Roland JM-5 - Manual
Roland JM-5 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Portamento control (Controller number 84)
- Page 3 – Program Change; Channel Mode Messages; Reset All Controllers (Controller number 121)
- Page 4 – System Realtime Messages
- Page 5 – System Exclusive Messages; Universal Realtime System Exclusive Messages
- Page 6 – Global Parameter Control
- Page 7 – Scale/Octave Tuning Adjust; Channel Voice Messages; Note off
- Page 10 – GS reset; System Exclusive messages
- Page 11 – Patch common parameters
- Page 14 – Supplementary material; Decimal and Hexadecimal table
- Page 15 – Example of an Exclusive message checksum calculation; About the Tuning
- Page 16 – Common MFX A
- Page 17 – Common MFX B
- Page 18 – Common MFX C
- Page 19 – Part Output
- Page 20 – MIDI Implementation Chart
1
Model:
JM-5
Date:
July 2011
Version:
1.00
MIDI Implementation
1. Received data
■
Channel Voice Messages
●
Note off
●
Note on
• Not received when Rx.NOTE MESSAGE= OFF. (Initial value is ON)
●
Polyphonic Key Pressure
• The resulting effect is determined by System Exclusive messages. With
the initial settings, there will be no effect.
●
Control Change
• The value specified by a Control Change message will not be reset even
by a ProgramChange, etc.
❍
Bank Select (Controller number 0, 32)
• Bank Select processing is suspended until a program change is received.
❍
Modulation (Controller number 1)
• Not received when Rx.MODULATION= OFF (Initial value is ON).
• The resulting effect is determined by System Exclusive messages. With
the initial settings, this is Pitch Modulation Depth.
❍
Portamento Time (Controller number 5)
❍
Data Entry (Controller number 6, 38)
❍
Volume (Controller number 7)
• Volume messages are used to adjust the volume balance of each Part.
• Not recevied when “Volume” RX Event is off.
❍
Pan (Controller number 10)
• Not received when “PanPot” RX Event is Off
❍
Expression (Controller number 11)
• Not received when "Expression" RX Event is Off.
❍
Hold 1 (Controller number 64)
• Not received when “Hold” RX Event is Off.
❍
Portamento (Controller number 65)
❍
Sostenuto (Controller number 66)
• Not received when “Sostenuto” RX Event is Off.
Status
2nd byte
3rd byte
8nH
kkH
ccH
9nH
kkH
00H
n= MIDI channel number:
0H~FH (Ch.1~16)
kk= note number:
00H~7FH (0~127)
vv= note off velocity:
00H~7FH (0~127)
Status
2nd byte
3rd byte
9nH
kkH
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
kk= note number:
00H~7FH (0~127)
vv= note on velocity:
01H~7FH (1~127)
Status
2nd byte
3rd byte
AnH
kkH
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
kk= note number:
00H~7FH (0~127)
vv= key pressure:
00H~7FH (0~127)
Status
2nd byte
3rd byte
BnH
00H
mmH
BnH
20H
llH
n= MIDI channel number:
0H~FH (Ch.1~16)
mm= Bank number MSB:
00H~7FH
Initial value= 00H
ll= Bank number LSB:
00H~7FH
Status
2nd byte
3rd byte
BnH
01H
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Modulation depth:
00H~7FH (0~127)
Status
2nd byte
3rd byte
BnH
05H
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Portamento Time:
00H~7FH (0~127),
Initial value= 00H (0)
Status
2nd byte
3rd byte
BnH
06H
mmH
BnH
26H
llH
n= MIDI channel number:
0H~FH (Ch.1~16)
mm, ll= the value of the parameter specified by RPN/NRPN
mm= MSB, ll= LSB
Status
2nd byte
3rd byte
BnH
07H
vvH
n= MIDI channel number
0H~FH (Ch.1~16)
vv= Volume:
00H~7FH (0~127),
Initial value= 64H (100)
Status
2nd byte
3rd byte
BnH
0AH
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= pan:
00H~40H~7FH (Left~Center~Right),
Initial value= 40H (Center)
Status
2nd byte
3rd byte
BnH
0BH
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Expression:
00H~7FH (0~127), Initial value= 7FH (127)
Status
2nd byte
3rd byte
BnH
40H
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Control value:
00H~7FH (0~127)
Status
2nd byte
3rd byte
BnH
41H
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Control value:
00H~7FH (0~127) 0~63= OFF, 64~127=
ON
Status
2nd byte
3rd byte
BnH
42H
vvH
n= MIDI channel number:
0H~FH (Ch.1~16)
vv= Control value:
00H~7FH (0~127) 0~63= OFF, 64~127= ON
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
JM-5 MIDI Implementation 2 ❍ Soft (Controller number 67) • Not received when “Soft” RX Event is Off. ❍ Hold 2 (Controller number 69) • Not received when “Hold” RX Event is Off. ❍ Filter Resonance (Timbre/Harmonic Intensity) (Controller number 71) ❍ Release Time (Controller number 72) ❍ Attack time (...
JM-5 MIDI Implementation 3 ❍ RPN MSB/LSB (Controller number 101, 100) • Not received when "RPN" RX Event is Off.• The value specified by RPN will not be reset even by messages such as Program Change or Reset All Controller. **RPN**The RPN (Registered Parameter Number) messages are expanded c...
JM-5 MIDI Implementation 4 ● All Notes Off (Controller number 123) • When All Notes Off is received, all notes on the corresponding channel will be turned off. However, if Hold 1 or Sostenuto is ON, the sound will be continued until these are turned off. ● OMNI OFF (Controller number 124) • The same...
