Page 3 - Contents
1 EN Contents Using This Manual 2Safety 3 Electrical safety 3 Child safety 3 Safety during use 4 Safety when cleaning 4 Disposal Instructions 4Installing the Hob 5 Regulations and compliance 5 Safety instructions for the installer 5 Connecting to the outlet 6 Installing into the countertop 6 Parts a...
Page 4 - Using This Manual; The following symbols are used in the text; Warning
2 EN Using This Manual Please take the time to read this owner’s manual, paying particular attention to the safety information contained in the following section, before using your appliance Keep this manual for future reference If transferring ownership of the appliance, please remember to pass the...
Page 5 - Safety; Electrical safety; Child safety
3 EN Safety The safety aspects of this appliance comply with accepted technical standards and the German Appliance Safety Law However, as manufacturers we also believe it is our responsibility to familiarise you with the following safety instructions Electrical safety • Be sure the appliance is prop...
Page 6 - Safety during use; Safety when cleaning; Disposal Instructions; Disposing of the packaging material
4 EN Safety (continued) Safety during use • This appliance is to be used only for normal cooking and frying in the home It is not designed for commercial or industrial use • Never use the hob for heating the room • Take care when plugging electrical appliances into mains sockets near the hob Mains l...
Page 7 - Installing the Hob; Important; Regulations and compliance
5 EN Installing the Hob Important : Be sure the new appliance is installed and grounded only by qualified personnel Please observe this instruction The warranty will not cover any damage that may occur as a result of improper installation Technical data is provided at the end of this manual Regulati...
Page 8 - Connecting to the outlet; Installing into the countertop
EN Installing the Hob (Continued) Connecting to the outlet Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the rating plate, corresponds to the available supply voltage The rating plate is located on the lower casing of the hob The heating element v...
Page 9 - Parts and Features; Cooking zones and control panel
7 EN Parts and Features Cooking zones and control panel Single cooking zone 1950W Single cooking zone 1300 W Control panel Heat setting selectors Indicators for heat settings and residual heat “Lock” control sensor “On/Off” control sensor Timer indicator and control sensors C21RJAN_XSA-00144A_EN.ind...
Page 10 - Components
EN Parts and Features (Continued) Components 1 Ceramic Glass Hob 2 Installation Brackets 3 Screws C21RJAN_XSA-00144A_EN.indd 8 2008-10-07 5:01:15
Page 11 - The key features of your appliance; • Ceramic glass cooking surface:
9 EN Parts and Features (Continued) The key features of your appliance • Ceramic glass cooking surface: The appliance has a ceramic glass cooking surface and four rapid - response cooking zones The hob’s powerful radiant heater elements significantly shorten the amount of time required for the zones...
Page 12 - Safety shutoff; Other reasons why a cooking zone will switch itself off; Residual heat indicator
10 EN Parts and Features (Continued) Safety shutoff If one of the cooking zones is not switched off or the heat setting is not adjusted after an extended period of time, that particular cooking zone will automatically switch itself off Any residual warmth will be indicated with (for “hot”) in the di...
Page 13 - Before You Begin; Initial cleaning; Hob Use; Using suitable cookware; Energy saving tips
11 EN Before You Begin Initial cleaning Wipe the ceramic glass surface with a damp cloth and ceramic hob glass cleaner Important: Do not use caustic or abrasive cleaners The surface could be damaged Hob Use Using suitable cookware Better pans produce better results • You can recognise good pans by t...
Page 14 - Using the touch control sensors
12 EN Hob Use (Continued) • Always position pots and pans before switching on the cooking zone • Dirty cooking zones and pan bases increase power consumption • When possible, position the lids firmly on the pots and pans to cover completely. • Switch the cooking zones off before the end of the cooki...
Page 15 - Switching the appliance on; ” control sensor; Temperature control
13 EN Hob Use (Continued) Switching the appliance on Touch the “Lock ” sensor for approximately 3 seconds The appliance is switched on using the “On / Off ” control sensor Touch the “On / Off ” sensor The digital displays will show After the “On / Off ” sensor has been actuated to switch on your app...
Page 16 - Switching the appliance off; Switching a cooking zone off
14 EN Hob Use (Continued) Switching the appliance off To completely switch off the appliance, use the “On / Off ” control sensor Touch the “On / Off ” sensor After switching off a single cooking zone or the entire cooking surface, the presence of residual heat will be indicated in the digital displa...
Page 17 - Using the child safety lock; Switching the child safety lock on; approx 3 sec
15 EN Hob Use (Continued) Using the child safety lock You can use the child safety lock to safeguard against unintentionally turning on a cooking zone and activating the cooking surface The lock control sensor can be used only when the power is on Switching the child safety lock on 1 Touch the contr...
Page 18 - Switching the child safety lock off; Locking and unlocking the control panel
1 EN Hob Use (Continued) Switching the child safety lock off 1 Touch the control sensor for approximately 3 seconds An acoustic signal will sound as confirmation. Locking and unlocking the control panel At any stage during the cooking process, the control panel, with the exception of the “On / Off ”...
Page 19 - Timer; Using the timer as a safety shutoff; Setting the safety shutoff
17 EN Hob Use (Continued) Timer There are two ways to use the timer: Using the timer as a safety shutoff If a specific time is set for a cooking zone, the cooking zone will shut itself off once this period of time has elapsed This function can be used for multiple cooking zones simultaneously Using ...
Page 20 - Countdown timer; Switch Setting
1 EN Hob Use (Continued) To display the time remaining for any of the cooking zones, use the timer’s control sensor The corresponding control indicator will begin to blink slowly The settings are reset using the or timer setting control sensors After the set period of time has elapsed, the cooking z...
Page 21 - Cleaning and Care; Hob; Light Soiling; Stubborn Soiling
19 EN Cleaning and Care Hob Important: Cleaning agents must not come into contact with a heated ceramic glass surface: All cleaning agents must be removed with adequate amounts of clean water after cleaning because they can have a caustic effect when the surface becomes hot Do not use any aggressive...
Page 22 - To avoid damaging your appliance
20 EN Cleaning and Care (Continued) Problem Dirt 1 Remove burnt-on sugar, melted plastic, aluminium foil or other materials with a glass scraper immediately and while still hot Important : There is a risk of burning yourself when the glass scraper is used on a hot cooking zone: 2 Clean the hob as no...
Page 23 - Warranty and Service; FAQs and troubleshooting; What should I do if the cooking zones are not functioning?; What should I do if the
21 EN Warranty and Service FAQs and troubleshooting A fault may result from a minor error that you can correct yourself with the help of the following instructions Do not attempt any further repairs if the following instructions do not help in each specific case. Warning: Repairs to the appliance ar...
Page 24 - What does it mean when the burner does not glow red?; Service; Is it a technical fault?
22 EN Warranty and Service (Continued) What does it mean when the burner does not glow red? • The selected temperature of the cooking zone is maintained by a sensor that cycles the zone on and off, so the surface cooking area will not always glow red If you select a low heat setting, the heat will c...
Page 25 - Technical Data; Appliance dimensions
23 EN Technical Data Appliance dimensions Width 288 mm Depth 505 mm Height 50 mm Worktop cut - out dimensions Width 273 mm Depth 490 mm Corner radius 3 mm Cooking rings Position Diameter Power Front 148 mm 1,300 W Rear 183 mm 1,950 W Connection voltage 240 V ~ 50 Hz Maximum connected load power 3 25...
Page 26 - Note
24 EN Note C21RJAN_XSA-00144A_EN.indd 24 2008-10-07 5:01:21
