Pioneer PWM-T210 - Manual - manualsarea.com

Page 2 - TABLE OF CONTENTS

PWM-T210 TABLE OF CONTENTS Warning Statements 3 Parts List 4 Installation Tools 4 Locating the Center of the Display 5 Mounting Bracket Positioning 5 Securing the Mounting Brackets 6 Marking the Wall 7 Marking the Bottom Mounting Points 7 Securing the Lower Wall Plate 8 Securing the Upper Wall Plate...

Page 4 - Parts List; NOTE; Installation Tools; Phillips Head Screw Driver Soft Material/ Blanket

PWM-T210 Page 4 Installation Instructions Parts List NOTE : This mount is shipped with all installation hardware and components. Make sure that noneof these parts are missing and/ or damaged before beginning installation. If there are partsmissing and/or damaged, please stop and contact Premier Moun...

Page 5 - Locating the Center of the Display; WARNING; : INVERT THE FLAT PANEL PLACE IT ON A SOFT, FLAT SURFACE TO PREVENT; Figure 1; Once the flat panel is inverted, use a; Mounting Bracket Positioning; Lay the left and right mounting brackets; Figure 3

PWM-T210 Installation Instructions Page 5 Locating the Center of the Display CAUTION: Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could result in serious personal injury and possible damage to the flat panel. ...

Page 6 - Figure 6; Match the center of viewing guide; Figure 4; Securing the Mounting Brackets

PWM-T210 Page 6 Installation Instructions Figure 6 L C 4. Match the center of viewing guide with the center line you marked in step 1 (Figure 4). 5. The mounting brackets are designed with a center of viewing guide on theside of them (Figure 5). Figure 4 Figure 5 DisplayBottom Align theMountingBrack...

Page 7 - Marking the Wall; Figure 8; Marking the Bottom Mounting Points; Figure 9

PWM-T210 Installation Instructions Page 7 1. Align the center viewing port from the carton template to the wall. Match the center of viewing port to the center of viewing height desired (Figure 7). 2. Mark a line on the bottom of thecarton template (Figure 8). Marking the Wall CENTER OF V IEWI N G H...

Page 8 - Securing the Lower Wall Plate; Securing the Upper Wall Plate; CAUTION; : CHECK THE MOUNT FOR PROPER

PWM-T210 Page 8 Installation Instructions Securing the Lower Wall Plate 1. Level and secure the plate to the wall with the reference arrow facing up to theceiling (Figure 11). 2. Secure the plate using the provided lagbolts and washers. Level Wall Plate Figure 11 3. When the bottom wall plate is pro...

Page 9 - Mounting the Display; : AT LEAST (2) QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR; Do not over tighten the M6 screws to the rods.

PWM-T210 Installation Instructions Page 9 Mounting the Display WARNING : AT LEAST (2) QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR INSTALLATION OF THIS PRODUCT. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY AND POSSIBLE DAMAGE TO THE FLAT PANEL. 1. Raise the flat panel with the mounting bracke...

Page 10 - Securing the Display

PWM-T210 Page 10 Installation Instructions Securing the Display 1. Tilt the flat panel and secure the two (2) M6 x 12 mm safety knobs to each of the mounting brackets (Figure 17). NOTE : To remove the display from the wall simply extend the display to its maximum tilt range,remove the two (2) M6 x 1...

Page 11 - Technical Specifications; Limited Lifetime Warranty; Contact Premier Mounts

PWM-T210 Installation Instructions Page 11 Technical Specifications Dimensions shown in (mm)/inches. Warranty Limited Lifetime Warranty All Premier Mounts products carry a limited lifetime warranty from ship date against defects in materials andworkmanship. Premier Mounts is not liable for improper ...

Pioneer PWM-T210 - Manual

Table of Contents:

Summary

Other Pioneer Models