Samson Wireless System Manager for Windows 95 - Manuals

Page 2 - Table of Contents

Produced by On The Right Wavelength for Samson Technologies Corp. Copyright 1998, Samson Technologies Corp. Printed April, 1998 Samson Technologies Corp.575 Underhill Blvd.P.O. Box 9031Syosset, NY 11791-9031Phone: 1-800-3-SAMSON (1-800-372-6766)Fax: 516-364-3888 Table of Contents Introduction 1 Hard...

Page 3 - Introduction / Hardware Interconnections; Introduction; WSM; WSM

Introduction / Hardware Interconnections Introduction Congratulations on your purchase of the Samson Wireless System Manager! This remarkable accessorypackage for the Samson Synth Series 6 UHF Wireless System includes Windows 95-compatible softwareand all required hardware for complete computer cont...

Page 4 - Hardware Interconnections

2 Hardware Interconnections All required cabling is included in the WSM package: one PC connector cable, four long 8-pin mini-DINconnector cables, and seven short 8-pin mini-DIN connector cables: As shown in the illustration on the left, begin by connectingone end of the PC connector cable to the jo...

Page 7 - Software Installation

Software Installation Before installing your WSM software, you need tomake sure that the external MIDI port on your SoundBlaster 16 card is enabled. To do so, click on the Startbutton and go to Settings -> Control Panel. Once theWindows Control Panel is open, select the“Multimedia” option, as sho...

Page 9 - Launching WSM

Launching WSM Before launching WSM, make sure all receivers are interconnected correctly (as per the instructionsgiven on the preceding pages) and powered on. Then boot up your computer and double-click on the“Shortcut to WSM” icon to launch the program. Because WSM uses all driver resources of the ...

Page 10 - Quick Star t

Quick Star t To Monitor Conditions In Connected Receivers From Monitor Mode, click on the Play icon (the far left icon) in the Transport Tool Bar. All RFand AF Level meters in the Monitor screen are now active and show continuous changes inRF and AF levels. To Change Conditions in Connected Receiver...

Page 11 - To Per form An RF Spectrum Analysis

Quick Star t To Per form An RF Spectrum Analysis Go to Spectrum Analyze Mode, either by selecting it from the Window menu, or by clicking on theSpectrum Analyze icon in the Tool Bar. If you are using both UR6D and UR6DX receivers simultaneous-ly, call up the Group Select dialog either by opening the...

Page 12 - Monitor Mode

10 Monitor Mode In Monitor mode, you can remotely monitor and control up to eight connected UR6D or UR6DX UHFwireless receivers. The main areas of the Monitor Mode screen (as shown on page 7 of this manual)are as follows: 1: Menus - The Monitor Mode screen provides seven menus (File, Monitor, Timer,...

Page 13 - The Simple Monitor Screen

11 The Simple Monitor Screen When in Monitor Mode, the WSM screen shows a lot of information—so much, in fact, that there may be times when you want a simpler screen display with less data and larger meters (for example, when yourcomputer monitor is a distance away from your working position). For t...

Page 14 - Monitor Mode Tool Bar

12 Monitor Mode Tool Bar WSM’s Tool Bar provides graphic icons that allow you to carry out various operations with a single mouse click. Though available in all screens and in all modes of operation, you can opt to turn it on or offby checking or unchecking the Tool Bar option in the Display menu (s...

Page 15 - Monitor Mode Menus

13 Monitor Mode Menus Each screen and mode of operation also provides a number of menus. Here is a description of thevarious menu titles and options available when in Monitor Mode (the same menu items areavailable in both the main Monitor screen and the Simple Monitor screen): File - Options here al...

Page 16 - Time Domain Mode

14 Time Domain Mode Time Domain Mode allows you to view data that has beenrecorded in Monitor Mode. To enter Time Domain Mode, eitherselect it from the Window menu, or click on the Time Domainicon in the Tool Bar. To determine which parameters you wish to see graphed out,select “Drawing Condition” f...

Page 17 - Time Domain Mode / Spectrum Analyze Mode; Spectrum Analyze Mode

15 Time Domain Mode / Spectrum Analyze Mode At any time, you can opt to graph different parameters for the selected receiver, or to view the data for adifferent receiver altogether, simply by calling up the Time Domain Configuration dialog again. Todetermine the actual time of any point in the graph...

Page 19 - FCC Rules and Regulations

FCC Rules and Regulations Samson wireless systems are type accepted under FCC rules parts 90, 74 and 15. Licensing of Samson equipment is the user’s responsibility and licensability depends on the user’s classification, application and frequency selected. This device complies with RSS-210 of Industr...