Pioneer HPR 09A2 - User Manual

Installation batteries 1. Press down on the back of the remote control as shown in the image to the right. Push out the cover of the battery box in the direction of the arrow. 2. Install two AAA batteries. 3. Reinstall the cover of the battery box. Battery lid switch Operation guide 1. After connect...

Buttons on Remote Control On/Off button Press this button to turn the air conditioner on or off. Mode button Press this button to select your required operation mode. ● When selecting auto mode, your air conditioner will operate automatically according to factory settings. The set temperature can’t ...

Buttons on Remote Control • The set temperature range on the remote controller is: 16~31°C ; • The set fan speeds are: Auto. Fan1, Fan2, Fan3, Fan4, Fan5, Turbo. Fan button Press this button to set fan speed: auto(AUTO), fan1( ), fan2( ), Fan3( ), fan4( ), fan5( ), turbo( ), stepless speed. Note: ● ...

Buttons on Remote Control Sleep button Press this button to turn the sleep function on or off under cooling, dry, and heating mode. Note: ● By default, this function is default switched off when you power on your unit. ● It will be cleared after changing the mode. ● The sleep button can’t be used in...

Buttons on Remote Control temperature according to the detected temperature. Press this button again to close i feel function and “ ” will disappear. Note: Please keep the remote controller near the user and confirm the unit can receive the remote code when this function is set. Do not put the remot...

Buttons on Remote Control 2. Switch from Celsius to Fahrenheit In the off mode, press “ ” and “ ” buttons simultaneously to switch temperature display between °C and °F . 3. Wi-Fi Press " " and " " buttons for 3 seconds to activate the Wi-Fi setting. Note: This is an optional functio...

Buttons on Remote Control ● Turn off the air conditioner and disconnect the power before cleaning the air conditioner to avoid electric shock. ● Beware of electric shocks. Do not wash the air conditioner with water. ● Do not use abrasive / volatile liquid to clean the air conditioner. Clean surface ...

Buttons on Remote Control Note: ● Clean the filter at least every three months. Clean more frequently if the unit operates in a very dusty environment. ● After removing the filter, do not touch the fins as fins are sharp to avoid injury. ● Do not use an open flame or hair dryer to dry the filter. Th...

Buttons on Remote Control Problem solving hints and tips Please check the list below. If the problem can’t be solved, please contact your local dealer or a qualified professional. Problem Possible cause Possible solution Your remote control isn’t working or the unit can’t receive its signal? Your re...

Problem Solving Error Codes When there is a problem with your air conditioner, the temperature indicator on indoor unit will blink to display an error code. Please see a description of error codes below. Note: This diagram is only for reference. Please refer to your individual product to find the ac...

Problem Solving Contact us When below phenomenon occurs, please turn off air conditioner and disconnect power immediately, and then contact the dealer or qualified professionals for service. ● Power cord is overheating or damaged. ● Air conditioner gives off burning smell. ● There’s abnormal sound d...