit the current menu. Manually select a connected input source from PC , DVI , HDMI . It sets s...
Page 19 - Before Installing the Product; Tilting Angle and Rotation; Ventilation; Installation on a Perpendicular Wall
19 Before Installing the Product (Installation Guide) 15 ˚ To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount. • Otherwise, it may fall and cause pers...
Page 20 - Installation on an Indented Wall; Plane view; Dimensions; Model name
20 A B C E Figure 1.3 Side view D D Figure 1.2 Side view Installation on an Indented Wall ― Contact Samsung Customer Service Centre for further details. Plane view A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ― When installing the product on an in...
Page 21 - Installing the Wall Mount; Installing the Wall Mount Kit
21 Installing the Wall Mount Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall.For detailed information on installing the wall mount, see the instructions provided with the wall mount.We recommend you contact a technician for assistance wh...
Page 23 - Cable Connection; Pin
23 Remote Control (RS232C) Cable Connection RS232C Cable Interface RS232C (9 pins) Pin TxD (No.2), RxD (No.3), GND (No.5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15 m (only shielded type) • Pin assignment 1 2 3 4 5 6 7 8 9 Pin Signal 1 Detect dat...
Page 24 - Connection
24 • RS232C cableConnector: 9-Pin D-Sub to Stereo Cable 1 5 9 6 -P2- 1 2 3 -P1- -P1- -P1- -P2- -P2- Female RxTxGnd 235 --------><------------------ 325 TxRxGnd STEREOPLUG(3.5ø) Connection • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT
Page 25 - Control Codes; Viewing control state (Get control command)
25 Control Codes Viewing control state (Get control command) Header Command ID Data length Checksum 0xAA Command type 0 Controlling (Set control command) Header Command ID Data length Data Checksum 0xAA Command type 1 Value Command No. Command type Command Value range 1 Power control 0x11 0~1 2 Volu...
Page 26 - Power control; Volume control
26 Power control • FunctionA product can be powered on and off using a PC. • Viewing power state (Get Power ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting power ON/Off (Set Power ON / OFF) Header Command ID Data length Data Checksum 0xAA 0x11 1 "Power" "Pow...
Page 27 - Input source control
27 Input source control • FunctionThe input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command ID Data length Data Checksum 0xAA 0x14 1 &...
Page 28 - Screen mode control; Screen size control
28 Screen mode control • FunctionThe screen mode of a product can be changed using a PC.Screen mode cannot be controlled when the Video Wall function is enabled. ― This control can only be used on models that include a TV. • Viewing screen status (Get Screen Mode Status) Header Command ID Data lengt...
Page 29 - Auto adjustment control (PC and BNC only)
29 PIP On/Off control • FunctionThe PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if Video Wall is set to On . ― This function is not available in MagicInfo . • Viewing PIP on/off state (Get the PIP ON...
Page 30 - Video Wall Mode Control
30 Video Wall Mode Control • Function Video Wall mode can be activated on a product using a PC. This control is only available on a product whose Video Wall is enabled. • Viewing video wall mode (Get Video Wall Mode) Header Command ID Data length Checksum 0xAA 0x5C 0 • Setting the video wall (Set Vi...
Page 34 - Connecting and Using a Source Device; Before Connecting; Pre-connection Checkpoints; Connecting to a PC
34 Connecting and Using a Source Device Chapter 03 Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. Pre-connection Checkpoints ― Befor...
Page 35 - Connection using a DVI cable (Digital type); Connection Using an HDMI-DVI Cable
35 Connection using a DVI cable (Digital type) DVI IN RGB / DVI / HDMI / AV / COMPONENT AUDIO IN Connection Using an HDMI-DVI Cable ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. HDMI IN RGB / DVI / HDMI / A...
Page 36 - Connection Using an HDMI Cable
Page 37 - Connecting to a Video Device; Connection Using the AV Cable; Connection Using the component Cable
37 Connecting to a Video Device • Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable. • You can connect a video device to the product using a cable. ― Connecting parts may differ in different products. ― Press ...
Page 38 - Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
38 Connection Using an HDMI-DVI Cable ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a video device to the product using an HD...
Page 39 - Connecting to an Audio System; Changing the Input source; Source
39 Connecting to an Audio System ― Connecting parts may differ in different products. AUDIO OUT Changing the Input source HDMI PC PC HDMI-CEC BD Player DVI ---- Component AV Source - The displayed image may differ depending on the model. Source MENU m : T Applications Source List ENTER Source allows...
Page 40 - Using MDC; Configuring Settings for Multi Control; Configuring settings for Multi Control
40 Using MDC Chapter 04 Configuring Settings for Multi Control MENU m → System → Multi Control → ENTER E Assign an individual ID to your product. Configuring settings for Multi Control • ID Setup Assign an ID to a set. (Range: 0~99)Press ▲ / ▼ to select a number, and press E . • ID Input Enter the I...
Page 41 - MDC Programme Installation/Uninstallation
41 MDC Programme Installation/Uninstallation Installation 1 Click the MDC Unified installation programme. 2 Select a language for installation. Next, click " OK ". 3 When the " Welcome to the InstallShield Wizard for MDC_Unified " screen appears, click " Next ". 4 In the "...
Page 42 - Connecting to MDC
42 What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports ...
Page 43 - Screen Adjustment; Picture Mode; Picture; Backlight
43 Screen Adjustment Configure the Picture settings ( Backlight , Colour Tone , etc.). - The layout of the Picture menu options may vary depending on the product. Chapter 05 Picture Mode MENU m : T Picture Picture Mode ENTER 100 100 45 50 50 50 50 · · · · · · Picture Backlight Contrast Brightness Sh...
Page 44 - Input source
44 Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) MENU m : T Picture ENTER 100 100 45 50 50 50 50 · · · · · · Picture Backlight Contrast Brightness Sharpness Colour Tint (G/R) 100 100 45 50 50 50 Picture Mode Information G50 R - The displayed image may differ depending on the mo...
Page 45 - Picture Size; Position; Picture Size
45 Picture Size MENU m : T Picture Picture Size ENTER · Picture Size Position Resolution Select Picture Size Off 16:9 - The displayed image may differ depending on the model. Picture Size If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we high...
Page 46 - Picture Sizes available by Input Source.; Input Source
46 Picture Sizes available by Input Source. Input Source Picture Size AV , Component (480i, 480p) 16:9 / Zoom1 / Zoom2 / 4:3 / Custom Component (1080i, 1080p) 16:9 / Wide Fit / 4:3 / Screen Fit / Custom HDMI (720p, 1080i, 1080p) 16:9 / 4:3 / Smart View 1 / Smart View 2 / Custom / Wide Fit / Screen F...
Page 48 - Resolution Select; Auto Adjustment
48 Resolution Select · Picture Size Position Resolution Select Picture Size Off 16:9 - Available in PC mode only. - The displayed image may differ depending on the model. If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture ...
Page 49 - PC Screen Adjustment; Fine
49 PC Screen Adjustment PC Screen Adjustment Fine Position Image Reset Coarse 0 50 - The displayed image may differ depending on the model. • Coarse / Fine Removes or reduces picture noise.If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as po...
Page 50 - PIP; PIP Settings; Main picture
50 PIP MENU m : T System PIP ENTER Picture PIP - The displayed image may differ depending on the model. - For PIP sound, refer to the Sound Select instructions. - If you turn the product off while watching in the PIP mode, the PIP function is reset to off. When you turn your product on, you must tur...
Page 51 - Advanced Settings; Dynamic Contrast; Dynamic Contrast
51 Advanced Settings MENU m : T Picture Advanced Settings ENTER Advanced Settings Black Tone Flesh Tone RGB Only Mode Colour Space Dynamic Contrast Off 0 Off Native Medium - The displayed image may differ depending on the model. Input Source Picture Mode Advanced Settings PC , DVI , HDMI (when a PC ...
Page 52 - White Balance; Colour Space; Gamma; Motion Lighting
52 Advanced Settings White Balance Gamma Motion Lighting Colour Space Native 0 Off - The displayed image may differ depending on the model. Colour Space Adjusts the range and variety of colours (the colour space) available to create images. • Auto / Native White Balance Adjust the colour temperature...
Page 53 - Picture Options; Colour Tone
53 Picture Options MENU m : T Picture Picture Options ENTER Picture Options Colour Temp. Digital Clean View MPEG Noise Filter HDMI Black Level Film Mode Auto Motion Plus Dynamic Backlight Colour Tone 10000K Off Off Normal Off Off Off Standard - The displayed image may differ depending on the model. ...
Page 55 - Auto Motion Plus; Film Mode
55 Picture Options Auto Motion Plus Dynamic Backlight Film Mode Off Off Off - The displayed image may differ depending on the model. Film Mode This mode is suitable to view movies.Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum qua...
Page 56 - Picture Off; Reset Picture; Reset Picture
56 Picture Off Picture Reset Picture Picture Off - The displayed image may differ depending on the model. The product screen is turned off but the audio will continue. Press any key on your remote to turn the screen back on. Reset Picture Picture Reset Picture Picture Off - The displayed image may d...
Page 57 - Sound Mode; Sound; Sound Effect
57 Sound Adjustment Configure the sound ( Sound ) settings for the product. Chapter 06 Sound Mode MENU m : T Sound Sound Mode ENTER Sound Sound Effect Speaker Settings Reset Sound Sound Mode Standard - The displayed image may differ depending on the model. You can select a sound mode to suit your pe...
Page 59 - Speaker Settings; Reset Sound
59 Speaker Settings MENU m : T Sound Speaker Settings ENTER Sound Sound Effect Speaker Settings Reset Sound Sound Mode Standard - The displayed image may differ depending on the model. • Speaker Select ( External / Internal / Receiver ) If you are listening to the sound track of a broadcast or movie...
Page 60 - Source List; Source List; Refresh
60 Applications Chapter 07 Source List Source allows you to select a variety of sources and change source device names. You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source. ― The input source can also b...
Page 61 - Menu Language; Menu Language
61 System Chapter 08 Menu Language MENU m : T System Menu Language ENTER Off System Multi Control Time Eco Solution Screen Burn Protection Ticker Menu Language English - The displayed image may differ depending on the model. Set the menu language. ― A change to the language setting will only be appl...
Page 62 - Multi Control
62 Multi Control MENU m : T System Multi Control ENTER System Multi Control Time Eco Solution Screen Burn Protection Ticker Menu Language English Off - The displayed image may differ depending on the model. Configuring settings for Multi Control • ID Setup Assign an ID to a set. (Range: 0~99)Press o...
Page 63 - Time; Sleep Timer; Sleep Timer
63 Time MENU m : T System Time ENTER Off Time Sleep Timer Clock Set - The displayed image may differ depending on the model. You can configure Clock Set or Sleep Timer . You can also set the product to automatically turn on or off at a specified time using the Timer function. Clock Set Set the clock...
Page 64 - Off Timer; On Timer
64 Time Off Timer Holiday Management On Timer - The displayed image may differ depending on the model. On Timer Set On Timer so that your product turns on automatically at a time and on a day of your choosing. The power is turned on with the specified volume or input source. On Timer : Set the on ti...
Page 65 - Holiday Management
65 Time Off Timer Holiday Management On Timer - The displayed image may differ depending on the model. Off Timer Set the off timer ( Off Timer ) by making a selection from one of the seven options. ( Off Timer 1 ~ Off Timer 7 ) ― You must set the clock before you can use Off Timer . • Setup : Select...
Page 66 - Eco Solution; Eco Sensor; Eco Sensor; Auto Power Off
66 Eco Solution MENU m : T System Eco Solution ENTER Off Off Eco Solution Eco Sensor Auto Power Off Energy Saving Off - The displayed image may differ depending on the model. Energy Saving Reduce the power consumption by adjusting the screen brightness. • Off / Low / Medium / High Eco Sensor To enha...
Page 67 - Screen Burn Protection; Pixel Shift; Pixel Shift; Available Pixel Shift Settings and Optimum Settings.; Available Settings
67 Screen Burn Protection MENU m : T System Screen Burn Protection ENTER Screen Burn Protection Timer Immediate display Side Grey Pixel Shift Off Off Off Off - The displayed image may differ depending on the model. To reduce the possibility of screen burn, this unit is equipped with Pixel Shift scre...
Page 68 - Timer
68 Screen Burn Protection Timer Immediate display Side Grey Pixel Shift Off Off Off Off - The displayed image may differ depending on the model. Timer You can set the timer for Screen Burn Protection . The Pixel Shift feature stops automatically after a specified period of time. • Off • Repeat : Dis...
Page 69 - Immediate display; Side Grey
69 Screen Burn Protection Timer Immediate display Side Grey Pixel Shift Off Off Off Off - The displayed image may differ depending on the model. Immediate display Select the screen saver you want to display immediately. • Off / Pixel / Rolling bar / Fading screen Side Grey When the screen is set to ...
Page 71 - Full; Format; Horizontal
71 Video Wall MENU m : T System Video Wall ENTER · · · · Video Wall Full 1 1 Format Horizontal Vertical Screen Position Video Wall On - The displayed image may differ depending on the model. - Some models may not support the MagicInfo function. - The Video Wall option is only enabled when PIP is set...
Page 72 - Vertical
72 · · · · Video Wall Full 1 1 Format Horizontal Vertical Screen Position Video Wall On - The displayed image may differ depending on the model. Vertical This function automatically divides the screen according to the specified number of vertical displays.Enter the number of vertically arranged disp...
Page 73 - Source AutoSwitch Settings; Source AutoSwitch; Primary Source
73 Source AutoSwitch Settings MENU m : T System Source AutoSwitch Settings ENTER · · · Source AutoSwitch Settings Off All PC Primary Source Recovery Primary Source Secondary Source Source AutoSwitch On - The displayed image may differ depending on the model. Turning on the display with Source AutoSw...
Page 74 - Change PIN
74 Change PIN MENU m : T System Change PIN ENTER System Change PIN - The displayed image may differ depending on the model. The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN . Reenter the same 4 digits in Confirm New PIN . When the Confirm screen disap...
Page 75 - General; Game Mode
75 General MENU m : T System General ENTER Off Off Off Off Off Off General Game Mode Auto Power Safety Lock Button Lock Standby Control Lamp Schedule Max. Power Saving On - The displayed image may differ depending on the model. Max. Power Saving Turns off the product to reduce power consumption afte...
Page 76 - Button Lock; Standby Control; Lamp Schedule
76 Off Off Off Off Off Off General Game Mode Auto Power Safety Lock Button Lock Standby Control Lamp Schedule Max. Power Saving On - The displayed image may differ depending on the model. Button Lock This menu can be used to lock the buttons on the product. Only the remote control can control the pr...
Page 77 - OSD Display; Power On Adjustment
77 General Power On Adjustment Temperature Control 0 Sec 77 OSD Display - The displayed image may differ depending on the model. OSD Display Displays or hides a menu item on the screen. ― Source OSD / No Signal OSD / MDC OSD Power On Adjustment You can set the warm-up time for the screen to turn on ...
Page 78 - Auto Turn Off; Description
78 Anynet+ (HDMI-CEC) MENU m : T System Anynet+ (HDMI-CEC) ENTER Anynet+ (HDMI-CEC) Auto Turn Off Anynet+ (HDMI-CEC) Yes On - The displayed image may differ depending on the model. - The Anynet+ (HDMI-CEC) functions do not operate with other manufacturers’ products. - For instructions explaining how...
Page 79 - Switching between Anynet+ Devices
79 Anynet+ (HDMI-CEC) Auto Turn Off Anynet+ (HDMI-CEC) Yes On - The displayed image may differ depending on the model. Auto Turn Off Setting an Anynet+ Device to turn Off automatically when the product is turned off. • No / Yes ― If Auto Turn Off is set to Yes , running external devices will turn of...
Page 80 - Troubleshooting for Anynet+; Problem
80 Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • You can connect only one receiver (home theatre). • Check if the Anynet+ device power cord is properly connected. • Check th...
Page 82 - Reset System; Magic Clone; Clone From USB
82 Reset System MENU m : T System Reset System ENTER System Reset System - The displayed image may differ depending on the model. This option returns the current settings under system to the default factory settings. Magic Clone MENU m : T System Magic Clone ENTER Magic Clone Clone From USB Clone to...
Page 83 - Reset All
83 Reset All MENU m : T System Reset All ENTER System Reset All - The displayed image may differ depending on the model. This option returns all the current settings for a display to the default factory settings.
Page 84 - Software Update; By USB; Contact Samsung
84 Support Chapter 09 Software Update MENU m : T Support Software Update ENTER The Software Update menu lets you upgrade your product software to the latest version. ― Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing ...
Page 85 - Testing the Product; Checking the Resolution and Frequency
85 Troubleshooting Guide Chapter 10 Requirements Before Contacting Samsung Customer Service Centre Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Testing the Product Check if your product is operating no...
Page 86 - Check the followings.; Screen issue
86 Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product a...
Page 89 - Sound issue
89 Sound issue There is no sound. Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software programme. Video is ava...
Page 90 - Remote control issue
90 Sound issue There is audible sound when the volume is muted. When Speaker Select is set to External , the volume button and mute function are disabled. Adjust the volume for the external speakers. Audio settings for main speakers are separate from the internal speakers on the product.Changing or ...
Page 91 - Other issue
91 Other issue The PIP menu is not available. The menu is enabled or disabled depending on the Source mode. ― Refer to page 50 for details about the PIP menu. When I try to change the PC resolution, a message " The defined resolution is not supported. " appears. The message " The defined...
Page 95 - Specifications; Model Name
95 Specifications Chapter 11 - Size - Display area H V - Dimensions ( W x H x D) W D H General Model Name ED32D ED40D ED46D ED55D Panel Size 32 Class (31.5" / 80 cm) 40 Class (40" / 101 cm) 46 Class (45.9" / 116 cm) 55 Class (54.6" / 138 cm) Display area 697.6845 mm (H) x 392.256 mm ...
Page 97 - PowerSaver
97 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the colour of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any ...
Page 98 - Resolution
98 - Horizontal FrequencyThe time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. - Vertical FrequencyThe product displays a...
Page 100 - NORTH AMERICA
100 Appendix Chapter 12 Contact SAMSUNG WORLD WIDE Web site: http://www.samsung.com ― If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) CANADA 1-800-SAMSUNG (726-7864) LATIN AMERICA ARGENT...
Page 101 - LATIN AMERICA
101 LATIN AMERICA COSTA RICA 0-800-507-726700-800-1-SAMSUNG (726-7864) DOMINICA 1-800-751-2676 ECUADOR 1-800-10-726701-800-SAMSUNG (72-6786) EL SALVADOR 800-6225 GUATEMALA 1-800-299-00131-800-299-0033 HONDURAS 800-27919267800-2791-9111 JAMAICA 1-800-234-72671-800-SAMSUNG (726-7864) MEXICO 01-800-SAM...
Page 103 - EUROPE
103 EUROPE GREECE 80111-SAMSUNG (80111 726 7864) only from land line(+30) 210 6897691 from mobile and land line HUNGARY 0680SAMSUNG (0680-726-786)0680PREMIUM (0680-773-648) ITALIA 800-SAMSUNG (800.7267864) LATVIA 8000-7267 LITHUANIA 8-800-77777 LUXEMBURG 261 03 710 MONTENEGRO 020 405 888 NETHERLANDS...
Page 105 - CHINA
105 CHINA CHINA 400-810-5858 HONG KONG (852) 3698 4698 MACAU 0800 333 S.E.A AUSTRALIA 1300 362 603 INDONESIA 021-5699777708001128888 JAPAN 0120-363-905 MALAYSIA 1800-88-9999603-77137477 (Overseas contact) MYANMAR 01-2399888 NEW ZEALAND 0800 726 786 PHILIPPINES 1-800-10-7267864 [PLDT ]1-800-8-7267864...
Page 106 - MENA
106 S.W.A BANGLADESH 09612300300 INDIA 1800 3000 8282 - Toll Free1800 266 8282 - Toll Free SRI LANKA 00941175405400094115900000 MENA ALGERIA 021 36 11 00 BAHRAIN 8000-GSAM (8000-4726) EGYPT 08000-72678616580 IRAN 021-8255 JORDAN 0800-2227306 5777444 KUWAIT 183-CALL (183-2255) MOROCCO 080 100 22 55 O...
Page 108 - AFRICA
108 AFRICA SOUTH AFRICA 0860 SAMSUNG (726 7864) SUDAN 1969 TANZANIA 0800 755 755 UGANDA 0800 300 300 ZAMBIA 0211 350370
Page 109 - Responsibility for the Pay Service (Cost to; Not a product defect; Others
109 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. • If a ...
Page 110 - Correct Disposal; Correct Disposal of This Product (Waste Electrical &
110 Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB c...
Page 111 - Optimum Picture Quality and Afterimage; Optimum Picture Quality; Prevention of Afterimage Burn-in; Preventing afterimage burn-in; FLIGHT
111 Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality • Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product performance. - The number of sub-pixels by pan...
Page 113 - Licence
113 Licence Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol are trademarks of Dolby Laboratories. Premium Sound 5.1 ® Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723...
Page 114 - Terminology
114 Terminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above refers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending on the scanning method.- ScanningScanning r...
