Polar Cycling Computer - Manual
Polar Cycling Computer – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – E N G L I S H
- Page 3 – Speed Sensor Teaching; Select
- Page 4 – Seek sensor
- Page 5 – Technical Specification; Thermoplastic polymer
- Page 6 – Limited Polar International Guarantee
- Page 8 – Disclaimer
The Polar Speed Sensor W.I.N.D. is designed to
measure speed and distance when cycling. No
other use is intended or implied.
Please follow the pictures on the front cover.
Product Elements
1.
Polar Bike Mount and Cycling Computer
(picture 1 A)
2.
Polar Speed Sensor, rubber part and spoke
magnet (picture 1 B)
Installing the Polar Bike Mount and Cycling
Computer
You can install the bike mount and the cycling
computer on the left or right side of the
handlebar or on the stem.
1.
Place the rubber part on the handlebar or
stem and insert the bike mount on top of it
(picture 2).
2.
Pass the cable ties over the bike mount and
adjust them around the handlebar/stem.
Secure the bike mount firmly. Cut off any
excess cable tie ends (picture 2).
3.
Position the cycling computer on to the
bike mount. Turn the cycling computer
clockwise until you hear a click. You can
release the cycling computer by pressing it
down and simultaneously turning it counter
clockwise.
Installing the Polar Speed Sensor
To install the speed sensor and spoke magnet,
you will need cutters and a cross-head
screwdriver.
1.
It is recommended to install the speed
sensor on the front fork (as in picture 1) of
your bicycle. Do not install the speed
sensor on the seat stay if the (optional)
power sensor is mounted.
E N G L I S H
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2. Attach the rubber part to the speed sensor(picture 3). 3. Pass the cable ties over the speed sensorand rubber part (picture 4). Adjust thesensor to the front fork so that the POLARlogo faces outwards. Adjust the ties loosely.Do not tighten them fully yet. 4. Attach the magnet to a spoke at the sa...
Speed Sensor Teaching The cycling computer has to be coded to theSpeed Sensor i.e. taught to receive speed anddistance data. This enables exercising in agroup without interference from other sensors. The cycling computer and sensor that comewith the product set have already beensynchronized but teac...
Care and Maintenance Keep the speed sensor clean. Clean it with amild soap and water solution and rinse off withclean water. Dry it carefully with a soft towel.Never use alcohol or any abrasive material suchas steel wool or cleaning chemicals. Do notimmerse the speed sensor in water. Your safety is ...
