Roland S-4000D - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INSTRUCTIONS

2 IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightnin...

Page 3 - USING THE UNIT SAFELY

3 USING THE UNIT SAFELY 001-50 ● Connect mains plug of this model to a mains socket outlet with a protective earthing connection. ................................................................................................................................. 002a ● Do not open or perform any intern...

Page 5 - IMPORTANT NOTES; Power Supply

5 IMPORTANT NOTES 301 ● Do not connect this unit to the same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on the way in which the el...

Page 6 - Table of Contents

6 Table of Contents Main Features.......................................................................................... Cover IMPORTANT SAFETY INSTRUCTIONS ............................................................2 USING THE UNIT SAFELY ...........................................................

Page 7 - Panel Descriptions; Front Panel

7 Panel Descriptions REAC Ports 1–10 You can connect the master REAC device to the desired REAC port and split its output to other REAC ports. REAC ports 3 to 10 are compatible with REAC EMBEDDED POWER, and can supply power to devices compatible with REAC EMBEDDED POWER. When a REAC device is connec...

Page 8 - Rear Panel

8 Panel Descriptions Grounding Terminal If necessary, use this terminal to connect the S-4000D chassis to an external grounding source. * Never attempt to use the following sources for an external ground connection: • Water pipes (may result in shock or electrocution) • Gas pipes (may result in fire...

Page 9 - Turning the Power On and Off; Connecting the Power Cord; Turning the Power On

9 Turning the Power On and Off Connect one end of the supplied AC power cord to a grounded AC outlet, and the other end to the AC INPUT connector to provide power for the S-4000D’s internal power supply. To prevent the power cord from being unplugged inadvertently, you should secure the power cord i...

Page 10 - About Placement; Important Notes When Installing; Cooling-fan Intake Port and Ventilation Port

10 About Placement This unit performs forced cooling by means of a cooling fan. Give attention to the following points. • Never block the cooling-fan intake port or ventilation port in the rear panel. Doing so may cause the temperature of the unit’s interior to rise, resulting in malfunction caused ...

Page 11 - Using the REAC Connector Covers

11 About Placement If using commercially available Cat5e Ethernet cables, attach the supplied REAC connector covers to the connectors. * Attaching the REAC connector covers is a necessary measure to counter electromagnetic noise. Attach the rubber feet when not rack mounting the unit. Peel off the b...

Page 12 - Notes to Observe in Using the REAC System; Concerning REAC Cables and Their Handling

12 Notes to Observe in Using the REAC System The REAC cables used in digital snake systems employ computer network technology to enable transmission of multichannel audio signals. In very rare cases, however, noise may be generated when these systems are used in certain environments. If noise is pre...

Page 13 - System Connection Example; Connecting the S-4000D to a V-Mixing System

13 System Connection Example * The M-400 must be running system software version 2.0 or later. * The M-48 can be set and managed from the M-400 only if the M-48 is connected to the M-400’s REAC B port via the S-4000D. * In order to maintain the transmission quality of the digital REAC signal, use fu...

Page 14 - Connecting the S-4000D to an Analog Mixer System

14 System Connection Example * The S-1608 system must be running system software version 2.0 or later. If you’re using the S-4000 system, the S-4000 system must be running system software 2.1 or later. * In order to maintain the transmission quality of the digital REAC signal, use fully approved Cat...

Page 15 - Main Specifications

15 Main Specifications * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. Connectors REAC port: (RJ-45 EtherCon type) x 2REAC EMBEDDED POWER port: (RJ-45 EtherCon type) x 8 Indicators REAC EMBEDDED POWER: Red x 8LIN...

Page 16 - NOTICE; FEDERAL COMMUNICATIONS COMMISSION

16 For China This product complies with the requirements of EMCD 2004/108/EC and LVD 2006/95/EC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exi...