Robinhood RSA2CL6SS - User Manual
Robinhood RSA2CL6SS Range Hood – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – models should comply with this requirement in
- Page 4 – Installation; continued; Operating instructions; holes
- Page 5 – LED Light Assembly
- Page 6 – Product approvals and ratings; Product approval number; Important safety information; appliances burning gas or other fuels.
- Page 8 – Australia
1
Description:
ROBINHOOD SLIDEOUTS
Model
Numbers:
RSA2CL6SS
RSA2CL9SS
RSA2CL6SS model pictured
Issue: 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Pre-Installation - continued Ducting Options The method of ducting should be carefully considered before installing the rangehood. The guide below recommends the ducting components to use for all common ducting configurations - through the top of the home (for the roof and soffit) and through the ...
4 Installation continued * All dimensions shown above are in mm TO INSTALL To install the rangehood you will need to drill four 6mm holes into the base of the cabinet to correspond with the existing holes in the rangehood as shown in the drawing above. To allow the ducting vent and power cord to fit...
5 Cleaning and maintenance General Maintenance Switch off the rangehood before cleaning or maintenance. To prevent surface damage never use abrasive or oil based liquid cleaners. To clean the surfaces of the appliance, use mild detergent and warm water. In areas of high humidity and coastal environm...
