Plantronics W745A - Manual

After you install the headset battery, choose one of the three headsetwearing styles, over-the-ear, over-the-head or behind-the-head. Use the fitkit to assemble it and optimise the position of the microphone. Position the battery as shown on the headset and slide into position until the battery snap...

2 Choose the size and style of ear tip that fits most comfortably. Align the ear tip with the notchfacing the microphone as shown. Press on to attach. NOTE Ensure the large end of the ear tip points to the microphone. 3 To correctly position your headset, see Position your headset. When you wear the...

1 Hold the headband so it is aligned to receive the headset as shown and insert the headset intothe headband. 2 Rotate the headset up. The headband can be worn on the right or left side. 3 To optimise the position of the headset, push the headset in so the microphone is close to yourmouth. 1 Align t...

1 Align the charging cradle pins with the base and press firmly until the cradle rests evenly on thebase. 2 Plug one end of power supply into power jack on back of the base and other end into workingpower outlet. 3 Place the headset in the charging cradle. The headset charging LED flashes green when...

Choose a desk phone setup A, B or C and connect cables. A Desk phone (standard) USE • Connect one end of the telephone interface cable to the back of the base • Disconnect the handset coil cord from the base of the desk phone and re-connect it to the telephone interface cable junction box. • Finally...

1 While wearing headset, short press base desk phone button. NOTE If you don't have remote call control through a lifter (HL10) or cable (EHS), manually remove desk phone handset before each call. 2 If you do not hear a dial tone, open the side panel and adjust the middle configuration switch A- G u...

Your mobile phone can be paired to multiple headsets and hands-freedevices, but it can only be connected to one device at a time. The followingare instructions for pairing your mobile phone to the base. 1 Press down and hold Bluetooth pairing button (4 seconds) on Savi base until indicator LEDflashe...

1 Connect the USB cable. 2 Load the Plantronics software by visiting plantronics.com/us/support/software-downloads/ and click on the download button.For a list of compatible softphones, visit plantronics.com/us/support/software-downloads/ 1 While wearing your headset, short press the base computer b...

Now that you’ve assembled your headset, installed the software andconnected your phones, read this section to learn about the headsetfeatures, how to use the controls and more. 1 Volume/Mute buttonDecrease the volume Press the volume button down Increase the volume Press the volume button up Mute/un...

Low battery warning If you are on a call and the headset battery is critically low, you will hear a repeated single lowtone every 15 seconds indicating that the battery is low. You should recharge the headsetimmediately or swap the low battery for a fully-charged battery. If you are not on a call an...

For computer volume adjustments, use your softphone application controls or your computer’saudio control panel (see below). Mobile phone volume can be adjusted on the mobile phone. NOTE You can quickly access your system’s control panel by using the link in the Plantronics Control Panel on the Prefe...

This section describes the base, its buttons and their functions. Basics When you press on a base button, you are opening a phone line/audio channel. Depending onthe circumstances, you won’t necessarily hear a dial tone until you’ve dialled from your phone.The base buttons allow you to switch to a d...

Base subscription button LED Base subscription LED Base status Flashes green and red Primary headset subscription mode Solid green Primary headset subscribed to base Solid yellow Active conference call with guest headsets Solid red No headset subscribed Flashes green 3X, the yellow 2X Security level...

Answer a call The easiest way to answer an incoming call from the desk phone, mobile phone or computer isto press the headset call button when you hear an incoming call. Alternatively, you can answer an incoming call by pressing the base button for the line that isringing. NOTE If you don't have rem...

base. The first headset is the primary user’s headset and the number inside the next headset isthe number of guest headsets subscribed to the base. The following example shows one primaryheadset with two guest headsets conferenced in. Your Savi 700 Series headset system (v28 or later) supports DECT ...

Plantronics Hub resides on your computer system and allows you tocustomize your settings and get visible status of your Plantronics audiodevice on your desktop. Plantronics Hub provides users with an easy wayto change device and software settings and install software and firmwareupdates. This sectio...

Feature Settings Default General (software) Ring location Headset, Headset/PC Headset only Maintain headset to PCradio link Active only during call/Always active Active only during call Software log leveldetail Low/Med/High/Verbose Low Metrics collection tohelp improve hub Off/On On General (Savi 70...

Feature Settings Default Desk phone ringtone Tone 1/Tone 2/Tone 3Default/Low/Off Tone 1Default volume Mobile phone ringtone Standard/Low/OffTone 1/Tone 2/Tone 3Default/Low/Off Tone 2Default volume PC ringtone Tone 1/Tone 2/Tone 3Default/Low/Off Tone 3Default volume System tone Default/Low/Off Defaul...

Over the air subscriptionThis feature allows a headset to be subscribed to the base without physically docking theheadset. It is required when conferencing multiple models of Plantronics headsets. For more on subscription, see Base subscription buttons . For more on headset guest conferencing, see C...

Anti-startle (G616)G616 Acoustic Limiting provides additional hearing protection against acoustic shock. WhenG616 Acoustic Limiting is SELECTED, the system provides additional acoustic shock protection.Sound levels are limited to 102 dBA as recommended in the G616:2006 guideline issued by theAustral...

My headset is unstable. When you wear the headset, the microphone should rest as closeto your cheek as possible without touching. The microphone canbe adjusted inward by the pivoting earpiece to optimise theposition of the headset. See Position your headset . Talk time performance issignificantly de...

People I talk to can hear a buzz inthe background. Move the base further away from your phone. See Position your base . If the base power supply is plugged into a power strip, plug itinto the wall directly. The handset lifter is installed, butdoes not lift the handset. Ensure the handset lifter powe...