Page 3 - Contents
Contents 3 Contents Customer self repair ...................................................................................................................... 5 Parts only warranty service .................................................................................................................
Page 5 - Customer self repair; Parts only warranty service
Customer self repair 5 Customer self repair HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time and allow for greater flexibility in performing defective parts replacement. If during the diagnosis period HP (or HP service providers or service partners) identif...
Page 6 - Riparazione da parte del cliente
Customer self repair 6 • Obligatoire - Pièces pour lesquelles la réparation par le client est obligatoire. Si vous demandez à HP de remplacer ces pièces, les coûts de déplacement et main d'œuvre du service vous seront facturés. • Facultatif - Pièces pour lesquelles la réparation par le client est fa...
Page 7 - Servizio di garanzia per i soli componenti; Customer Self Repair
Customer self repair 7 In base alla disponibilità e alla località geografica, le parti CSR vengono spedite con consegna entro il giorno lavorativo seguente. La consegna nel giorno stesso o entro quattro ore è offerta con un supplemento di costo solo in alcune zone. In caso di necessità si può richie...
Page 8 - Reparaciones del propio cliente
Customer self repair 8 stellen. Im Falle von Customer Self Repair kommt HP für alle Kosten für die Lieferung und Rücksendung auf und bestimmt den Kurier-/Frachtdienst. Weitere Informationen über das HP Customer Self Repair Programm erhalten Sie von Ihrem Servicepartner vor Ort. Informationen über da...
Page 9 - Servicio de garantía exclusivo de componentes
Customer self repair 9 Para obtener más información acerca del programa de Reparaciones del propio cliente de HP, póngase en contacto con su proveedor de servicios local. Si está interesado en el programa para Norteamérica, visite la página web de HP siguiente ( http://www.hp.com/go/selfrepair ). Se...
Page 10 - Reparo feito pelo cliente; Serviço de garantia apenas para peças
Customer self repair 10 Garantieservice "Parts Only" Het is mogelijk dat de HP garantie alleen de garantieservice "Parts Only" omvat. Volgens de bepalingen van de Parts Only garantieservice zal HP kosteloos vervangende onderdelen ter beschikking stellen. Voor de Parts Only garantiese...
Page 15 - Illustrated parts catalog; In this section; Mechanical components
Illustrated parts catalog 15 Illustrated parts catalog In this section Mechanical components ......................................................................................................................... 15 System components ...................................................................
Page 19 - System components
Illustrated parts catalog 19 System components Item Description Assembly part number Spare part number Customer self repair (on page 5 ) System components 1 Fan assembly — — — a) System fan module* 396376-001 398406-001 Mandatory 1 b) Fan duct* 396377-001 398407-001 Mandatory 1 2 Processor heatsink/...
Page 23 - Removal and replacement procedures; Required tools; Safety considerations; Preventing electrostatic discharge
Removal and replacement procedures 23 Removal and replacement procedures In this section Required tools ........................................................................................................................................ 23 Safety considerations .....................................
Page 24 - Server warnings and cautions; Rack warnings and cautions
Removal and replacement procedures 24 • Avoid hand contact by transporting and storing products in static-safe containers. • Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations. • Place parts on a grounded surface before removing them from their conta...
Page 25 - Preparation procedures; Power down the server
Removal and replacement procedures 25 WARNING: When installing a server in a telco rack, be sure that the rack frame is adequately secured to the top and bottom of the building structure. WARNING: This server is very heavy. To reduce the risk of personal injury or damage to the equipment: • Observe ...
Page 26 - Access panel
Removal and replacement procedures 26 2. Remove the bezel. To replace the component, reverse the removal procedure. Access panel WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them. CAUTION: Do not operate...
Page 27 - Hot-plug SCSI hard drive
Removal and replacement procedures 27 Hot-plug SCSI hard drive CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank. To remove the component: 1. Determine the status of the hard drive from the hot-plug har...
Page 30 - Hot-plug SCSI backplane
Removal and replacement procedures 30 To replace the component, reverse the removal procedure. Hot-plug SCSI, SAS, or SATA hard drive cage To remove the component: 1. Power down the server (on page 25 ). 2. Remove the bezel (on page 25 ). 3. Remove the access panel (" Access panel " on page ...
Page 31 - Hot-plug SAS or SATA backplane
Removal and replacement procedures 31 7. Remove the SCSI backplane. To replace the component, reverse the removal procedure. Hot-plug SAS or SATA backplane To remove the component: 1. Power down the server (on page 25 ). 2. Remove the bezel (on page 25 ). 3. Remove the access panel (" Access pan...
Page 32 - Diskette drive
Removal and replacement procedures 32 To replace the component, reverse the removal procedure. Diskette drive CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank. To remove the component: 1. Power down th...
Page 33 - Air baffle; Power supply
Removal and replacement procedures 33 5. Remove the CD-ROM or DVD-ROM drive. To replace the component, reverse the removal procedure. Air baffle To remove the component: 1. Power down the server (on page 25 ). 2. Remove the bezel (on page 25 ). 3. Remove the access panel (" Access panel " on...
Page 34 - DIMM
Removal and replacement procedures 34 1. Power down the server (on page 25 ). 2. Remove the bezel (on page 25 ). 3. Remove the access panel (" Access panel " on page 26 ). 4. Remove the air baffle (" Air baffle " on page 33 ). 5. Disconnect the power and signal cables. 6. Remove the ...
Page 36 - Processor assembly
Removal and replacement procedures 36 Channel A Channel A Channel B Channel B Total memory Mode Slot 1 Slot 2 Slot 3 Slot 4 1 GB 1 GB 2 GB 2 GB 6 GB Dual-channel interleaved 2 GB 2 GB 2 GB 2 GB 8 GB Dual-channel interleaved Processor assembly IMPORTANT: To avoid damage to the processor and system bo...
Page 38 - PCI expansion board
Removal and replacement procedures 38 CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an "X" pattern). 4. Connect the fan cable to the system board. 5. Install the air baffle. 6. Install the access panel. 7. Install the bezel. PCI expansion board To re...
Page 39 - Fan assembly; Power button/LED board
Removal and replacement procedures 39 Fan assembly To remove the component: 1. Power down the server (on page 25 ). 2. Remove the bezel (on page 25 ). 3. Remove the access panel (" Access panel " on page 26 ). 4. Remove the air baffle (" Air baffle " on page 33 ). 5. Remove the fan a...
Page 40 - Battery
Removal and replacement procedures 40 1. Power down the server (on page 25 ). 2. Remove the bezel (on page 25 ). 3. Remove the access panel (" Access panel " on page 26 ). 4. Disconnect the power and data cables. 5. Remove the front panel assembly. 6. Remove the power button/LED board. To re...
Page 41 - System board
Removal and replacement procedures 41 • Do not attempt to recharge the battery. • Do not expose the battery to temperatures higher than 60°C (140°F). • Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. • Replace only with the spare designated for this prod...
Page 43 - Cabling; Hot-plug SCSI hard drive cabling
Cabling 43 Cabling In this section Hot-plug SCSI hard drive cabling ............................................................................................................. 43 Non-hot-plug SCSI hard drive cabling .....................................................................................
Page 44 - Hot-plug SATA hard drive cabling
Cabling 44 Non-hot-plug SCSI hard drive cabling Item Description 1 SCSI cable 2 Power cable Hot-plug SATA hard drive cabling Item Description 1 Power cable 2 SATA cable
Page 45 - SAS hard drive cabling
Cabling 45 Non-hot-plug SATA hard drive cabling Item Description 1 SATA cable 2 Power cable SAS hard drive cabling Item Description 1 Power cable 2 SAS cable
Page 46 - Diagnostic tools; Survey Utility; Array Diagnostic Utility
Diagnostic tools 46 Diagnostic tools In this section Survey Utility.......................................................................................................................................... 46 Array Diagnostic Utility .....................................................................
Page 47 - Integrated Management Log
Diagnostic tools 47 Integrated Management Log The IML records hundreds of events and stores them in an easy-to-view form. The IML timestamps each event with 1-minute granularity. You can view recorded events in the IML in several ways, including the following: • From within HP SIM • From within Surv...
Page 48 - Component identification; Front panel components
Component identification 48 Component identification In this section Front panel components .......................................................................................................................... 48 Front panel LEDs and buttons ........................................................
Page 49 - Front panel LEDs and buttons
Component identification 49 Item Description 6 CD-ROM/DVD-ROM drive Front panel LEDs and buttons Item Description Status 1 CD-ROM/DVD-ROM drive ejector button N/A 2 Power On/Standby button N/A 3 System power LED Green = System has AC power and is functioning. Amber = System has AC power and is in st...
Page 50 - Rear panel components; Rear panel LEDs
Component identification 50 Rear panel components Item Description 1 Power cord connector 2 Mouse connector 3 Keyboard connector 4 Serial connector 5 Video connector 6 USB connectors (2) 7 RJ-45 Ethernet connector 8 RJ-45 connector (iLO 2) 9 Parallel connector Rear panel LEDs
Page 51 - System board components
Component identification 51 Item Description Status 1 NIC link LED On = Link Off = No link 2 NIC activity LED Flashing = Activity Off = No activity System board components Items Description 1 Processor power connector 2 System power connector 3 DIMM slot 4 (Channel B) 4 DIMM slot 3 (Channel B) 5 DIM...
Page 52 - System maintenance switch
Component identification 52 Items Description 20 System fan connector * x8 PCI Express cards are supported, but will run at x4 speeds. System maintenance switch Position Default Function S1 Off Off = iLO 2 security is enabled On = iLO 2 security is disabled S2 Off Off = System configuration can be c...
Page 53 - System board LEDs
Component identification 53 System board LEDs Item Description Status 1 PPM failure Amber = PPM failed or missing Off = Normal 2 DIMM 4 failure Amber = DIMM 4 has failed or is missing Off = Normal 3 DIMM 3 failure Amber = DIMM 3 has failed or is missing Off = Normal 4 DIMM 2 failure Amber = DIMM 2 h...
Page 54 - System LEDs and internal health LED combinations
Component identification 54 Item Description Status 11 Single bit error Amber = Single bit error limit has been exceeded Off = Normal 12 System fan failure Amber = System fan has failed or is missing Off = Normal System LEDs and internal health LED combinations When the internal health LED on the fr...
Page 55 - SCSI IDs
Component identification 55 SCSI IDs Hot-plug SCSI hard drive LEDs Item Description Status 1 Activity status On = Drive activity Flashing = High activity on the drive or drive is being configured as part of an array. Off = No drive activity 2 Online status On = Drive is part of an array and is curre...
Page 56 - Hot-plug SCSI hard drive LED combinations
Component identification 56 Item Description Status 3 Fault status On = Drive failure Flashing = Fault-process activity Off = No fault-process activity Hot-plug SCSI hard drive LED combinations Activity LED Online LED Fault LED Interpretation On, off, or flashing On or off Flashing A predictive fail...
Page 57 - Hot-plug SAS and SATA device numbers; SAS and SATA hard drive LED combinations
Component identification 57 Hot-plug SAS and SATA device numbers SAS and SATA hard drive LEDs Item Description 1 Fault/UID LED (amber/blue) 2 Online LED (green) SAS and SATA hard drive LED combinations Online/activity LED (green) Fault/UID LED (amber/blue) Interpretation On, off, or flashing Alterna...
Page 58 - Fans
Component identification 58 Online/activity LED (green) Fault/UID LED (amber/blue) Interpretation On, off, or flashing Steadily blue The drive is operating normally, and it has been selected by a management application. On Amber, flashing regularly (1 Hz) A predictive failure alert has been received...
Page 60 - Specifications; Server specifications; Environmental specifications
Specifications 60 Specifications In this section Server specifications ............................................................................................................................... 60 Environmental specifications ........................................................................
Page 61 - Hot-plug power supply calculations
Specifications 61 Specification Value Maximum wet bulb temperature 28 ° C (82.4 ° F) Relative humidity (noncondensing)** Operating 20% to 80% Non-operating 20% to 90% * All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3048 m (10,000 ft) i...
Page 62 - CD-ROM drive specifications; Hard drive specifications
Specifications 62 CD-ROM drive specifications Specification Value Disk formats CD-ROM (modes 1 and 2); mixed mode (audio and data combined); CD-DA; Photo CD (single/multiple-session), CD-XA ready; CDi ready Capacity 550 MB (mode 1, 12 cm) 640 MB (mode 2, 12 cm) Block size 2368, 2352 bytes (mode 0) 2...
Page 63 - DVD-ROM drive specifications
Specifications 63 Item 36.4-GB Ultra320 SCSI drive 80-GB SATA drive Height 1.0 in (One-third height) 1.028 in Width 4.0 in 4.0 in Interface Ultra320 SCSI Serial ATA Transfer rate 320 MB/sec 1.5 GB/s Rotational speed 15,000 rpm 7,200 rpm Bytes per sector 512 512 Logical blocks 71,132,000 156,301,488 ...
Page 65 - Acronyms and abbreviations
Acronyms and abbreviations 65 Acronyms and abbreviations ASR Automatic Server Recovery DDR double data rate DIMM dual inline memory module ECC error checking and correcting iLO 2 Integrated Lights-Out 2 IML Integrated Management Log NIC network interface controller NVRAM non-volatile memory PCI-X pe...
Page 67 - Index
Index 67 A AC power supply 33, 50 access panel 26 ADU (Array Diagnostic Utility) 46 Array Diagnostic Utility (ADU) 46 ASR (Automatic Server Recovery) 65 Automatic Server Recovery (ASR) 65 B battery 40, 41 buttons 48 C cables 43 cabling 43, 44, 45 CD-ROM drive 32, 62 component identification 48, 57 c...
