Page 2 - After you have finished reading the instructions, keep this man-; Contents
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operateyour model properly. After you have finished reading the instructions, keep this man- ual in a safe place for future reference. Before You Start Information to User 5 For Canadi...
Page 3 - English
– Recalling equalizer curves 23 – Adjusting equalizer curves 24 – Fine-adjusting equalizer curve 24 Adjusting loudness 25 Using subwoofer output 25 – Adjusting subwoofer settings 25 Using the high pass filter 26 Boosting the bass 26 Adjusting source levels 26 Initial Settings Adjusting initial setti...
Page 5 - Information to User; For Canadian model; WARNING; CAUTION; About WMA
Information to User Alteration or modifications carried out withoutappropriate authorization may invalidate theuser ’ s right to operate the equipment. For Canadian model This Class B digital apparatus complies withCanadian ICES-003. About this unit The tuner frequencies on this unit are allo-cated ...
Page 7 - Visit our website; Visit us at the following site:; In case of trouble; The front panel can be detached to deter theft.; Removing the front panel; Press DETACH to release the front; Attaching the front panel; Slide the front panel to the left until it
After-sales service forPioneer products Please contact the dealer or distributor fromwhere you purchased this unit for after-salesservice (including warranty conditions) or anyother information. In case the necessary infor-mation is not available, please contact thecompanies listed below:Please do n...
Page 8 - About the demo mode; This unit features the feature demo mode.; Feature demo mode; Installing the battery; Using the remote control
2 Press the right side of the front panel until it is firmly seated. # If you can ’ t attach the front panel to the head unit successfully, try again. Front panel may bedamaged if you attach the front panel forcedly. About the demo mode This unit features the feature demo mode. Important The red lea...
Page 9 - Head unit; LIST button; Operating this unit
What ’ s What Head unit 1 LIST button Press to display the disc title list, track titlelist, folder list, file list or preset channel listdepending on the source. 2 SOURCE/OFF button This unit is turned on by selecting a source.Press to cycle through all the availablesources. 3 DISP/BACK/SCRL button...
Page 10 - Remote control; Press to increase or decrease the volume.; Display indication; Appears when operating list function.
While using iPod, press this button to shuf-fle all tracks.Press and hold to turn iPod remote functionon or off while using an iPod connectedUSB connector of this unit.If using the iPod with an interface adapter(CD-IB100 N ), press to switch the shuffle function. d BAND/ESC button Press to select am...
Page 11 - Basic Operations; Turning the unit on; Selecting a source
Appears when album search refinement oniPod browsing function is operated. 8 (song) indicator Appears when the track (song) name is dis-played on the main display section.Appears when song search refinement oniPod browsing function is operated. 9 (subwoofer) indicator Appears when subwoofer is on. a...
Page 12 - Adjusting the volume; Use VOLUME to adjust the sound; Tuner; Select a band; Seek tuning
! Charging the portable audio player usingcar ’ s DC power source while connecting it to AUX input may generate noise. In this case,stop charging. ! External unit refers to a Pioneer product (suchas ones available in the future) that, althoughincompatible as a source, enables control ofbasic functio...
Page 13 - Tuning in strong signals; The
Introduction of advancedoperations 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option. Press to se-lect. 3 Turn MULTI-CONTROL to select the function.BSM (best stations memory) — LOCAL (local seek tuning) Notes ! You can also select ...
Page 14 - For title entered CD
Built-in CD Player Basic Operations The built-in CD player can play back audio CD(CD-DA) and compressed audio (WMA/MP3/AAC/WAV) recorded on CD-ROM. (Refer topage 54 for files that can be played back.)Read the precautions for discs and player onpage 51. % Insert a disc into the disc loading slot. Pla...
Page 15 - For WAV discs; Press LIST to switch to the track title list
For WMA/MP3/AAC discs Play time — folder name — file name — track title — artist name — album title — comment — bit rate For WAV discs Play time — folder name — file name — sam- pling frequency Notes ! You can scroll to the left of the title by pressingand holding DISP . ! Audio CD that contains cer...
Page 16 - Selecting a repeat play range; Playing tracks in random order; Tracks play in a random order.; Scanning folders and tracks; The first 10 seconds of each track is played.; Pausing playback; Playback of the current track pauses.
Introduction of advancedoperations 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option. Press to se-lect. 3 Turn MULTI-CONTROL to select the function.REPEAT (repeat play) — RANDOM (random play) — SCAN (scan play) — PAUSE (pause) — SO...
Page 17 - Using Sound Retriever; Using disc title functions; Entering disc titles
Note You can also turn this function on or off in themenu that appears by using MULTI-CONTROL . Using Sound Retriever Sound Retriever function automatically en-hances compressed audio and restores richsound. % Press S.Rtrv repeatedly to select the de- sired setting.S. RTRV OFF (off) — S. RTRV 1 — S....
Page 18 - Selecting files from the
Playing songs on USB portableaudio player/USB memory For details about the supported device, refer toPortable audio player compatibility on page 6. Basic Operations % Select a folder Push MULTI-CONTROL up or down. % Fast forward or reverse Push and hold MULTI-CONTROL left or right for about one seco...
Page 19 - Function and operation; and
3 Turn MULTI-CONTROL to select the function.REPEAT (repeat play) — RANDOM (random play) — SCAN (scan play) — PAUSE (pause) — SOUND RETRIEVER (advanced sound retrie- ver) Function and operation REPEAT , RANDOM , SCAN , PAUSE and SOUND RETRIEVER operations are basically the same as that of the built-i...
Page 20 - Playing songs on iPod; compatibility on page 6.; Browsing for a song
Playing songs on iPod For details about the supported iPod, refer toiPod ® compatibility on page 6. Basic Operations % Fast forward or reverse Push and hold MULTI-CONTROL left or right for about one second and release. % Select a track (chapter) Push MULTI-CONTROL left or right. Notes ! When using a...
Page 21 - vanced sound retriever); Turn to change the setting.
Notes ! You can scroll the text information to the leftby pressing and holding DISP . ! When Ever Scroll is set to ON at the initial set-ting, text information scrolls continuously inthe display. Refer to Switching the Ever Scroll on page 28. Introduction of advancedoperations 1 Press MULTI-CONTROL ...
Page 22 - Changing audiobook speed
! ALBUMS – Play back songs from a ran- domly selected album in order. ! OFF – Cancel random play. Playing all songs in a randomorder (shuffle all) % Press iPod to turn shuffle all on. All songs on the iPod play randomly. # To turn shuffle all off, set SHUFFLE in the FUNCTION menu to off. Note You ca...
Page 23 - Using balance adjustment; Using the equalizer; Recalling equalizer curves; Audio Adjustments
Introduction of audioadjustments 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to se-lect. 3 Turn MULTI-CONTROL to select the audio function. Turn MULTI-CONTROL to switch between the audio functions in the following order. ...
Page 24 - Adjusting equalizer curves; Fine-adjusting equalizer curve; Center frequency
VOCAL Vocal CUSTOM Custom FLAT Flat SUPER BASS Super bass ! CUSTOM is an adjusted equalizer curve that you create. If you make adjustments toan equalizer curve, the equalizer curve set-ting is memorized in CUSTOM . ! When FLAT is selected, no supplement or correction is made to the sound. This isuse...
Page 25 - Adjusting loudness; Adjusting subwoofer settings; Cut off frequency
4 Turn MULTI-CONTROL to adjust the se- lected segement. Band LOW (low) — MID (mid) — HI (high) Frequency Low: 40HZ — 80HZ — 100HZ — 160HZ Mid: 200HZ — 500HZ — 1KHZ — 2KHZ High: 3KHZ — 8KHZ — 10KHZ — 12KHZ Q factor 2N — 1N — 1W — 2W # You can also perform the same operations by pushing MULTI-CONTROL ...
Page 26 - Using the high pass filter; Adjusting source levels
4 Turn MULTI-CONTROL to adjust the se- lected segement. Cut off frequency 50HZ — 63HZ — 80HZ — 100HZ — 125HZ Level +6 to – 24 is displayed as the level is increased or decreased. # You can also perform the same operations by pushing MULTI-CONTROL up or down. Note You can also switch to this setting ...
Page 27 - Using the AUX source
Adjusting initial settings 1 Press SOURCE and hold until the unit turns off. 2 Press MULTI-CONTROL and hold until CLOCK SET appears in the display. 3 Turn MULTI-CONTROL to select one of the initial settings.CLOCK SET (clock) — WARNING TONE (warn- ing tone) — AUX1 (auxiliary input 1) — AUX2 (auxiliar...
Page 28 - Switching the feature demo; Switching the Ever Scroll
2 Press MULTI-CONTROL to turn dimmer on. # To turn dimmer off, press MULTI-CONTROL again. Setting the rear output andsubwoofer controller This unit ’ s rear output (rear speaker leads out- put) can be used for full-range speaker ( FULL ) or subwoofer ( SUB W ) connection. If you switch the rear outp...
Page 29 - can change this in this function.; PIN code can be stored in memory.; Initial Settings
1 Use MULTI-CONTROL to select BT AUDIO. 2 Press MULTI-CONTROL to turn the BT AUDIO source on. # To turn the BT AUDIO source off, press MULTI-CONTROL again. Entering PIN code forBluetooth wireless connection To connect your cellular phone to this unit viaBluetooth wireless technology, you need toente...
Page 30 - About; What; Selecting AUX as the source; Setting the AUX title; tering disc titles; Other Functions
Using the AUX source Up to two auxiliary devices such as VCR orportable devices (sold separately) can be con-nected to this unit. When connected, auxiliarydevices are automatically read as AUX sourcesand assigned to AUX1 or AUX2 . The relation- ship between AUX1 and AUX2 sources is ex- plained below...
Page 31 - Using the external unit; Basic operation; s owner; Advanced operations
Using the external unit External unit refers to a Pioneer product (suchas ones available in the future) that, althoughincompatible as a source, enables control ofbasic functions with this unit. Two externalunits can be controlled with this unit. Whentwo external units are connected, the externalunit...
Page 32 - Displaying text information on iPod; Available accessories
Playing songs on iPod Basic operation You can use this unit to control an interfaceadapter for iPod, which is sold separately. % Fast forward or reverse Push and hold MULTI-CONTROL left or right for about one second and release. % Select a track Push MULTI-CONTROL left or right. Notes ! Read the pre...
Page 33 - Press RDM repeatedly to select the de-; Bluetooth Audio; Fast forward or reverse; Press MULTI-CONTROL to display the
! If you do not operate functions within about30 seconds, the display automatically returnsto the ordinary display. Playing songs in a randomorder (shuffle) % Press RDM repeatedly to select the de- sired setting. ! SONGS – Play back songs in the selected list in random order. ! ALBUMS – Play back so...
Page 34 - is displayed. This unit is; Stopping playback; is displayed. The Bluetooth
2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option. Press to se-lect. 3 Turn MULTI-CONTROL to select the function.CONNECTION OPEN (connection open) — DISCONNECT AUDIO (disconnect audio) — PLAY (Play) — STOP (Stop) — PAUSE (pause) — DEVICE INFO (device information) PAUSE is the sa...
Page 35 - Bluetooth Telephone; Setting up for hands-free phoning; Connecting a cellular phone
Displaying BD (BluetoothDevice) address 1 Use MULTI-CONTROL to select DEVICE INFO in the function menu. 2 Press MULTI-CONTROL to display the setting mode. 3 Use MULTI-CONTROL to select the de- sired setting. Turn to change the setting. DEVICE NAME (Device name) — BD ADDRESS (BD (Bluetooth Device) ad...
Page 36 - Making a phone call; Voice recognition; Taking a phone call; Answering or rejecting an incoming call; Operating a call waiting; If not connected yet
Making a phone call Voice recognition 1 Press BAND/ESC and hold until VOICE DIAL appears in the display.VOICE DIAL appears in the display. When VOICE DIAL ON is displayed, voice recogni- tion function is now ready. # If your cellular phone does not feature voice recognition function, NO VOICE DIAL a...
Page 37 - Searching for available cellular phones; flashes and the unit is
! DISCONNECT PHONE (disconnect phone) ! SET PHONE (registering phone) ! CLEAR MEMORY (clear memory) ! NUMBER DIAL (call by entering number) If connected but not registered yet The following functions cannot be operated. ! SEARCH PHONE (search and connect) ! CONNECTION OPEN (connection open) ! CONNEC...
Page 38 - Disconnecting a cellular phone; After disconnection is completed,; When registration is completed,; Deleting a registered phone; The phone being deleted is now on standby.
Disconnecting a cellular phone 1 Use MULTI-CONTROL to select DISCONNECT PHONE in the function menu. Device name of the connected phone appearsin the display. 2 Press MULTI-CONTROL to disconnect a cellular phone from this unit. After disconnection is completed, DISCONNECTED is displayed. Registering ...
Page 39 - Using the Phone Book; Transferring entries to the Phone Book
# You can also perform the same operations by pushing MULTI-CONTROL up or down. # If the assignment is empty, NO DATA is dis- played and operation is not possible. 4 Press MULTI-CONTROL to connect the selected cellular phone. While connecting, CONNECTING is displayed. After the connection is complet...
Page 40 - Using the Call History; Phone book; Call confirmation appears.; Clearing memory; Clearing memory is now on standby.
Using the Call History Important Be sure to park your vehicle and apply the park-ing brake when performing this operation. The 12 most recent calls made (dialled), re-ceived and missed, are stored in the Call His-tory. You can browse the Call History and callnumbers from it. 1 Press LIST to display ...
Page 41 - the data on the selected item is cleared,; XM tuner; s operation manuals. This section; Preset screen is displayed.
6 Press MULTI-CONTROL to clear the memory. While clearing, CLEARING is displayed. After the data on the selected item is cleared, CLEARED is displayed. Setting automatic rejecting 1 Use MULTI-CONTROL to select REFUSE CALLS in the function menu. 2 Press MULTI-CONTROL to turn auto- matic call rejectio...
Page 42 - Switching the XM channel select mode; Displaying the Radio ID; Channel number select setting; SIRIUS Satellite Radio tuner; Listening to SIRIUS Satellite Radio
2 Use MULTI-CONTROL to store the se- lected station in memory. Turn to change the preset number. Press andhold to store.The XM preset number you have selected willflash and then remain lit. The selected stationhas been stored in memory. 3 Use MULTI-CONTROL to select the de- sired station. Turn to ch...
Page 43 - Switching the SIRIUS display
% Select a SIRIUS band. Band can be selected from SR-1 , SR-2 or SR-3 . % Select a channel. Push MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel num-ber continuously. # You can also perform tuning from a desired channel category. ...
Page 44 - Selecting a channel in the channel; Using the Game Alert function; Selecting teams for Game Alert; Switching the Game Alert on or off
Selecting the SIRIUS channelselect mode You have two methods for selecting a channel:by number and by category. When selectingby number, channels in any category can beselected. Select by category to narrow yoursearch down to only channels in a particularcategory. % Press SAT MODE repeatedly to sele...
Page 45 - Displaying game information; Using CD TEXT functions; Displaying text information on disc
! If you do not operate the function withinabout 10 seconds, the display is automati-cally returned. Displaying game information If games of your selected teams are currentlyplaying, you can display information of thegames and tune to the broadcast channel.You can display information of the gameswhi...
Page 47 - Using ITS playlists; Creating a playlist with ITS programming; Playback from your ITS playlist
Using ITS playlists ITS (instant track selection) lets you make aplaylist of favorite tracks from the multi-CDplayer magazine. After you have added your fa-vorite tracks to the playlist, you can turn on ITSplay and play just those selections.You can use ITS to enter and play back up to99 tracks per ...
Page 48 - Erasing a CD from your ITS playlist; Displaying disc titles; Selecting discs from the disc title list; Turn to change the disc title. Press to play.; TV tuner; Press
Erasing a CD from your ITS playlist You can delete all tracks of a CD from your ITSplaylist if ITS play is off. 1 Play the CD that you want to delete. 2 Use MULTI-CONTROL to select ITS MEMORY in the function menu. 3 Press MULTI-CONTROL to display the setting mode. 4 Press MULTI-CONTROL to select DEL...
Page 50 - Error messages
Error messages When you contact your dealer or your nearestPioneer Service Center, be sure to have theerror message recorded. Built-in CD Player Message Cause Action ERROR-11, 12,17, 30 Dirty disc Clean disc. ERROR-11, 12,17, 30 Scratched disc Replace disc. ERROR-10, 11,12, 15, 17, 30,A0 Electrical ...
Page 51 - Store discs in their cases when not in use.
iPod Message Cause Action ERROR-19 Communicationfailure Disconnect thecable from iPod.Once iPod mainmenu is displayed,connect the cableagain.Reset the iPod. iPod failure Disconnect thecable from iPod.Once iPod mainmenu is displayed,connect the cableagain.Reset the iPod. N/A USB Old version ofiPod Up...
Page 52 - Dual Discs; WMA
Dual Discs ! Dual Discs are two-sided discs that have arecordable CD for audio on one side and arecordable DVD for video on the other. ! Since the CD side of Dual Discs is not phy-sically compatible with the general CDstandard, it may not be possible to play theCD side with this unit. ! Frequent loa...
Page 53 - File extensions must be used properly.; to
USB audio player/USB memory ! Do not leave the USB portable audioplayer/USB memory in direct sunlight forextended amounts of time. Extended expo-sure to direct sunlight can result in USBportable audio player/USB memory mal-function due to the resulting high tempera-ture. ! Do not leave the USB porta...
Page 54 - About handling the iPod; For details, refer to the iPod; About iPod settings; : Compressed audio file
iPod About handling the iPod ! Do not leave the iPod in direct sunlight forextended amounts of time. Extended expo-sure to direct sunlight can result in iPodmalfunction due to the resulting high tem-perature. ! Do not leave the iPod in a high tempera-ture. ! Connect directly the dock connector cable...
Page 55 - Specifications
Specifications General Power source ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... Negative typeMax. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ..................... 1...
Page 56 - Afin d; Table des matières
Nous vous remercions d ’ avoir acheté cet appareil Pioneer. Afin d ’ utiliser votre appareil correctement, veuillez lire ce mode d ’ emploi entière- ment. Après avoir lu ce mode d ’ emploi, conser vez-le dans un endroit sûr pour pouvoir vous y référer ultérieurement. Avant de commencer Pour le modèl...
Page 57 - Français
Utilisation de l ’ égaliseur 82 – Rappel d ’ une courbe d ’ égalisation 82 – Réglage des courbes d ’ égalisation 82 – Réglage fin de la courbed ’ égalisation 83 Réglage de la correction physiologique 83 Utilisation de la sortie haut-parleur d ’ extrêmes graves 83 – Réglages du haut-parleur d ’ extrê...
Page 59 - PRÉCAUTION; Quelques mots sur WMA
Pour le modèle canadien Cet appareil numérique de la classe B estconforme à la norme NMB-003 du Canada. Quelques mots sur cet appareil Les fréquences du syntoniseur de cet appareilsont attribuées pour une utilisation en Amé-rique du Nord. Son utilisation dans d ’ autres régions peut se traduire par ...
Page 61 - Mise en ser vice ou hors ser vice; Retrait de la face avant; Appuyez sur DETACH pour libérer la; Pose de la face avant; Faites glisser la face avant vers la gau-
ÉTATS-UNIS Pioneer Electronics (USA) Inc.CUSTOMER SUPPORT DIVISIONP.O. Box 1760Long Beach, CA 90801-1760800-421-1404 CANADA Pioneer Électroniques du Canada, Inc.Département de service aux consommateurs300 Allstate ParkwayMarkham, Ontario L3R 0P21-877-283-5901905-479-4411 Pour connaître les condition...
Page 62 - Mode de démonstration des fonctions; Installation de la pile; ATTENTION
2 Appuyez sur le côté droit de la face avant jusqu ’ à ce qu ’ elle soit bien en place. # Si vous ne pouvez pas monter la face avant sur l ’ appareil central, réessayez. N ’ exercez au- cune force excessive sur la face avant, cela pour-rait l ’ endommager. Quelques mots sur le modede démonstration C...
Page 63 - Utilisation de la télécommande; appareil à télécommander.
Utilisation de la télécommande Pointez la télécommande dans la direction dela face avant de l ’ appareil à télécommander. ! La télécommande peut ne pas fonctionnercorrectement à la lumière directe du soleil. Important ! Ne laissez pas la télécommande exposée àdes températures élevées ou à la lumière...
Page 64 - Appareil central; Touche LIST; Utilisation de l
Description de l ’ appareil Appareil central 1 Touche LIST Appuyez pour afficher la liste des titres desdisques, la liste des titres des plages, la listedes dossiers, la liste des fichiers ou la listedes canaux présélectionnés selon la source. 2 Touche SOURCE/OFF Cet appareil est mis en service en s...
Page 65 - Télécommande
9 Jack d ’ entrée AUX (jack stéréo 3,5 mm) Utilisez ce jack pour connecter un appareilauxiliaire. a Touche DETACH Appuyez sur cette touche pour retirer laface avant de l ’ appareil central. b Touche RPT/LOCAL Appuyez sur cette touche pour changer l ’ é- tendue de répétition lors de l ’ utilisation d...
Page 66 - Indications affichées
Appuyez sur cette touche pour contrôler lesfonctions lorsque vous utilisez le menu. Indications affichées 1 Section d ’ affichage principale Affiche la gamme, la fréquence, le temps delecture écoulé et d ’ autres paramètres. ! SyntoniseurLa gamme et la fréquence de réceptionsont affichées. ! Lecteur...
Page 67 - Opérations de base; Mise en service, mise hors service; Mise en service de l; Choix d; appareil; Réglage du volume
Opérations de base Mise en service, mise hors service Mise en service de l ’ appareil % Appuyez sur SOURCE pour mettre en service l ’ appareil. Mise hors tension de l ’ appareil % Maintenez la pression sur OFF jusqu ’ à ce que l ’ appareil soit mis hors tension. Choix d ’ une source Vous pouvez séle...
Page 68 - Syntoniseur
Syntoniseur Opérations de base % Sélection d ’ une bande Appuyez sur BAND/ESC . # La gamme peut être sélectionnée parmi FM1 , FM2 , FM3 ou AM . % Accord manuel (pas par pas) Poussez MULTI-CONTROL vers la gauche ou vers la droite. % Accord automatique Poussez MULTI-CONTROL vers la gauche ou vers la d...
Page 69 - Accord sur les signaux puissants; Lecteur de CD intégré
Mise en mémoire desfréquences les plus puissantes La fonction BSM (Mémoire des meilleures sta-tions) vous permet d ’ enregistrer automatique- ment les six fréquences d ’ émission les plus puissantes. 1 Utilisez MULTI-CONTROL pour sélec- tionner BSM dans le menu des fonctions. 2 Appuyez sur MULTI-CON...
Page 70 - Affichage d; Appuyez sur DISP pour choisir l
# Lors de la lecture d ’ un disque d ’ audio compressé, aucun son n ’ est émis pendant l ’ a- vance ou le retour rapide. % Revenir au dossier racine Appuyez sur BAND/ESC de façon prolongée. # Si le dossier 01 (ROOT) ne contient pas de fi- chier, la lecture commence au dossier 02. % Basculer entre le...
Page 71 - choisir une pour la lire.; en choisir un pour le lire.
! Lors de la lecture de fichiers WMA enregistrésen VBR (débit binaire variable), la valeur dudébit binaire moyen est affichée. ! Lors de la lecture de fichiers MP3 enregistrésen mode VBR (débit binaire variable), VBR est affiché au lieu de la valeur du débit binaire. ! La fréquence d ’ échantillonna...
Page 72 - Sélection d
Introduction aux opérationsavancées 1 Appuyez sur MULTI-CONTROL pour affi- cher le menu principal. 2 Utilisez MULTI-CONTROL pour choisir FUNCTION. Tournez pour changer l ’ option de menu. Ap- puyez pour sélectionner. 3 Tourner MULTI-CONTROL pour sélec- tionner la fonction.REPEAT (répétition de la le...
Page 73 - Pause de la lecture; Utilisation du Sound Retriever; audio compressé et restaure un; Saisie des titres de disque; à 48 titres de CD dans
2 Appuyez sur MULTI-CONTROL pour ac- tiver la lecture du contenu du disque. Les 10 premières secondes de chaque plagesont lues. 3 Quand vous trouvez la plage désirée appuyez sur MULTI-CONTROL pour arrêterla lecture du contenu du disque. # Si les conditions de lecture se sont affichées d ’ elles-même...
Page 74 - Pour des détails sur l
! Si vous connectez à l ’ appareil un lecteur de CD à chargeur qui ne supporte pas la saisiede titres, vous ne pouvez pas utiliser l ’ appareil pour entrer des titres. Lecture de plages musicalessur le lecteur audio portableUSB/la mémoire USB Pour des détails sur l ’ appareil supporté, repor- tez-vo...
Page 75 - un fichier audio; Pour les disques WAV; Fonction et utilisation
! Si un lecteur audio portable USB/une mé-moire USB est connecté(e) à cet appareil, lasource est automatiquement changée enUSB. Si vous n ’ utilisez pas l ’ appareil USB, dé- connectez-le de cet appareil. Avec certains ap-pareils USB, mettre le contact alors quel ’ appareil USB est connecté à cet ap...
Page 77 - Recherche d
Lecture de plagesmusicales sur l ’ iPod Pour des détails sur l ’ iPod supporté, reportez- vous à la page 59, Compatibilité iPod ® . Opérations de base % Avance ou retour rapide Poussez MULTI-CONTROL vers la gauche ou vers la droite et maintenez la pression pendantenviron une seconde puis relâchez. %...
Page 79 - albums de l; Maintenez la pression sur LIST pour; Cette fonction n
! La fonction REMOTE (contrôle à distance de l ’ iPod) n ’ est disponible que pour la fonction iPod nano (seconde génération). ! Lorsque REMOTE est activé, seules les fonc- tions REMOTE et SOUND RETRIEVER sont disponibles. Lecture des plages musicalesdans un ordre aléatoire (shuffle) 1 Utilisez MULT...
Page 80 - Modification de la vitesse d; Pendant l
1 Maintenez la pression sur iPod pour mettre la fonction de contrôle à distancede l ’ iPod en service. # Pour mettre cette fonction hors service, ap- puyez à nouveau de façon prolongée sur iPod . # Lorsque vous utilisez cette fonction, le temps de lecture et les titres ne s ’ affichent pas sur cet a...
Page 81 - Réglage de l; Réglages sonores
Introduction aux réglagessonores 1 Appuyez sur MULTI-CONTROL pour affi- cher le menu principal. 2 Utilisez MULTI-CONTROL pour choisir AUDIO. Tournez pour changer l ’ option de menu. Ap- puyez pour sélectionner. 3 Tourner MULTI-CONTROL pour sélec- tionner la fonction audio. Tournez MULTI-CONTROL pour...
Page 82 - Rappel d; Réglage des courbes d
Utilisation de l ’ égaliseur L ’ égaliseur vous permet de corriger les carac- téristiques sonores de l ’ intérieur du véhicule en fonction de vos goûts. Rappel d ’ une courbe d ’ égalisation Six courbes d ’ égalisation sont enregistrées et vous pouvez les rappeler à n ’ importe quel mo- ment. Voici ...
Page 83 - égalisation; Fréquence centrale; extrêmes graves
Réglage fin de la courbed ’ égalisation Vous pouvez ajuster la fréquence centrale et lefacteur Q (caractéristiques de la courbe) dechacune des gammes de fréquence actuelle-ment sélectionnée ( LOW / MID / HI ). Niveau (dB) Fréquence centrale Q=2N Q=2W Fréquence (Hz) 1 Utilisez MULTI-CONTROL pour choi...
Page 84 - Fréquence de coupure; Utilisation du filtre passe-haut
2 Sélectionnez le mode de réglage SW SETTING 1. 3 Tournez MULTI-CONTROL pour choisir le réglage désiré.NORMAL (phase normale) — REV (phase in- versée) — OFF (haut-parleur d ’ extrêmes graves désactivé) # Vous pouvez effectuer les mêmes opérations en poussant MULTI-CONTROL vers le haut ou vers les ba...
Page 85 - Accentuation des graves
# Vous pouvez effectuer les mêmes opérations en poussant MULTI-CONTROL vers le haut ou vers les bas. Accentuation des graves La fonction accentuation des graves renforcele niveau sonore des graves. 1 Appuyez de façon prolongée sur BASS pour afficher le mode de réglageBASS BOOST. 2 Tournez MULTI-CONT...
Page 86 - avertissement; Utilisation de la source AUX; Réglages initiaux
Ajustement des réglagesinitiaux 1 Maintenez la pression sur SOURCE jus- qu ’ à ce que l ’ appareil soit mis hors tension. 2 Appuyez sur MULTI-CONTROL jusqu ’ à ce que CLOCK SET apparaisse sur l ’ écran. 3 Tournez MULTI-CONTROL pour choisir un des réglages initiaux.CLOCK SET (horloge) — WARNING TONE ...
Page 88 - file une fois seulement.; Activation de la source; , mais vous pouvez le modifier
2 Appuyez sur MULTI-CONTROL pour mettre la démonstration des fonctions enservice. # Appuyez à nouveau sur MULTI-CONTROL pour mettre la démonstration des fonctions horsservice. Remarques ! Rappelez-vous que si la démonstration desfonctions continue à fonctionner quand lemoteur est coupé, cela peut dé...
Page 89 - adaptateur; indiquer; Utilisez MULTI-CONTROL pour choisir le
4 Appuyez sur MULTI-CONTROL pour pla- cer le curseur sur la position suivante. # Vous pouvez aussi effectuer les mêmes opéra- tions en poussant MULTI-CONTROL vers la droite. 5 Après avoir entré le code PIN (jusqu ’ à 4 chiffres), appuyez sur MULTI-CONTROL defaçon prolongée. Le code PIN peut être mém...
Page 90 - Autres fonctions
Utilisation de la source AUX Deux appareils auxiliaires (magnétoscope ouappareils portables vendus séparément) peu-vent être connectés à cet appareil. Lorsquedes appareils auxiliaires sont connectés, ilssont automatiquement lus en tant que sour-ces AUX et affectés à AUX1 ou AUX2 . La rela- tion entr...
Page 92 - Accessoires disponibles
Lecture de plagesmusicales sur l ’ iPod Utilisation de base Vous pouvez utiliser cet appareil pour comman-der un adaptateur interface pour iPod, vendu sé-parément. % Avance ou retour rapide Poussez MULTI-CONTROL vers la gauche ou vers la droite et maintenez la pression pendantenviron une seconde pui...
Page 93 - Appuyez répétitivement sur RDM pour; Audio Bluetooth; Avance ou retour rapide
Remarques ! Vous pouvez aussi sélectionner la fonction enappuyant sur FUNCTION de la télécom- mande. ! Appuyez sur BACK pour revenir à l ’ affichage précédent. ! Pour revenir au menu principal, appuyez defaçon prolongée sur BACK . ! Appuyez sur BAND/ESC pour revenir à l ’ affi- chage ordinaire. ! Si...
Page 94 - Connexion d
% Sélectionner une plage Poussez MULTI-CONTROL vers la gauche ou vers la droite. Remarques ! Pour avoir des détails sur le mode de fonction-nement, reportez-vous au mode d ’ emploi de l ’ adaptateur Bluetooth. Cette section donne de brèves informations sur le fonctionnementdu lecteur audio Bluetooth...
Page 95 - affiche. Le lecteur audio; Téléphone Bluetooth
Remarque Avant de pouvoir utiliser des lecteurs audio, vousdevrez peut-être entrer le code PIN dans cet appa-reil. Si votre lecteur nécessite un code PIN pourétablir une connexion, recherchez le code sur lelecteur ou sur la documentation qui l ’ accompa- gne. Reportez-vous à la page 88, Saisie du co...
Page 96 - Exécution d; Reconnaissance vocale; Prise d; Réponse à ou rejet d; Fonctionnement d
Réglage pour la téléphoniemains libres Avant de pouvoir utiliser la fonction téléphoniemains libres, vous devez préparer l ’ appareil pour une utilisation avec votre téléphone cellu-laire. Ceci implique d ’ établir une connexion sans fil Bluetooth entre l ’ appareil et votre télé- phone, d ’ enregis...
Page 97 - Si le téléphone n
% Terminer tous les appels Poussez MULTI-CONTROL vers le bas. % Basculer entre les appelants en attente Appuyez sur MULTI-CONTROL . # Vous pouvez aussi effectuer cette opération en poussant MULTI-CONTROL vers le haut. % Rejet d ’ un appel en attente Poussez MULTI-CONTROL vers le bas. Remarques ! Pou...
Page 98 - Utilisation d
! Si un téléphone cellulaire est connecté à cetappareil via la technologie sans fil Bluetoothavec HSP (Head Set Profile), les fonctions CLEAR MEMORY et NUMBER DIAL ne peu- vent pas être sélectionnées. ! Si vous n ’ utilisez pas de fonctions hormis SEARCH PHONE , CONNECTION OPEN , CONNECT PHONE , PH ...
Page 100 - Transfert des entrées dans l
Connexion à un téléphonecellulaire enregistré Connexion manuelle à un téléphoneenregistré 1 Utilisez MULTI-CONTROL pour sélec- tionner CONNECT PHONE dans le menu desfonctions. 2 Appuyez sur MULTI-CONTROL pour affi- cher le mode de paramétrage. 3 Tournez MULTI-CONTROL pour sélec- tionner une affectat...
Page 102 - Effacement de la mémoire; Paramétrage du rejet automatique
3 Tournez MULTI-CONTROL pour sélec- tionner un numéro. # Vous pouvez effectuer les mêmes opérations en poussant MULTI-CONTROL vers le haut ou vers les bas. 4 Appuyez sur MULTI-CONTROL pour pla- cer le curseur sur la position suivante. # Vous pouvez entrer un maximum de 24 chif- fres. 5 Quand vous av...
Page 103 - Syntoniseur XM
Annulation d ’ écho et réduction de bruit 1 Utilisez MULTI-CONTROL pour sélec- tionner ECHO CANCEL dans le menu desfonctions. 2 Appuyez sur MULTI-CONTROL pour mettre l ’ annulation d ’ écho en service. # Appuyez à nouveau sur MULTI-CONTROL pour mettre l ’ annulation d ’ écho hors service. Syntoniseu...
Page 104 - Changement du; Affichage de l; Écoute de la radio satellite SIRIUS
Changement du mode desélection du canal XM Vous disposez de deux méthodes pour sélec-tionner un canal : par numéro et par catégorie.Quand vous sélectionnez par numéro, des ca-naux appartenant à n ’ importe quelle catégorie peuvent être sélectionnés. Sélectionnez parcatégorie pour restreindre votre r...
Page 105 - Changement de l; émission
% Sélectionnez un canal. Poussez MULTI-CONTROL vers la gauche ou vers la droite. # Si vous poussez de façon prolongée MULTI-CONTROL vers la gauche ou vers la droite, vous pouvez augmenter ou diminuer le nu-méro de canal de façon continue. # Vous pouvez aussi effectuer un accord dans une catégorie de...
Page 108 - Lecteur de CD à chargeur; Utilisation des fonctions CD TEXT
Lecteur de CD à chargeur Opérations de base Vous pouvez utiliser cet appareil pour comman-der un lecteur de CD à chargeur, vendu séparé-ment. ! Seules les fonctions mentionnées dans cemode d ’ emploi sont prises en compte par les lecteurs de CD à chargeur 50 disques. ! Cet appareil n ’ est pas conçu...
Page 109 - accentuation dynamique; ajuster la qualité du son du lec-; Utilisation des listes ITS; venance d
Nom de la fonction Utilisation REPEAT Reportez-vous à la page 72, Sélection d ’ une étendue de ré- pétition de lecture . Cependant, les étendues derépétition de la lecture quevous pouvez sélectionner dif-fèrent de celles du lecteur deCD intégré. Les étendues derépétition de la lecture du lec-teur de...
Page 110 - Lecture à partir de
Création d ’ une liste de lecture avec la sélection instantanée des plages ITS 1 Jouez un CD que vous voulez program- mer. Poussez MULTI-CONTROL vers le haut ou vers le bas pour choisir le CD. 2 Utilisez MULTI-CONTROL pour sélec- tionner ITS MEMORY dans le menu desfonctions. 3 Appuyez sur MULTI-CONT...
Page 111 - Syntoniseur TV
2 Utilisez MULTI-CONTROL pour sélec- tionner ITS MEMORY dans le menu desfonctions. 3 Appuyez sur MULTI-CONTROL pour affi- cher le mode de paramétrage. 4 Appuyez sur MULTI-CONTROL pour choisir DELETE. Toutes les plages du CD en cours de lecturesont supprimées de la liste de lecture et MEMORY DELETED ...
Page 113 - entretien agréé par Pioneer le plus
Messages d ’ erreur Quand vous contactez votre distributeur ou leService d ’ entretien agréé par Pioneer le plus proche, n ’ oubliez pas de noter le message d ’ erreur. Lecteur de CD intégré Message Causes possi-bles Action corrective ERROR-11, 12,17, 30 Disque sale Nettoyez le disque. ERROR-11, 12,...
Page 115 - Disques Duaux
! La lecture de disques CD-R/CD-RW non fi-nalisés n ’ est pas possible. ! Ne touchez pas la surface enregistrée desdisques. ! Rangez les disques dans leur coffret dèsque vous ne les écoutez plus. ! Évitez de laisser les disques dans des envi-ronnements trop chauds, en particulier à lalumière directe...
Page 116 - WAV
! Fréquence d ’ échantillonnage : 11,025 kHz à 48 kHz ! Débit de transmission : 16 kbit/s à 320 kbit/s ! Fichier AAC acheté sur le iTunes MusicStore (extension de fichier .mp4) : Non ! Apple Lossless : Non WAV ! Format compatible : PCM Linéaire (LPCM),MS ADPCM ! Bits de quantification : 8 et 16 (LPC...
Page 117 - Exemple de hiérarchie
! Le nombre maximum de fichiers pouvantêtre lus sur un lecteur audio portable USBou une mémoire USB est 15 000. ! Le nombre maximum de dossiers pouvantêtre lus sur un lecteur audio portable USBou une mémoire USB est 500. ! Le nombre maximum de niveaux de réper-toires pouvant être lus sur un lecteur ...
Page 121 - PIONEER CORPORATION
PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KUTOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, BelgiumTEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE ...