Robinhood RPB3CL9SS/WH - User Manual
Robinhood RPB3CL9SS/WH Range Hood – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – continued; Contents of packaging:
- Page 5 – Installation
- Page 6 – •Remove both LED Bulbs from their sockets.; Recirculation mode
- Page 7 – Note
- Page 8 – Product approvals and ratings; responsible for their safety.; Product rating
- Page 9 – Terms and Conditions
Description:
ROBINHOOD POWERPACK RANGEHOOD
Model Numbers:
RPB3CL6SS/WH, RPB3CL9SS/WH
Product may vary slightly from the picture
Issue 3
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Pre-Installation - continued Contents of packaging: Typical equipment required: 1 x rangehood electric drill and screwdriver 1 x packet of fasteners tape measure and spirit level 2 x face plates step ladder 1 x Installation and Operating Instructions duct tape (if ducting) jig saw (if ducting) ladde...
Before drilling any holes check that the area behind the surface to be drilled is clear of any electrical cables, pipes etc. The ceiling must take a weight bearing of at least 40kgs weight . Whenever possible protect the Rangehood with a fabric sheet or similar. When installing the rangehood, the lo...
Installation • Mounting the Rangehood •Fit the ducting adaptor to the rangehood using the short screws supplied. •Provide an opening on the underside of the cupboard to suit models/ provide 490mm x 258mm for 600 model or 665mm x 258mm for 900 model. •Remove both LED Bulbs from their sockets. •Remove...
