Roland PC-60 - Manuals - manualsarea.com

Page 2 - Sheet Size; Size of the sheet which will be loaded on the PC-60 can be selected.; User Size; size of the media feeding direction.; SETTINGS & FUNCTIONS OF WINDOWS DRIVER

Sheet Size Width x Length (mm) Printing Area (mm) A4 210 x 297 173.3 x 176.1 A3 297 x 420 260.0 x 298.0 ANSI A 215.9 x 279.4 178.8 x 157.1 ANSI B 279.4 x 431.8 243.8 x 308.8 12inch x 33inch 304.8 x 838.2 268.2 x 715.2 16inch x 33inch 406.4 x 838.2 368.4 x 715.2 24inch x 33inch 609.6 x 838.2 571.6 x ...

Page 3 - Select the line width to be 0pt.; * Bitmap data and Vector data

3 4 5 Roland ColorCAMM PC-60 Properties (Size) 1 2 Cutting line can be selected and cutting speed can be set.Bitmap data will be printed instead of being cut. Please create the cutting line in vector data. Resolution Resolution for the Windows Driver to generae printing data can be selected. Time fo...

Page 4 - All the vector data will be cut. Only the bitmap data will be printed.; • None

1 2 How to select cutting• By Color Only the vector data pointed out by specific color can be cut.Similar colors won’t be cut. Only colors matched with the numbers selected in R, G and B will be cut. Other colorswill be printed. Cutting Speed Speed for cutting can be set. Cutting speed should be cha...

Page 5 - Only the cutting data will be sent to PC-60. Other data won’t be sent.

Sheet Size Feeding Rate A4 174mm A3 297mm ANSI A 156.4mm ANSI B 308.8mm 12inch x 33inch 715.2mm 16inch x 33inch 715.2mm 24inch x 33inch 715.2mm User Size Length of Printing Area Roland ColorCAMM PC-60 Properties (Output Option) 1 2 3 4 1 Output Data• When only selecting [Printing] Only the printing ...

Page 6 - How to check the color difference with each printing method.; • Gray Scale; Color data will be removed.; • BackPrint; When selecting this function, Gold and Silver can not be used.

2 Process PC-60 prints in full color using the process color. Do not select any of them when printing in Special Color. • Y.M.C.K PC-60 will print in order of Yellow --> Magenta --> Cyan --> Black. Printing result should be better by selecting this option when printing image with red and gr...

Page 7 - All the correction will be set back to the default.; because the standard of color will be missed.

Roland ColorCAMM PC-60 Properties (Image Correction) 1 1 Correction Value • Brightness Brightness of the image can be adjusted. Image will be brighter when the value is increased. Default is 0. • Contrast Contrast of the image can be adjusted. Contrast will be stronger when the value is increased. D...

Page 8 - NOTE

Left data will be used for explanation. How to Print from Adobe Illustrator 7.01 (Basic Operation) Start Illustrator7.01 and enter File --> Document Setup. Select [Use Page Setup] and click the [Page Setup] button. Select the [Size] Tab from the properties. Set the size so that the image can be f...

Page 11 - How to Print from CorelDRAW 7 (Basic Operation); Left data will be used

How to Print from CorelDRAW 7 (Basic Operation) Left data will be used for explanation. Start CorelDRAW 7 and enter File --> Print Setup. Enter the [Size] Tab from the properties. Set the size so that the image can be fit. Enter the [Cutting] Tab. Select [by Color] for cut lines with CorelDRAW 7....

Page 14 - How to Print Tile Page from Illustrator 7.01 (Advanced Operation)

How to Print Tile Page from Illustrator 7.01 (Advanced Operation) This section explains how to print tile page from Illustrator 7.01. Please read the section [How to Print from Illustrator 7.01 (Basic Operation) before trying this section. Data below will be used for explanation. Configure PC-60 as ...

Page 15 - Make sure to always select [FormFeed] when; Click OK button after completing the above settings.

Make sure that the image is inside the page displayed. Open the [Document Setup] and remove the check from the [Use Print Setup] and then open the [Properties] by clicking the [PageSetup]. We will devide the data in half so we will set the [Length] to the half of the size of the cur- rent size and p...

Page 17 - How to Print Tile Page from CorelDRAW 7 (Advanced Operation); M a k e s u r e t o a l w a y s s e l e c t

How to Print Tile Page from CorelDRAW 7 (Advanced Operation) This section explains how to print tile page from Illustrator CorelDRAW 7. Please read the section [How to Print from CorelDRAW 7 (Basic Operation) before trying this section. Left data will be used for explanation. Configure PC-60 as a de...

Page 19 - How to setup page; Set the size so that the image can be fit; How to Print from Adobe Illustrator 8.0

This guide explains the operation based on the fact that the Roland Windows Driver for Windows95/98 is used. Please be noted that the Windows Driver below the version 2.1 can not be used with Illustrator 8.0. Start Illustrator 8.0 and select [Document Setup] from [File]. Put check in [Use Print Setu...

Page 20 - Before Printing; How to create cut line with Illustrator 8.0

Make sure to set the [Weight] in Illustrator 8.0 to 0.1pt (0.04mm) for the lines to be cut. Make sure to select [by Color] for [Cutting] in the [Output Option] tab of the [Windows Driver Properties] Before Printing Remove the check from [Silmulate print colors on display] from the [Color] under [Fil...

Page 21 - Windows Driver; • Time Out Error is displayed.

What to do if . . . . Windows Driver • Time Out Error is displayed. This error is displayed sometimes when printing image file with a big size. Open the properties of PC-60 Windows Driver from the [Printers] folder in the [Settings] of Windows PC. Then increase the time for [Transmission Retry] in t...

Page 22 - • The printing and cutting positions doesn’t match.; NG; • Characters can not be printed or the outline can not be cut.

• PC-60 cuts but doesn’t print. When [Printing] is not selected, PC-60 doesn’t print. Make sure to select [Printing]. • Image is printed with Special Color at where it is not suppose to be printed. The color which has been print with Special Color is printed at where it is not supposed to be printed...