Robinhood RIE3CL9SS - Manuals

Pre-Installation - continued Contents of packaging: Typical equipment required: 1 x rangehood electric drill and screwdriver 1 x packet of fasteners tape measure and spirit level 2 x chimney pieces (upper and lower) step ladder 1 x support frames duct tape (if ducting) 1 x Installation and Operating...

Before drilling any holes check that the area behind the surface to be drilled is clear of any electrical cables, pipes etc. The ceiling must take a weight bearing of at least 40kgs weight . Whenever possible protect the Rangehood with a fabric sheet or similar. 1. Before commencement unpack the ran...

Control Panel Cleaning and maintenance Particular care must be taken with the aluminium filters which must be periodically cleaned (at least every two months). Remove the grease filters and wash them either by hand using hot soapy water or in the dishwasher using mild detergent. Note - some discolou...