Robinhood RPB3CL9SS/WH - Manuals

Pre-Installation - continued Contents of packaging: Typical equipment required: 1 x rangehood electric drill and screwdriver 1 x packet of fasteners tape measure and spirit level 2 x face plates step ladder 1 x Installation and Operating Instructions duct tape (if ducting) jig saw (if ducting) ladde...

Before drilling any holes check that the area behind the surface to be drilled is clear of any electrical cables, pipes etc. The ceiling must take a weight bearing of at least 40kgs weight . Whenever possible protect the Rangehood with a fabric sheet or similar. When installing the rangehood, the lo...

Installation • Mounting the Rangehood •Fit the ducting adaptor to the rangehood using the short screws supplied. •Provide an opening on the underside of the cupboard to suit models/ provide 490mm x 258mm for 600 model or 665mm x 258mm for 900 model. •Remove both LED Bulbs from their sockets. •Remove...