Page 2 - After you have finished reading the instructions, keep this man-; Before You Start; Contents
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operateyour model properly. After you have finished reading the instructions, keep this man- ual in a safe place for future reference. Before You Start Information to User 5 For Canadi...
Page 3 - Available accessories; English
– Adjusting the brightness 26 – Setting the rear output and subwoofercontroller 26 – Switching the sound muting/attenuation 27 – Switching the feature demo 27 – Switching the reverse mode 27 – Switching the Ever Scroll 27 – Activating the BT Audio source 27 – Entering PIN code for Bluetoothwireless ...
Page 4 - Additional Information
– Registering connected cellularphone 44 – Deleting a registered phone 44 – Connecting to a registered cellularphone 45 – Using the Phone Book 45 – Using the Call History 47 – Using preset numbers 48 – Making a call by entering phonenumber 48 – Clearing memory 48 – Setting the automatic rejecting 49...
Page 5 - Information to User; s right to operate the equipment.; For Canadian model; WARNING; Wash hands; CAUTION; Protect this unit from moisture.; About WMA
Information to User Alteration or modifications carried out withoutappropriate authorization may invalidate theuser ’ s right to operate the equipment. For Canadian model This Class B digital apparatus complies withCanadian ICES-003. About this unit The tuner frequencies on this unit are allo-cated ...
Page 7 - CANADA; Visit our website; Visit us at the following site:; Download owner; The front panel can be detached to deter theft.; Important; Removing the front panel
U.S.A. Pioneer Electronics (USA) Inc.CUSTOMER SUPPORT DIVISIONP.O. Box 1760Long Beach, CA 90801-1760800-421-1404 CANADA Pioneer Electronics of Canada, Inc.CUSTOMER SATISFACTION DEPARTMENT300 Allstate ParkwayMarkham, Ontario L3R OP21-877-283-5901 For warranty information please see the Lim-ited Warra...
Page 8 - About the demo mode; Reverse mode; Installing the battery; Use only one; Using the remote control
About the demo mode This unit features two demonstration modes.One is the reverse mode, the other is the fea-ture demo mode. Important The red lead (ACC) of this unit should be con-nected to a terminal coupled with ignition switchon/off operations. If this is not done, the vehiclebattery may be drai...
Page 9 - Head unit; Operating this unit
What ’ s What Head unit 1 SOURCE button This unit is turned on by selecting a source.Press to cycle through all the availablesources. 2 MULTI-CONTROL Move to perform manual seek tuning, fastforward, reverse and track search controls.Also used for controlling functions.Turn to increase or decrease th...
Page 10 - Basic Operations; Turning the unit on; Selecting a source; Notes
d DIRECT button Press to directly select the desired track. e CLEAR button Press to cancel the input number when 0 to 9 are used. f 0 to 9 buttons Press to directly select the desired track,preset tuning or disc. Buttons 1 to 6 can op- erate the preset tuning for the tuner or discnumber search for t...
Page 11 - Adjusting the volume; Tuner; LOC; Press
! External unit refers to a Pioneer product (suchas one available in the future) that, althoughincompatible as a source, enables control ofbasic functions by this unit. Two external unitscan be controlled by this unit. When two exter-nal units are connected, the allocation ofthem to external unit 1 ...
Page 12 - Note; FUNCTION
Note Listening AM radio while connecting iPod to thisunit may generate noise. In this case, disconnectiPod from this unit and noise is disappeared. Storing and recalling broadcastfrequencies You can easily store up to six broadcast fre-quencies for later recall. ! Up to 18 FM stations, six for each ...
Page 13 - Turn to change the station press to select.; Tuning in strong signals; The; played instead of bit rate value.
1 Use MULTI-CONTROL to select BSM in the function menu. 2 Press MULTI-CONTROL to turn BSM on. Six strongest broadcast frequencies will bestored in the order of their signal strength. # To cancel the storage process, press MULTI-CONTROL again. 3 Use MULTI-CONTROL to select the de- sired station. Turn...
Page 14 - Playback will automatically start.; Be sure to turn up the label side of a disc.; Close the front panel.; Searching ever y 10 tracks in the current; To skip back or forward to another; Selecting a track directly; Track number input display appears.
Disc loading slot EJECT button # To avoid a malfunction, make sure that no metal object comes into contact with the term-inals when the front panel is open. 2 Insert a CD (CD-ROM) into the disc load- ing slot. Playback will automatically start. # Be sure to turn up the label side of a disc. # After ...
Page 15 - Scanning folders and tracks; Selecting a repeat play range
Introduction of advancedoperations 1 Press MULTI-CONTROL to display the main menu.FUNCTION , AUDIO and ENTERTAINMENT appear on the display. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option; press to se-lect.The function name appears on the display. 3 Turn MULTI-CONTROL to selec...
Page 16 - Scan mode; Pausing disc playback; Rough search; Using disc title functions; Entering disc titles
3 When you find the desired track press MULTI-CONTROL to turn scan play off. # If the display has automatically returned to the playback display, select Scan mode again by using MULTI-CONTROL . # After scanning of a disc (folder) is finished, normal playback of the tracks will begin again. Pausing d...
Page 17 - Press DISPLAY to select the desired text; Press LIST to switch to the track title list; You can also change the track title by pushing
6 Move the cursor to the last position by pushing MULTI-CONTROL right after enter-ing the title. When you push MULTI-CONTROL right one more time, the entered title is stored in mem-ory. 7 Press BAND to return to the playback display. Notes ! Titles remain in memory, even after the dischas been remov...
Page 18 - Press LIST to switch to the file name list; Playing songs on iPod; You can use this unit to control an iPod.; SOURCE; To perform fast forward or reverse,
1 Press LIST to switch to the file name list mode. Names of files and folders appear in the dis-play. 2 Use MULTI-CONTROL to select the de- sired file name (or folder name). Turn to change the name of file or folder;press to play; push right to see a list of thefiles (or folders) in the selected fol...
Page 19 - Browsing for a song
! While the iPod is connected to this unit, theiPod itself cannot be turned on or off. ! The iPod connected to this unit is turned offabout two minutes after the ignition switch isset to OFF. Browsing for a song The operation of this unit to control an iPod isdesigned to be as close to the operation...
Page 20 - Repeating play; Repeat One; Pausing a song
Repeating play For playback of the songs on the iPod, thereare two repeat play ranges: Repeat One (re- peat one song) and Repeat All (repeat all songs in the list). ! While Play mode is set to Repeat One , you cannot select the other songs. 1 Use MULTI-CONTROL to select Play mode in the function men...
Page 21 - Audio Adjustments; Introduction of audio adjustments; AUDIO; Using balance adjustment; Balance; Using the equalizer; Recalling equalizer curves
Audio Adjustments Introduction of audio adjustments 1 1 1 1 Audio displayShows the audio adjustment status. 1 Press MULTI-CONTROL to display the main menu.FUNCTION , AUDIO and ENTERTAINMENT appear on the display. 2 Use MULTI-CONTROL to select AUDIO. Turn to change the menu option; press to se-lect.T...
Page 22 - Adjusting equalizer curves; The actual range of the adjustments are differ-; Adjusting 7-band graphic equalizer; Recalling equalizer cur ves
Custom 1 Custom 1 Custom 2 Custom 2 Flat Flat Super Bass (S.Bass) Super bass ! Custom 1 and Custom 2 are adjusted equalizer curves that you create. Adjust-ments can be made with a 7-band graphicequalizer. ! When Flat is selected no supplement or correction is made to the sound. This isuseful to chec...
Page 23 - Adjusting subwoofer settings; SW; Boosting the bass; SW
+6 to – 6 is displayed as the level is increased or decreased. # You can then select another band and adjust the level. 5 Press BAND to cancel the 7-band gra- phic equalizer adjustment. Adjusting loudness Loudness compensates for deficiencies in thelow- and high-sound ranges at low volume. 1 Use MUL...
Page 24 - Using the high pass filter; If the high pass filter has been previously ad-; Adjusting source levels
2 Push MULTI-CONTROL up or down to select a desired level.0 to +6 is displayed as the level is increased or decreased. Using the high pass filter When you do not want low sounds from thesubwoofer output frequency range to playfrom the front or rear speakers, turn on theHPF (high pass filter). Only f...
Page 25 - Initial Settings; Adjusting initial settings; Selecting the display language; Switching the warning tone
Initial Settings Adjusting initial settings Using the initial settings, you can customizevarious system settings to achieve optimal per-formance from this unit. 1 1 1 1 Function displayShows the function status. 1 Press SOURCE and hold until the unit turns off. 2 Press MULTI-CONTROL and hold until L...
Page 26 - Switching the auxiliary setting; Using; Switching the dimmer setting
1 Use MULTI-CONTROL to select Warning tone. 2 Press MULTI-CONTROL to turn warning tone on. # To turn warning tone off, press MULTI-CONTROL again. Switching the auxiliary setting Auxiliary equipments connected to this unitcan be activated individually. Set each AUXsource to ON when using. About conne...
Page 27 - Switching the feature demo; Switching the reverse mode; Switching the Ever Scroll; BT Audio
Switching the sound muting/attenuation Sound from this system is muted or attenu-ated automatically when the signal from theequipment with mute function is received. ! The sound is muted or attenuated, MUTE or ATT are displayed and no audio adjust- ment is possible. ! Sound from this system returns ...
Page 28 - Pushing; Other Functions; Using the AUX source; About; Insert the stereo mini plug into the; You can only make this type of connection if
Entering PIN code for Bluetoothwireless connection To connect your cellular phone to this unit viaBluetooth wireless technology, you need toenter PIN code on your phone to verify theconnection. The default code is 0000 , but you can change this in this function. ! With some Bluetooth audio players, ...
Page 29 - Selecting AUX as the source; ing the auxiliar y setting; Setting the AUX title; tering disc titles; Turning the clock display on or off
Selecting AUX as the source % Press SOURCE to select AUX as the source. # If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliar y setting on page 26. Setting the AUX title The title displayed for each AUX1 or AUX2 source can be changed. 1 A...
Page 31 - BAND; lecting a track directly; Function and operation
Playing songs on USB portableaudio player/USB memory Basic Operations You can use this unit to control a USB adapter,which is sold separately. For details concerning operation, refer to theUSB adapter ’ s operation manual. This section provides information on USB portable audioplayer/USB memory oper...
Page 32 - Displaying text information on disc
Function name Operation Play mode Refer to Selecting a repeat play range on page 15. But the repeat play ranges you canselect are different from that of thebuilt-in CD player. The repeat playranges of the USB portable audioplayer/USB memory are as below: ! Track repeat – Repeat just the current file...
Page 33 - XM tuner; CH; Selecting an XM channel directly; CLEAR; Switching the XM display
XM tuner Basic Operations You can use this unit to control an XM satellitedigital tuner (GEX-P920XM), which is soldseparately. For details concerning operation, refer to theXM tuner ’ s operation manuals. This section provides information on XM operations withthis unit which differs from that descri...
Page 34 - Channel number; Displaying the Radio ID; Channel number select setting; RADIO ID
2 Use MULTI-CONTROL to store the se- lected station in memory. Turn to change the preset number; press andhold to store.The XM preset number you have selected willflash and then remain lit. The selected stationhas been stored in memory. 3 Use MULTI-CONTROL to select the de- sired station. Turn to ch...
Page 35 - SIRIUS Satellite Radio tuner; Selecting a SIRIUS channel; Selecting a SIRIUS channel directly
SIRIUS Satellite Radio tuner Basic Operations You can use this unit to control a SIRIUS Satel-lite Radio tuner, which is sold separately. When the SIRIUS tuner is used together withthis unit, some operations differ slightly fromthose described in the SIRIUS operation man-ual. This manual provides in...
Page 36 - Switching the SIRIUS display
2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option; press toselect.The function name appears on the display. 3 Turn MULTI-CONTROL to select the function. Turn MULTI-CONTROL to switch between the functions in the following order: Channel mode (channel select mode setting) — Team s...
Page 37 - Using the Game Alert function; Selecting teams for Game Alert; FULL; Switching the Game Alert on or off
Using the Game Alert function Only when SIR-PNR2/SIR-PNR2C is connectedto this unit, you can operate this function. This unit can alert you when games involvingyour favorite teams are about to start. To usethis function you need in advance to set up agame alert for the teams. Selecting teams for Gam...
Page 38 - If you select; Bluetooth Audio
Displaying the Radio ID If you select CH 000 , the ID code is displayed. % Push MULTI-CONTROL left or right to select CH 000. Bluetooth Audio Basic Operations If you connect Bluetooth adapter (e.g. CD-BTB100) to this unit, you can control Bluetoothaudio player via Bluetooth wireless technology. Impo...
Page 41 - Bluetooth Telephone; s operation manual. This; AUTO; Press SOURCE to select the telephone.; Setting up for hands-free phoning; Connection
Bluetooth Telephone Basic Operations If you use Bluetooth adapter (e.g. CD-BTB100),you can connect a cellular phone featuringBluetooth wireless technology to this unit forhands-free, wireless calls, even while driving. Important ! Since this unit is on standby to connect withyour cellular phones via...
Page 42 - Registering connected cellular phone; Making a phone call; Voice recognition; No voice dial; Taking a phone call; Answering an incoming call
# Your phone should now be temporarily con- nected; however, to make best use of the technol-ogy, we recommend you register the phone tothis unit. 2 Registration Refer to Registering connected cellular phone on page 44 for instructions on how to registeryour temporarily connected phone. 3 Volume adj...
Page 43 - Connecting a cellular phone; Searching for available cellular phones
Introduction of advancedoperations 1 Press MULTI-CONTROL to display the main menu.FUNCTION , AUDIO and ENTERTAINMENT appear on the display. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option; press to se-lect.Function names for hands-free phoning ap-pear on the display. 3 Turn MU...
Page 44 - is displayed and the unit is; Disconnecting a cellular phone; After the disconnection is completed,; When the registration is completed,; Deleting a registered phone; No data; is displayed. Deleting phone is
4 Press MULTI-CONTROL to connect the selected cellular phone. While connecting, Connecting flashes. To complete the connection, please check the de-vice name ( Pioneer BT Unit ) and enter the link code on your cellular phone. If the con-nection is established, Connected is dis- played. # The link co...
Page 45 - Using the Phone Book; Transferring entries to the Phone Book; The display indicates how many entries have; Changing the Phone Book display order
4 Press MULTI-CONTROL to delete the phone. After the phone is deleted, Deleted is dis- played. Connecting to a registeredcellular phone Connecting to a registered phonemanually 1 Use MULTI-CONTROL to select Connect phone in the function menu. 2 Push MULTI-CONTROL up or down to select a registration ...
Page 46 - Editing the name of a Phone Book entry; Calling a number in the; Editing phone numbers; Calling a number in the
3 Press MULTI-CONTROL to display en- tries. The display shows the first three Phone Bookentries starting with that letter (e.g. “ Ben ” , “ Brian ” and “ Burt ” when “ B ” is selected). 4 Push MULTI-CONTROL up or down to select a Phone Book entry you want to call. 5 Push MULTI-CONTROL right to displ...
Page 47 - Clearing a Phone Book entry; Using the Call History
4 Push MULTI-CONTROL left or right to move the cursor to the number you wantto change. 5 Push MULTI-CONTROL up or down to change numbers. Repeat these steps until you have finishedchanging. 6 Press MULTI-CONTROL to store the new number. Clearing a Phone Book entry Important You are required to park ...
Page 48 - Using preset numbers; Making a call by entering phone number; Clearing memory; All clear
Using preset numbers Important You are required to park your vehicle and set theparking brake in order to perform this operation. Numbers that you dial frequently can be as-signed to presets for quick recall. 1 Select a desired phone number from the Phone Book or the Call History. Or di-rectly enter...
Page 49 - unit appears in the display.
Setting the automatic rejecting 1 Use MULTI-CONTROL to select Refuse calls in the function menu. 2 Press MULTI-CONTROL to turn auto- matic call rejection on. # To turn automatic call rejection off, press MULTI-CONTROL again. Setting the automatic answering 1 Use MULTI-CONTROL to select Auto answer i...
Page 51 - and; Using ITS playlists; Creating a playlist with ITS programming; Push
# If you do not operate functions except for ITS memo and TitleInput "A" within about 30 seconds, the display is automatically returned tothe ordinary display. Function and operation Play mode , Random mode , Scan mode , Pause , Compression and TitleInput "A" op- erations are basical...
Page 52 - Playing tracks in random order; If no tracks in the current range are pro-; Erasing a track from your ITS playlist; Playback from your ITS playlist; If there are no tracks from your playlist in the; Erasing a CD from your ITS playlist
5 Press BAND to return to the playback display. Note After data for 100 discs has been stored in mem-ory, data for a new disc will overwrite the oldestone. Playback from your ITS playlist ITS play lets you listen to the tracks that youhave entered into your ITS playlist. When youturn on ITS play, tr...
Page 53 - Displaying disc titles; Selecting discs from the disc title list; Press LIST to switch to the disc title list; No Disc; Using CD TEXT functions
Entering disc titles Use the disc title input feature to store up to100 CD titles (with ITS playlist) into the multi-CD player. Each title can be up to 10 charac-ters long.For details concerning operation, refer to En- tering disc titles on page 16. ! Titles remain in memory, even after thedisc has ...
Page 54 - DVD Player; VCD; Selecting a disc; During DVD video or Video CD playback
DVD Player Basic Operations You can use this unit to control a DVD player ormulti-DVD player, which is sold separately. For details concerning operation, refer to theDVD player ’ s or multi-DVD player ’ s operation manual. This section provides information onDVD operations with this unit which diffe...
Page 56 - TV tuner
TV tuner Basic Operations You can use this unit to control a TV tuner,which is sold separately. For details concerning operation, refer to theTV tuner ’ s operation manual. This section pro- vides information on TV operations with thisunit which differs from that described in theTV tuner ’ s operati...
Page 57 - is
Storing the strongest broadcaststations sequentially 1 Press MULTI-CONTROL to display the main menu.FUNCTION , AUDIO and ENTERTAINMENT appear on the display. 2 Use MULTI-CONTROL and select FUNCTION to display BSSM. Turn to change the menu option; press to se-lect. # You can also select the function ...
Page 58 - Troubleshooting; iPod
Troubleshooting Symptom Cause Action iPod doesn ’ t operate cor-rectly. Cables are incor-rectly connected. Disconnect thecable from iPod.Once iPod mainmenu is displayed,connect the cableagain.Reset the iPod. Understanding errormessages When you contact your dealer or your nearestPioneer Service Cent...
Page 59 - Dual Discs
! Do not insert anything other than a CD intothe CD loading slot. ! Do not use cracked, chipped, warped, orotherwise damaged discs as they may da-mage the player. ! Unfinalized CD-R/CD-RW disc playback isnot possible. ! Do not touch the recorded surface of thediscs. ! Store discs in their cases when...
Page 60 - Example of a hierarchy; : Compressed audio file; Compressed audio compatibility; WMA; About handling the iPod; For details, refer to the iPod; About iPod settings
Example of a hierarchy : Folder : Compressed audio file 1 2 3 4 5 6 Level 1 Level 2 Level 3 Level 4 ! This unit assigns folder numbers. The usercannot assign folder numbers. ! Folder hierarchy is allowed up to eight tiers.However, practical hierarchy of folder isless than two tiers. ! Up to 99 folde...
Page 61 - Specifications; General; Audio; CD player
Specifications General Power source ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... Negative typeMax. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ..................... 1...
Page 62 - Afin d; Avant de commencer; Table des matières
Nous vous remercions d ’ avoir acheté cet appareil Pioneer. Afin d ’ utiliser votre appareil correctement, veuillez lire ce mode d ’ emploi entière- ment. Après avoir lu ce mode d ’ emploi, conser vez-le dans en endroit sûr pour pouvoir vous y référer ultérieurement. Avant de commencer Pour le modèl...
Page 63 - Accessoires disponibles; Français
– Mise en service ou hors service del ’ entrée auxiliaire 89 – Mise en service ou hors service del ’ atténuateur de luminosité 90 – Réglage de la luminosité 90 – Réglage de la sortie arrière et ducontrôleur de haut-parleur d ’ extrêmes graves 90 – Commutation de la coupure/atténuation du son 90 – Mi...
Page 64 - Informations complémentaires
– Introduction aux opérationsavancées 108 – Connexion d ’ un téléphone cellulaire 109 – Déconnexion d ’ un téléphone cellulaire 110 – Enregistrement d ’ un téléphone cellulaire connecté 110 – Suppression d ’ un téléphone enregistré 110 – Connexion à un téléphone cellulaireenregistré 111 – Utilisatio...
Page 65 - PRÉCAUTION; Quelques mots sur WMA
Pour le modèle canadien Cet appareil numérique de la classe B estconforme à la norme NMB-003 du Canada. Quelques mots sur cet appareil Les fréquences du syntoniseur de cet appareilsont attribuées pour une utilisation en Amé-rique du Nord. Son utilisation dans d ’ autres régions peut se traduire par ...
Page 66 - Visitez notre site Web; assurance en
! iPod est une marque commerciale deApple Computer, Inc. déposée aux États-Unis et dans d ’ autres pays. ! Cet appareil prend en charge uniquementun iPod avec Dock Connector. ! Il ne supporte pas les version du logicielantérieures à la mise à jour 2004-10-20.Consultez votre revendeur agréé Pioneer l...
Page 67 - Téléchargez les modes d; Protection de l; Mise en ser vice ou hors ser vice du; Détacher la face avant; Mode inverse
3 Téléchargez les modes d ’ emploi, commandez les catalogues des produits, recherchez denouveaux produits, et bien plus. Protection de l ’ appareil contre le vol La face avant peut être enlevée pour découra-ger les vols. ! Si vous ne retirez pas la face avant de l ’ ap- pareil central dans les cinq ...
Page 68 - Installation de la pile; ATTENTION; Utilisez seulement une pile au lithium; Utilisation de la télécommande
Mode démonstration des fonctions La démonstration des fonctions démarre auto-matiquement quand l ’ alimentation de cet ap- pareil est coupée alors que le contactd ’ allumage est en position ACC ou ON. Ap- puyer sur DISPLAY pendant le fonctionnement du mode démonstration des fonctions annulece mode. ...
Page 69 - Appareil central; Utilisation de l
Description de l ’ appareil Appareil central 1 Touche SOURCE Cet appareil est mis en service en sélection-nant une source. Appuyez sur cette touchepour parcourir les différentes sources dispo-nibles. 2 MULTI-CONTROL Déplacez ce bouton pour exécuter lescommandes d ’ accord manuel, avance ra- pide, re...
Page 70 - tion de la touche PGM
a Touches VOLUME Appuyez sur ces touches pour augmenterou diminuer le niveau sonore. b Touche FUNCTION Appuyez sur cette touche pour choisir desfonctions. c Joystick Déplacez ce bouton pour exécuter lescommandes d ’ accord manuel, avance ra- pide, retour rapide et recherche de plagemusicale. Utilisé...
Page 71 - Opérations de base; Mise en service, mise hors service; Mise en service de l; Choix d; appareil; Remarques; Réglage du volume
Opérations de base Mise en service, mise hors service Mise en service de l ’ appareil % Appuyez sur SOURCE pour mettre en service l ’ appareil. Mise hors tension de l ’ appareil % Maintenez la pression sur SOURCE jus- qu ’ à ce que l ’ appareil soit mis hors tension. Choix d ’ une source Vous pouvez...
Page 72 - Syntoniseur
Syntoniseur Opérations de base 6 6 6 1 1 1 1 2 2 2 2 4 4 4 4 5 5 5 5 3 3 3 1 Indicateur de gamme 2 Indicateur de stéréo ( 5 ) Il signale que la station sélectionnée émet enstéréo. 3 Indicateur LOC Il indique quand l ’ accord automatique sur une station locale est en service. 4 Indicateur de numéro d...
Page 73 - Accord sur les signaux puissants
Utilisation de la télécommande % Lorsque se présente une fréquence que vous désirez mettre en mémoire, mainte-nez la pression sur une des touches de pré-sélection 1 à 6 jusqu ’ à ce que le numéro de la présélection cesse de clignoter. Le nombre sur lequel vous avez appuyé cli-gnote sur l ’ indicateu...
Page 74 - Lecteur de CD intégré; est affiché au lieu de la
2 Appuyez sur MULTI-CONTROL pour mettre en service l ’ accord automatique sur les stations locales. # Pour mettre l ’ accord automatique sur les sta- tions locales hors service, appuyez à nouveau sur MULTI-CONTROL . 3 Poussez MULTI-CONTROL vers la gau- che ou vers la droite pour régler la sensibi-li...
Page 75 - La lecture commence automatiquement.; Assurez-vous de mettre le côté étiquette; Fermez la face avant.
Fente de chargement des disques Touche EJECT # Pour éviter un mauvais fonctionnement, assu- rez-vous qu ’ aucun objet métallique n ’ entre en contact avec les broches quand la face avant estouverte. 2 Insérez un CD (CD-ROM) dans le loge- ment pour le disque. La lecture commence automatiquement. # As...
Page 77 - Sélection; Pause de la lecture; tionner Pause dans le menu des fonctions.
# Lors de la lecture d ’ un disque d ’ audio compressée, l ’ exécution d ’ une recherche de plage ou d ’ une avance/d ’ un retour rapide pen- dant Track repeat (répétition de plage) change l ’ étendue de répétition en répétition de dossier. # Quand Folder repeat (répétition de dossier) est sélection...
Page 78 - Saisie des titres de disque
Recherche toutes les 10 plagessur le disque ou dossier en cours Vous pouvez choisir entre les méthodes re-cherche rapide avant, recherche rapide arrièreet recherche toutes les 10 plages. Sélectionner Rough search vous permet d ’ effectuer une re- cherche toutes les 10 plages. 1 Utilisez MULTI-CONTRO...
Page 79 - Pour un CD avec un titre saisi
! Si vous connectez à l ’ appareil un lecteur de CD à chargeur qui ne supporte pas la saisiede titres, vous ne pouvez pas utiliser l ’ appareil pour entrer des titres. Affichage d ’ informations textuelles sur le disque % Appuyez sur DISPLAY pour choisir l ’ in- formation textuelle désirée. Pour un ...
Page 80 - iPod est connecté à cet appareil,
1 Appuyez sur LIST pour passer en mode liste des noms de fichiers. Les noms des fichiers et des dossiers appa-raissent sur l ’ afficheur. 2 Utilisez MULTI-CONTROL pour sélec- tionner le nom de fichier (ou nom de dos-sier) désiré. Tournez pour changer de nom de fichier ou dedossier ; appuyez pour lir...
Page 82 - Répétition de la lecture; Remarque; Pause d
Introduction aux opérationsavancées 1 Appuyez sur MULTI-CONTROL pour affi- cher le menu principal.FUNCTION , AUDIO et ENTERTAINMENT ap- paraissent sur l ’ écran. 2 Utilisez MULTI-CONTROL pour choisir FUNCTION. Tournez pour changer l ’ option de menu, ap- puyez pour la sélectionner.Le nom de la fonct...
Page 83 - Réglages sonores; Introduction aux réglages sonores
2 Appuyez sur MULTI-CONTROL pour ac- tiver la pause. La lecture de la plage en cours se met enpause. # Appuyez à nouveau sur MULTI-CONTROL pour mettre la pause hors service. Réglages sonores Introduction aux réglages sonores 1 1 1 1 Affichage des réglages sonoresIl indique l ’ état des réglages sono...
Page 84 - Rappel d; Réglage des courbes d
# Si vous n ’ utilisez pas de fonctions excepté 50Hz dans un délai d ’ environ 30 secondes, l ’ é- cran revient automatiquement à l ’ affichage ordi- naire. Réglage de l ’ équilibre sonore Vous pouvez modifier l ’ équilibre avant-arrière/ droite-gauche afin d ’ obtenir un confort d ’ é- coute idéal ...
Page 85 - Rappel
Si la courbe de l ’ égaliseur a été sélectionnée précédemment, la courbe de cet égaliseur sé-lectionné s ’ affichera alors à la place de Powerful . 2 Poussez MULTI-CONTROL vers la gau- che ou vers la droite pour choisir unecourbe d ’ égalisation. Chaque fois que vous poussez MULTI-CONTROL vers la ga...
Page 86 - extrêmes graves; Réglages du haut-parleur d
# Appuyez à nouveau sur MULTI-CONTROL pour mettre hors service la correction physiolo-gique. 3 Poussez MULTI-CONTROL vers la gau- che ou vers la droite pour sélectionner leniveau désiré. Chaque fois que vous poussez MULTI-CONTROL vers la gauche ou vers la droite, un niveau est sélectionné dans l ’ o...
Page 87 - Accentuation des graves; Utilisation du filtre passe-haut
Accentuation des graves La fonction accentuation des graves aug-mente le niveau des graves pour les fréquen-ces inférieures à 100 Hz. L ’ augmentation du niveau des graves accentue le son des graveset rend la sonorité globale plus puissante.Quand cette fonction est utilisée avec le haut-parleur d ’ ...
Page 88 - Réglages initiaux; Ajustement des réglages initiaux; Vous pouvez aussi effectuer cette opération; Tournez
! Le syntoniseur XM et le syntoniseur SIRIUSsont réglés automatiquement sur le mêmevolume. ! La source extérieure 1 et la source extérieure 2sont automatiquement réglées sur le mêmevolume. Réglages initiaux Ajustement des réglages initiaux À partir des réglages initiaux, vous pouvez per-sonnaliser d...
Page 89 - Utilisation de la source AUX
# Vous pouvez aussi sélectionner la fonction en appuyant sur FUNCTION de la télécommande. # BT AUDIO et Pin code input peuvent être sé- lectionnés seulement quand un adaptateur Blue-tooth (par exemple, CD-BTB100) est connecté àcet appareil. # Appuyez sur BAND pour abandonner les ré- glages initiaux....
Page 91 - Basculement du mode inverse; Activation de la source
! Le son émis par l ’ appareil redevient normal quand la coupure ou atténuation du sonest annulée. 1 Utilisez MULTI-CONTROL pour choisir Mute. 2 Appuyez sur MULTI-CONTROL pour bas- culer entre coupure et atténuation du sonpour le téléphone. Appuyer sur MULTI-CONTROL fait basculer al- ternativement e...
Page 92 - , mais vous pouvez le modifier
1 Utilisez MULTI-CONTROL pour choisir BT AUDIO. 2 Appuyez sur MULTI-CONTROL pour mettre la source BT Audio en service. # Pour mettre la source BT Audio hors service, appuyez à nouveau sur MULTI-CONTROL . Saisie du code PIN pour laconnexion sans fil Bluetooth Pour connecter votre téléphone cellulaire...
Page 93 - Autres fonctions; Lors de la connexion d; AUX; affichage de l
Autres fonctions Utilisation de la source AUX Cet appareil peut contrôler un maximum dedeux équipements auxiliaires tels qu ’ un ma- gnétoscope ou des appareils portables (ven-dus séparément). Lorsque des équipementsauxiliaires sont connectés, ils sont automati-quement lus en tant que sources AUX et...
Page 94 - Utilisation de la touche PGM
Utilisation des diversaffichages divertissants Vous pouvez profiter des affichages divertis-sants tout en écoutant chaque source sonore. 1 Appuyez sur MULTI-CONTROL pour affi- cher le menu principal.FUNCTION , AUDIO et ENTERTAINMENT ap- paraissent sur l ’ écran. 2 Utilisez MULTI-CONTROL pour choisir...
Page 95 - Sélection directe d
Lecture de plages musicalessur le lecteur audio portableUSB/la mémoire USB Opérations de base Vous pouvez utiliser cet appareil pour contrôlerun adaptateur USB, vendu séparément. Pour avoir des détails sur ce mode de fonc-tionnement, reportez-vous au mode d ’ emploi de l ’ adaptateur USB. Cette sect...
Page 96 - Fonction et utilisation; Le fonctionnement de; un fichier audio; utilisation est la même que celle du lecteur
# Appuyez sur BAND pour revenir à l ’ affichage des conditions de lecture. # Si vous ne réglez aucun paramètre des fonc- tions pendant environ 30 secondes, l ’ écran re- vient automatiquement à l ’ affichage ordinaire. Fonction et utilisation Le fonctionnement de Play mode , Random mode , Scan mode ...
Page 97 - Syntoniseur XM
Syntoniseur XM Opérations de base Vous pouvez utiliser cet appareil pour comman-der un syntoniseur satellite numérique XM(GEX-P920XM), vendu séparément. Pour avoir des détails sur ce mode de fonc-tionnement, reportez-vous aux modes d ’ em- ploi du syntoniseur XM. Cette section donnedes informations ...
Page 99 - Affichage de l; Appuyez sur SOURCE pour choisir
Remarque Vous pouvez aussi sélectionner le réglage sélec-tion du canal XM dans le menu qui s ’ affiche en utilisant MULTI-CONTROL . Affichage de l ’ ID de la radio Réglage de la sélection du numérode canal Si vous sélectionnez CH 000 , le code ID est affiché. % Poussez MULTI-CONTROL vers la gau- che...
Page 100 - Changement de l
2 Appuyez sur BAND pour choisir une gamme SIRIUS. Appuyez sur BAND jusqu ’ à ce que la gamme SIRIUS désirée, SR-1 , SR-2 ou SR-3 soit affichée. 3 Pour effectuer l ’ accord, poussez MULTI-CONTROL vers la gauche ou vers ladroite. Les canaux augmentent ou diminuent pas parpas. Les canaux qui ne peuvent...
Page 101 - Vous pouvez aussi rappeler les stations mises; Sélection d; Pour revenir à
Changer le mode de défilement Vous pouvez choisir le mode de défilement,défilement continu ou défilement une seulefois. % Appuyez de façon prolongée sur DISPLAY pour changer le paramétrage dudéfilement. Appuyer de façon prolongée sur DISPLAY sé- lectionne le mode de défilement dans l ’ ordre suivant...
Page 103 - Appuyez de façon prolongée sur; Si vous sélectionnez; Audio Bluetooth
3 Appuyez de façon prolongée sur MULTI-CONTROL pour passer sur cette sta-tion et écouter le match. Remarques ! Si vous n ’ avez effectué aucune sélection d ’ é- quipes, NOT SET s ’ affiche. ! Quand aucun match impliquant vos équipesfavorites n ’ est en cours, NO GAME est affiché. Affichage de l ’ ID...
Page 105 - affiche. Cet appareil est; La lecture de la plage en cours s
# Si vous n ’ utilisez pas de fonctions excepté Connection open et Disconnect audio dans un délai d ’ environ 30 secondes, l ’ écran revient auto- matiquement à l ’ affichage ordinaire. Connexion d ’ un lecteur audio Bluetooth 1 Utilisez MULTI-CONTROL pour sélec- tionner Connection open dans le menu...
Page 106 - Téléphone Bluetooth; emploi de
Affichage de la version dusystème pour les réparations 1 Utilisez MULTI-CONTROL pour sélec- tionner Device info. dans le menu des fonc-tions. Le nom d ’ appareil ( Pioneer BT Unit ) de cet appareil apparaît sur l ’ afficheur. 2 Poussez MULTI-CONTROL vers le bas pour passer à la version du système de...
Page 107 - Appuyez sur SOURCE pour choisir le té-; Connexion
Indique la force du signal du téléphone cellu-laire. ! L ’ indicateur de niveau du signal peut af- ficher une valeur différente du niveau designal effectif. 3 Indicateur du numéro d ’ utilisateur Indique le numéro d ’ enregistrement du télé- phone cellulaire. 4 Indicateur de force de la batterieIndi...
Page 108 - Prise d; Les noms des fonctions qui s
Exécution d ’ un appel Reconnaissance vocale 1 Appuyez sur BAND jusqu ’ à ce que Voice dial apparaisse sur l ’ afficheur. Voice dial apparaît sur l ’ afficheur. Quand Voice dial ON est affiché, la fonction recon- naissance vocale est prête. # Si votre téléphone cellulaire ne dispose pas de la foncti...
Page 109 - Saisie du; Utilisation d
Si le téléphone est connecté mais non en-core enregistré Disconnect phone (déconnecter le téléphone) — Set phone (enregistrer le téléphone) — Delete phone (supprimer le téléphone) — PH.B.Transfer (transfert d ’ annuaire) — Number dial (appel par composition du nu- méro) — Refuse calls (réglage du re...
Page 112 - Modification du nom d; Appel d; Modification des numéros de téléphone
2 Poussez MULTI-CONTROL vers la gau- che ou vers la droite pour sélectionner lapremière lettre du nom que vous recher-chez. 3 Appuyez sur MULTI-CONTROL pour affi- cher les entrées. L ’ écran affiche les trois premières entrées de l ’ Annuaire commençant par cette lettre (par exemple “ Ben ” , “ Bria...
Page 114 - Annuaire ou l; Exécution d
# Si aucun numéro de téléphone n ’ a été stocké dans la liste sélectionnée, No data s ’ affiche. 2 Tournez MULTI-CONTROL pour sélec- tionner un numéro de téléphone. Tournez MULTI-CONTROL pour changer les numéros de téléphone enregistrés dans laliste. # Si le numéro est déjà dans l ’ Annuaire, le nom...
Page 115 - Effacement de la mémoire; Réglage du rejet automatique
4 Quand vous avez terminé la saisie du numéro, appuyez sur MULTI-CONTROL. La confirmation de l ’ appel s ’ affiche. 5 Appuyez à nouveau sur MULTI-CONTROL pour effectuer un appel. 6 Pour terminer l ’ appel, poussez MULTI-CONTROL vers le bas. Effacement de la mémoire 1 Utilisez MULTI-CONTROL pour séle...
Page 116 - Le nom d; Lecteur de CD à chargeur; emploi sont prises en compte par
2 Appuyez sur MULTI-CONTROL pour mettre l ’ annulation d ’ écho en service. # Appuyez à nouveau sur MULTI-CONTROL pour mettre l ’ annulation d ’ écho hors service. Affichage de l ’ adresse BD (Bluetooth Device) 1 Utilisez MULTI-CONTROL pour sélec- tionner Device info. dans le menu des fonc-tions. Le...
Page 118 - Utilisation des listes ITS; Création d; venance d
Nom de la fonction Utilisation Play mode Reportez-vous à la page 76, Sélection d ’ une étendue de ré- pétition de lecture . Mais les étendues de répéti-tion de la lecture que vouspouvez sélectionner diffèrentde celles du lecteur de CD in-tégré. Les étendues de répéti-tion de la lecture du lecteurdu ...
Page 119 - Écoute des plages; Suppression d; ITS empty; Suppression d
3 Sélectionnez la plage désirée en pous- sant MULTI-CONTROL vers la gauche ouvers la droite. 4 Poussez MULTI-CONTROL vers le haut pour mémoriser la plage en cours de lec-ture dans la liste de lecture.Memory complete est affiché et la sélection en cours de lecture est ajoutée à votre liste delecture....
Page 120 - Utilisation des fonctions CD TEXT; Affichage d
3 Poussez MULTI-CONTROL vers le bas pour effacer toutes les plages du CD encours de lecture de votre liste ITS. Toutes les plages du CD en cours de lecturesont effacées de la liste de lecture et Memory deleted est affiché. 4 Appuyez sur BAND pour revenir à l ’ affi- chage des conditions de lecture. ...
Page 121 - Lecteur DVD
Lecteur DVD Opérations de base Vous pouvez utiliser cet appareil pour comman-der un lecteur de DVD ou un lecteur de DVD àchargeur, vendu séparément. Pour des détails concernant leur utilisation, re-portez-vous aux modes d ’ emploi du lecteur de DVD ou du lecteur de DVD à chargeur. Cettesection donne...
Page 122 - utilisation de
Pendant la lecture d ’ un DVD vidéo ou d ’ un CD Vidéo Play mode (répétition de la lecture) — Pause (pause) Pendant la lecture d ’ un CD Play mode (répétition de la lecture) — Random mode (lecture aléatoire) — Scan mode (examen du disque) — Pause (pause) — ITS play mode (lecture ITS) — ITS memo (sai...
Page 123 - Syntoniseur TV; Pour choisir le syntoniseur TV, appuyez
! En lecture de CD ou CD vidéo, si vous recher-chez une plage musicale ou commandez uneavance rapide ou un retour rapide pendantune répétition Track repeat , l ’ étendue de ré- pétition changera en Disc repeat . ! Lors de la lecture d ’ audio compressée, si vous choisissez un autre dossier pendant l...
Page 124 - émission
# Si vous poussez MULTI-CONTROL vers la gau- che ou vers la droite et maintenez la pression,vous pouvez sauter des canaux. L ’ accord automa- tique démarre dès que vous relâchez MULTI-CONTROL . Mise en mémoire et rappel desstations d ’ émission Vous pouvez facilement mettre en mémoirejusqu ’ à 12 st...
Page 126 - entretien agréé par Pioneer le plus
Dépannage Symptôme Causes possi-bles Action corrective L ’ iPod ne fonc- tionne pas cor-rectement. Les câbles nesont pas connec-tés correcte-ment. Déconnectez lecâble de l ’ iPod. Quand le menuprincipal de l ’ iPod est affiché, recon-nectez le câble.Réinitialisez l ’ iPod. Signification des messages...
Page 128 - Fichiers audio compressés; Exemple de hiérarchie
Fichiers audio compressés ! Selon la version de Windows Media Playerutilisée pour encoder les fichiers WMA, lesnoms d ’ album et les autres informations textuelles peuvent ne pas s ’ afficher correc- tement. ! Cet appareil peut ne pas fonctionner cor-rectement selon le logiciel (ou la version dulogi...
Page 130 - Caractéristiques techniques; Généralités
Caractéristiques techniques Généralités Alimentation .............................. 14,4 V DC (10,8 V à 15,1 V acceptable) Mise à la masse ....................... Pôle négatifConsommation maximale ... 10,0 ADimensions (L × H × P) : DIN Châssis ..................... 178 × 50 × 162 mmPanneau avant ......
Page 131 - PIONEER CORPORATION
PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KUTOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, BelgiumTEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE ...