Robinhood RIV3CL9G - Manuals

Pre-Installation - continued Contents of packaging: Typical equipment required: 1 x rangehood electric drill and screwdriver 1 x packet of fasteners tape measure and spirit level 2 x chimney pieces (upper and lower) step ladder 2 x support frames duct tape (if ducting) 1 x Installation and Operating...

Before drilling any holes check that the area behind the surface to be drilled is clear of any electrical cables, pipes etc. Fixing to a solid joist or 50mm deep truss is recommended. Whenever possible protect the hob top with cardboard or similar. 1. Before commencement unpack the canopy hood and c...

Control Panel Cleaning and maintenance Particular care must be taken with the aluminium filters which must be periodically cleaned (at least every two months). Remove the grease filters and wash them either by hand using hot soapy water or in the dishwasher using mild detergent. Note - some discolou...