Ryobi CFS1500- Manual
Ryobi CFS1500– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – SAVE THESE INSTRUCTIONS; WORK AREA; PERSONAL SAFETY; RULES FOR SAFE OPERATION; GENERAL SAFETY RULES
- Page 4 – SERVICE; SPECIFIC SAFETY RULES; ADDITIONAL RULES FOR SAFE
- Page 5 – SYMBOLS
- Page 6 – FEATURES
- Page 7 – UNPACKING; DOUBLE INSULATION
- Page 8 – ROTATING THE SANDING SHEETS; OPERATION; ATTACH SANDING SHEET/SCRUBBING PAD
- Page 9 – OPERATING YOUR SANDER
- Page 10 – MAINTENANCE; CLEANING THE SCRUBBING PADS
- Page 11 – NOTES
- Page 12 – Double Insulated; Ryobi Technologies Inc.; • SERVICE; MODEL NUMBER; EXTENSION CORD CAUTION
OPERATOR’S MANUAL
COMPACT FINISHING SANDER
MODEL CFS1500
DOUBLE INSULATED
SAVE THIS MANUAL FOR FUTURE REFERENCE
THANK YOU FOR BUYING A RYOBI SANDER.
Your new sander has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
SPECIFICATIONS:
Sanding Pad Length
5.5 in. (140 mm)
No Load Speed
12,000 opm
Rating
120 volts, 60 Hz, AC
.80 Amperes
Net Weight
2.0 lbs. (0.9 kg)
CAUTION: Carefully read through this entire operator's manual before using your new sander.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your sander properly and only for
what it is intended, you will enjoy years of safe, reliable service.
Please fill out and return the Warranty Registration Card so that we can be of future service to you.
Thank you again for buying a Ryobi sander.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Ryobi CFS1500
Summary
Page 3 SAVE THESE INSTRUCTIONS WORK AREA ■ Keep your work area clean and well lit. Clutteredbenches and dark areas invite accidents. ■ D o n o t o p e r a t e p o w e r t o o l s i n e x p l o s i v eatmospheres, such as in the presence of flammableliquids, gases, or dust. Power tools create sparks ...
Page 4 (A.W.G.) of at least 16 is recommended for an extensioncord 100 feet or less in length. A cord exceeding 100 feetis not recommended. If In doubt, use the next heaviergage. The smaller the gauge number, the heavier thecord. ■ Inspect tool cords periodically and if damaged, haverepaired at your...
Page 5 Page 5 SYMBOL NAME DESIGNATION/EXPLANATION Voltage Current Frequency (cycles per second) Time Type or a characteristic of current Type or a characteristic of current Rotational speed, at no load Designates Double Insulated Construction Tools Revolutions, strokes, surface speed, orbits etc. pe...
