Roland PC-600 - Manual

13 Cut tab The Cut tab displays cut settings. Resolution- Changing this value from the default is not recommended. Passes- Specify how many times the blade will move over each line. Curve Quality- Select how smooth you would like the curves to be. Cutter Driver Options- Clicking this button launches...

14 Color Adjust tab The Color tab displays settings associated with the color quality of the image. Using the sliders on the tab, you can adjust the image quality. The sliders that appear vary, depending on which color mode is selected on the Print tab. In all modes, you can adjust the overall image...

15 3 To send a job to the printer, select the job from the print queue and then select Print from the File menu. The job prints. In addition to specifying how a job will print using the Printer and Job Properties dialog boxes, you can access a number of print settings directly from your design appli...

16 Deleting Jobs from the Print Monitor You can delete jobs or groups of jobs from the Print Monitor by selecting them and then clicking the Delete button from the toolbar. 1 Select the job or jobs that you want to delete by selecting them in the Print Monitor window. 2 Click the Delete button. You ...

17 Saving Jobs in Native Format Once a job has been printed, you may want to save the RIPed file so that you can reprint it without having to RIP the file again. Saving a file as Native format, with a .prt extension, allows you to save RIPed files for reprinting. 1 Select the job that you want to sa...

18 Settin g Job Properties Job Properties offer an additional level of control. You can access Job Properties by clicking on a job in the Print Monitor, and then selecting Job Properties from the File menu. Many of the settings in the Job Properties tabs are also contained in the Setup Properties di...

20 The Color Adjust tab The Color Adjust tab settings are identical to the settings on the Color Adjust tab of the Setup Properties dialog box. See “Color Adjust tab” on page 14.

21 Ad van ced Printin g Procedu res If your program is not listed, refer to a section on a similar program. Illustrator 7 ColorSync 2.x and Kodak Digital Science must be installed when using Illustrator to create CMYK files. 1 From the Roland COLORCHOICE Print Monitor click Setup>Setup Properties...

24 6 From the Page field select your paper size or choose Custom for a custom page size. If you choose Custom page size, enter the custom size in the height and width fields. 7 Select your printer’s resolution as the Target Output Resolution. If it is not available, select the next highest value. Cl...

27 Photoshop 5 1 From the Roland COLORCHOICE Print Monitor click Setup>Setup Properties. Then click the Print tab. 2 Make sure the Perform Color Correction checkbox has a check in it, correct profiles and rendering intent are set. 3 Click OK to close Setup Properties. 4 Go to Apple menu and selec...

29 selection to RGB color if the file is an RGB file. Also, you must uncheck PostScript Color Management. 13 Select Printer Specific Options from pop-up menu. If you want the file to be printed automatically, select Print in the After Sending option. If you want to verify the print mode and the prof...

31 of copies. 13 Select Printer Specific Options from pop-up menu. If you want the file to be printed automatically, select Print in the After Sending option. If you want to verify the print mode and the profile settings before printing the file, select Hold. Select Hold in the After Printing, if yo...

34 Co nto ur Cu tting and Spot Colo r Printing Using a ColorCAMM PRO you can print objects and then cut a contour line around them.Also you can print using a Spot Color ribbon. To use such features, you have to install and use special color libraries in your design application such as Illustrator or...