Page 2 - IMPORTANT SAFETY INSTRUCTIONS
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, w...
Page 6 - IMPORTANT NOTES; Power Supply; Copyright
6 IMPORTANT NOTES Power Supply 301 • Do not connect this unit to the same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on the way in...
Page 8 - Contents
8 Contents USING THE UNIT SAFELY ............................................................................................................ 3 IMPORTANT NOTES ..................................................................................................................... 6 Checking the Content...
Page 9 - Checking the Contents of the Package; VS-700R Owner’s Manual
9 Checking the Contents of the Package As soon as you open the package, check that you have all of the included items. If anything is missing, contact your dealer. VS-700R I/O Unit fig.pane-vs700r.eps VS-700R Owner’s Manual This is the manual you’re reading. It explains how to add a VS-700R I/O unit...
Page 10 - USB Cable
10 Checking the Contents of the Package USB Cable Use this cable to connect the VS-700R I/O unit to your computer’s USB connector. * Please use the included USB cable. VS-700R_e1.book 10 ページ ２０１０年６月１５日 火曜日 午後４時５９分
Page 11 - Changes to the Settings; Normal setting
11 Using the VS-700R I/O in Standalone Mode To use the VS-700R I/O without connecting it to the VS-700C console, it needs to be set to “Standalone mode.” While in Standalone mode, AUX IN cannot be used. Changes to the Settings In order to use the VS-700R I/O in “Standalone mode,” you need to open th...
Page 12 - The Advantages of Connecting VS-700R I/O Units; Connections; Connect the second VS-700R I/O unit to your computer’s USB connector.
12 Connecting Two VS-700R I/O Units The Advantages of Connecting VS-700R I/O Units By connecting two VS-700R I/O units, you'll be able to take advantage of the audio input/output of the two units, have access to two synthesizers (Fantom VS), and be able to use two ARX expansion boards. You will need...
Page 13 - Connect the WORDCLOCK.; Regarding Monitoring; Example connections for monitoring; Connect the second unit’s SUB OUT to the first unit’s INPUT 7/8.
13 Connecting Two VS-700R I/O Units 3. Connect the WORDCLOCK. Use a BNC cable to connect the WORDCLOCK OUT connector of the first unit to the WORDCLOCK IN connector of the second unit. Set the audio clock source of the second unit to “Wordclock” (p. 20). Now the audio clock of the second unit will b...
Page 14 - Connecting the Power Cord
14 Connecting the Power Cord • Connect the power cord. fig.VS-700-connect04-e.eps VS-700C Rear Panel VS-700R Rear Panel Power Cord Power Cord to Power Outlet to Power Outlet VS-700R_e1.book 14 ページ ２０１０年６月１５日 火曜日 午後４時５９分
Page 15 - Turning the Power On; Start up your computer.; If the USB indicator of the VS-700R I/O unit isn’t lit
15 Turning the Power On 941 Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. 945 If you need to turn off the power completely, fi...
Page 16 - Connecting Recording Equipment; Connections to the Analog Jacks; Connecting a Mic; Connecting a Guitar or Bass
16 Connecting Recording Equipment fig.VS-700-rec01-mic-e.eps When connection cables with resistors are used, the volume level of equipment connected to the inputs (INPUT 1–8 jacks, AUX IN Jack) may be low. If this happens, use connection cables that do not contain resistors. Connections to the Analo...
Page 17 - Connections to the Digital Connectors; Connecting a Digital Audio Source
17 Connecting Recording Equipment fig.VS-700-rec02-digi-e.eps Howling could be produced depending on the location of microphones relative to speakers. This can be remedied by: 1. Changing the orientation of the microphone(s). 2. Relocating microphone(s) at a greater distance from speakers. 3. Loweri...
Page 18 - Switching the Sampling Rate; Close the software you’re using.
18 Switching the Sampling Rate Use the front panel [SAMPLE RATE] knob to select the sampling rate. To make the system reflect the new setting, you’ll need to cycle the power to the system. If you need to synchronize the VS-700 to another digital device, you must first set this knob to the same sampl...
Page 19 - Choose “Options|Audio” to display the “Audio Options” dialog box.; Setting SONAR’s Sampling Rate
19 Switching the Sampling Rate * In SONAR, you cannot change the sampling rate of a project that contains audio data. 1. Start up SONAR. 2. If an "Audio Driver Error" is displayed during startup, click [Use Anyway]. 3. Choose “Options|Audio” to display the “Audio Options” dialog box. 4. On t...
Page 20 - Audio Clock Source; Select the “MIC PRE” tab.
20 Audio Clock Source You can choose one of four types of clock source. The current clock source is shown by the front panel SYNC indicator. In the case of an external source, the indicator will light if synchronization is locked. The indicator will blink if synchronization is not locked If you’re u...
Page 21 - Installing the ARX Expansion Board; Port settings (MIDI input and audio output); Cautions When Installing an Expansion Board
21 Installing the ARX Expansion Board Up to one optional Expansion Board (ARX series; sold separately) can be installed in the VS-700R. For details on ARX expansion boards, refer to the owner’s manual of your ARX expansion board. For details on the ARX expansion editor (plug-in), refer to the online...
Page 22 - How to Install an Expansion Board
22 Installing the ARX Expansion Board Install the Expansion Board after removing the panel cover. 1. Before installing the Expansion Board, turn off the power of the VS-700R and all connected devices, and disconnect all cables, including the Power cable, from the VS-700R. 2. From the VS-700R, remove...
Page 23 - Gently lower the board into place.
23 Installing the ARX Expansion Board 4. Insert the board into the VS-700R’s non-latched board holders until you hear a click. fig.attach02.eps 5. Gently lower the board into place. fig.attach04.eps 6. From above, press down on the board at the three locations indicated in the illustration until the...
Page 24 - Unlatch the latched board holders.; Removing an Expansion Board
24 Installing the ARX Expansion Board To remove an expansion board, reverse the process by which you inserted it. 1. Unlatch the latched board holders. fig.attach08.eps 2. Verify that the two latched board holders are unlocked, then gently pull up the board and disconnect the connector. fig.attach09...
Page 25 - Installation de la carte d’expansion; (French Language for Canadian Safety Standard)
25 Installation de la carte d’expansion (French Language for Canadian Safety Standard) Un maximum de un carte d’expansion optionnelles (serie ARX; vendues separement) peuvent etre installees dans le VS-700R. • Veuillez suivre attentivement les instructions suivantes quand vous manipulez la carte afi...
Page 26 - Installation d’une carte d’expansion
26 Installation de la carte d’expansion Retirer le panneau inferieur avant d’installer les cartes d’expansion. 1. Avant d’installer la carte d’expansion Wave, coupez l’alimentation du VS-700R et de tous les appareils branches, et debranchez tous les cables du VS-700R, y compris le cable d’alimentati...
Page 27 - Abaisser la carte delicatement.
27 Installation de la carte d’expansion 4. Inserer la carte dans les supports non bloques jusqu’a ce qu’un clic se fasse entendre. fig.attach02f.eps 5. Abaisser la carte delicatement. fig.attach04.eps 6. Appuyer sur la carte aux trois points indiques sur l’illustration jusqu’a ce que les supports se...
Page 28 - la carte d’expansion a ete installee.; Retrait d’une carte d’expansion
28 Installation de la carte d’expansion Pour retirer une carte d’expansion, suivre le processus inverse du processus d’insertion. 1. Suivre les instructions donnees dans le guide d’utilisation de le VS-700R pour degager la fente ou la carte d’expansion a ete installee. fig.attach08.eps 2. Debloquer ...
Page 29 - Attaching the Rackmount Brackets; Install the unit in the rack as appropriate for your situation.
29 Attaching the Rackmount Brackets If you want to install the VS-700R I/O in a 19” rack, attach the included rackmount brackets. 1. Disconnect all connection cables from the VS-700R, including the power cord. 2. As shown in the illustration below, remove three screws each from the left and right si...
Page 31 - NOTICE; FEDERAL COMMUNICATIONS COMMISSION; DECLARATION OF CONFORMITY
31 This product complies with the requirements of EMCD 2004/108/EC and LVD 2006/95/EC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du ...
