Pioneer SL400 - User Manual

III. Getting to know the underwater housing 1 – Lens 2 – Battery indicator LED - Blinks when charging - Solid when fully charged 3 – LCD Display 4 – Power ON indicator LED 5 – Power/Mode/Back 1-step button 6 – Shutter/OK button 7 – Battery pull tab 8 – Li-ion battery 9 – Serial # (inner camera) 10 –...

IV. Getting started 1. Open the underwater housing. Push and hold release button and rotate cam lock counter-clockwise. 2. Insert two alkaline or NiMH AAA batteries. 3. Download SeaLife SportDiver app from Apple App Store. 4. Fully charge iPhone and turn ON Airplane mode and Do Not Disturb. Turn OFF...

12. Hold vacuum pump against vacuum check port and pump until the on- screen gauge reaches the target vacuum pressure. 13. The underwater housing will analyze the internal vacuum pressure for 3.5 minutes. After the leak analysis is complete, the housing is ready for underwater use. V. Using the SeaL...

VI. GREAT UNDERWATER PHOTOS AND VIDEOS MADE EASY Clear water visibility Clear water is essential for good results. Tiny particles floating in the water cause low visibility and poor image quality. Avoid stirring up the sea floor with your fins. Limit your shooting distance to 1/10 of the water visib...

2) When NOT using an underwater photo-video light, set the camera’s White Balance setting to Underwater Deep or Underwater Shallow depending on your depth. If you are using a photo-video light, set the White Balance to Auto. Visit the SeaLife website for updates and how-to tutorials Any updates to t...

VII. TROUBLESHOOTING GUIDE Refer to the symptoms and solutions listed below before sending the camera for repairs. Any updates may be found on the SeaLife website at www.sealife-cameras.com. Look for “Techncial Updates” section. If repair service is still needed, please contact your local authorized...

VIII. KEY SPECIFICATIONS For comprehensive product specifications, visit www.sealife-cameras.com Battery: Battery life: Waterproof: Individually depth tested to 130’ (60 m) Operating temp: 0°F to 120°F (-18°C to 50°C) Storage temp: -20°F to +140°F(-29°C to +60°C) Tripod mount: Standard ¼-20 tripod t...

IX. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: ...

X. IC Statement (RSS-Gen section 7.1.3) Canada, Industry Canada (IC) Notices This device complies with Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including ...

XI. Limited Warranty Please register your SeaLife product online at: www.sealife- cameras.com/warranty . Manufacturer warrants to the original purchaser of new and unused product in its original packaging, for a period of one (1) year from the date of purchase, that the product is free from defects ...