Samson Wireless System Manager for Windows 95 - Manual

Software Installation Before installing your WSM software, you need tomake sure that the external MIDI port on your SoundBlaster 16 card is enabled. To do so, click on the Startbutton and go to Settings -> Control Panel. Once theWindows Control Panel is open, select the“Multimedia” option, as sho...

Launching WSM Before launching WSM, make sure all receivers are interconnected correctly (as per the instructionsgiven on the preceding pages) and powered on. Then boot up your computer and double-click on the“Shortcut to WSM” icon to launch the program. Because WSM uses all driver resources of the ...

Quick Star t To Monitor Conditions In Connected Receivers From Monitor Mode, click on the Play icon (the far left icon) in the Transport Tool Bar. All RFand AF Level meters in the Monitor screen are now active and show continuous changes inRF and AF levels. To Change Conditions in Connected Receiver...

Quick Star t To Per form An RF Spectrum Analysis Go to Spectrum Analyze Mode, either by selecting it from the Window menu, or by clicking on theSpectrum Analyze icon in the Tool Bar. If you are using both UR6D and UR6DX receivers simultaneous-ly, call up the Group Select dialog either by opening the...

10 Monitor Mode In Monitor mode, you can remotely monitor and control up to eight connected UR6D or UR6DX UHFwireless receivers. The main areas of the Monitor Mode screen (as shown on page 7 of this manual)are as follows: 1: Menus - The Monitor Mode screen provides seven menus (File, Monitor, Timer,...

11 The Simple Monitor Screen When in Monitor Mode, the WSM screen shows a lot of information—so much, in fact, that there may be times when you want a simpler screen display with less data and larger meters (for example, when yourcomputer monitor is a distance away from your working position). For t...

12 Monitor Mode Tool Bar WSM’s Tool Bar provides graphic icons that allow you to carry out various operations with a single mouse click. Though available in all screens and in all modes of operation, you can opt to turn it on or offby checking or unchecking the Tool Bar option in the Display menu (s...

13 Monitor Mode Menus Each screen and mode of operation also provides a number of menus. Here is a description of thevarious menu titles and options available when in Monitor Mode (the same menu items areavailable in both the main Monitor screen and the Simple Monitor screen): File - Options here al...

14 Time Domain Mode Time Domain Mode allows you to view data that has beenrecorded in Monitor Mode. To enter Time Domain Mode, eitherselect it from the Window menu, or click on the Time Domainicon in the Tool Bar. To determine which parameters you wish to see graphed out,select “Drawing Condition” f...

15 Time Domain Mode / Spectrum Analyze Mode At any time, you can opt to graph different parameters for the selected receiver, or to view the data for adifferent receiver altogether, simply by calling up the Time Domain Configuration dialog again. Todetermine the actual time of any point in the graph...

FCC Rules and Regulations Samson wireless systems are type accepted under FCC rules parts 90, 74 and 15. Licensing of Samson equipment is the user’s responsibility and licensability depends on the user’s classification, application and frequency selected. This device complies with RSS-210 of Industr...