Page 2 - After you have finished reading the instructions, keep this man-; Contents
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operateyour model properly. After you have finished reading the instructions, keep this man- ual in a safe place for future reference. Before You Start Information to User 5 For Canadi...
Page 3 - English
– Recalling equalizer curves 24 – Adjusting equalizer curves 24 – Fine-adjusting equalizer curve 24 Adjusting loudness 25 Using subwoofer output 25 – Adjusting subwoofer settings 25 Using the high pass filter 26 Boosting the bass 26 Adjusting source levels 26 Initial Settings Adjusting initial setti...
Page 5 - Information to User; For Canadian model; WARNING; CAUTION; About WMA
Information to User Alteration or modifications carried out withoutappropriate authorization may invalidate theuser ’ s right to operate the equipment. For Canadian model This Class B digital apparatus complies withCanadian ICES-003. About this unit The tuner frequencies on this unit are allo-cated ...
Page 7 - Visit our website; Visit us at the following site:; In case of trouble; The front panel can be detached to deter theft.; Removing the front panel; Press OPEN to open the front panel.
After-sales service forPioneer products Please contact the dealer or distributor fromwhere you purchased this unit for after-salesservice (including warranty conditions) or anyother information. In case the necessary infor-mation is not available, please contact thecompanies listed below:Please do n...
Page 8 - Attaching the front panel; Reattach the front panel by holding it; About the demo mode; This unit features the feature demo mode.; Feature demo mode; Installing the battery; Using the remote control
Attaching the front panel % Reattach the front panel by holding it upright to the unit and clipping it securelyinto the mounting hooks. About the demo mode This unit features the feature demo mode. Important The red lead (ACC) of this unit should be con-nected to a terminal coupled with ignition swi...
Page 9 - Head unit; OPEN button; Operating this unit
What ’ s What Head unit 1 SRC/OFF button This unit is turned on by selecting a source.Press to cycle through all the availablesources. 2 DISP/BACK/SCROLL button Press to select different displays.Press and hold to scroll the text information.Press to return to the previous display whenoperating the ...
Page 10 - Remote control; Press to increase or decrease the volume.; Display indication; Appears when operating list function.; b c
b BAND/ESC button Press to select among three FM bands andone AM band.Press to return to the ordinary display whenoperating menu. Remote control Operation is the same as when using the but-tons on the head unit. c VOLUME buttons Press to increase or decrease the volume. d MUTE button Press to turn o...
Page 11 - Basic Operations; Turning the unit on; Selecting a source
8 (song) indicator Appears when the track (song) name is dis-played on the main display section.Appears when song search refinement oniPod browsing function is operated. 9 LOC indicator Appears when local seek tuning is on. a 5 (stereo) indicator Appears when the selected frequency isbeing broadcast...
Page 12 - Adjusting the volume; Use MULTI-CONTROL to adjust the; Tuner; Select a band; Seek tuning
! Charging the portable audio player usingcar ’ s DC power source while connecting it to AUX input may generate noise. In this case,stop charging. ! External unit refers to a Pioneer product (suchas ones available in the future) that, althoughincompatible as a source, enables control ofbasic functio...
Page 13 - Tuning in strong signals; The
Introduction of advancedoperations 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option. Press to se-lect. 3 Turn MULTI-CONTROL to select the function.BSM (best stations memory) — LOCAL (local seek tuning) Notes ! You can also select ...
Page 14 - For title entered CD
Built-in CD Player Basic Operations % Open the front panel Press OPEN . Disc loading slot appears. Disc loading slot EJECT button # When loading a disc, face the label side of a disc up. # To avoid a malfunction, make sure that no metal objects come into contact with the term-inals when the front pa...
Page 15 - Press LIST to switch to the track title list
For WAV discs Play time — folder name and file name — sam- pling frequency and play time Notes ! You can scroll to the left of the title by pressingand holding DISP . ! Audio CD that contains certain informationsuch as text and/or number is CD TEXT. ! If specific information is not recorded on adisc...
Page 16 - Selecting a repeat play range; Playing tracks in random order; Tracks play in a random order.; Scanning folders and tracks; The first 10 seconds of each track is played.; Pausing playback; Playback of the current track pauses.
Introduction of advancedoperations 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option. Press to se-lect. 3 Turn MULTI-CONTROL to select the function.REPEAT (repeat play) — RANDOM (random play) — SCAN (scan play) — PAUSE (pause) — SO...
Page 17 - Using Sound Retriever; Using disc title functions; Entering disc titles
Note You can also turn this function on or off in themenu that appears by using MULTI-CONTROL . Using Sound Retriever Sound Retriever function automatically en-hances compressed audio and restores richsound. % Press S.Rtrv/SAT MODE repeatedly to select the desired setting.OFF (off) — 1 — 2 # 2 is mo...
Page 18 - For WAV discs; Selecting files from the
Playing songs on USB portableaudio player/USB memory For details about the supported device, refer toPortable audio player compatibility on page 6. Basic Operations % Select a folder Push MULTI-CONTROL up or down. % Fast forward or reverse Push and hold MULTI-CONTROL left or right for about one seco...
Page 19 - Function and operation; and
2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option. Press to se-lect. 3 Turn MULTI-CONTROL to select the function.REPEAT (repeat play) — RANDOM (random play) — SCAN (scan play) — PAUSE (pause) — SOUND RETRIEVER (advanced sound retrie- ver) Function and operation REPEAT , RANDOM ,...
Page 20 - Playing songs on iPod; compatibility on page 6.; Browsing for a song
Playing songs on iPod For details about the supported iPod, refer toiPod ® compatibility on page 6. Basic Operations % Fast forward or reverse Push and hold MULTI-CONTROL left or right for about one second and release. % Select a track (chapter) Push MULTI-CONTROL left or right. Notes ! When using a...
Page 21 - Turn to change the setting.
# If the characters recorded on the iPod are not compatible with this unit, those characters arenot displayed. Notes ! You can scroll the text information to the leftby pressing and holding DISP . ! When Ever Scroll is set to ON at the initial set-ting, text information scrolls continuously inthe di...
Page 22 - Changing audiobook speed
! ALBUMS – Play back songs from a ran- domly selected album in order. ! OFF – Cancel random play. Playing all songs in a randomorder (shuffle all) % Press iPod to turn shuffle all on. All songs on the iPod play randomly. # To turn shuffle all off, set SHUFFLE in the FUNCTION menu to off. Note You ca...
Page 23 - Using balance adjustment; Using the equalizer
Introduction of audioadjustments 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to se-lect. 3 Turn MULTI-CONTROL to select the audio function. Turn MULTI-CONTROL to switch between the audio functions in the following order. ...
Page 24 - Recalling equalizer curves; Adjusting equalizer curves; Fine-adjusting equalizer curve; Center frequency; Audio Adjustments
Recalling equalizer curves There are six stored equalizer curves whichyou can easily recall at any time. Here is a listof the equalizer curves. Display Equalizer curve POWERFUL Powerful NATURAL Natural VOCAL Vocal CUSTOM Custom FLAT Flat SUPER BASS Super bass ! CUSTOM is an adjusted equalizer curve ...
Page 25 - Q factor; Adjusting loudness; Adjusting subwoofer settings; Cut off frequency
Q factor 2N — 1N — 1W — 2W # You can also perform the same operations by pushing MULTI-CONTROL up or down. Note A separate CUSTOM curve can be created for each source. (The built-in CD player and themulti-CD player are set to the same equalizer ad-justment setting automatically.) If you make ad-just...
Page 26 - Using the high pass filter; Adjusting source levels
# You can also perform the same operations by pushing MULTI-CONTROL up or down. Note You can also switch to this setting mode in themenu that appears by using MULTI-CONTROL . Using the high pass filter When you do not want low sounds from thesubwoofer output frequency range to playfrom the front or ...
Page 27 - Using the AUX source
Adjusting initial settings 1 Press SRC and hold until the unit turns off. 2 Press MULTI-CONTROL and hold until CLOCK SET appears in the display. 3 Turn MULTI-CONTROL to select one of the initial settings.CLOCK SET (clock) — WARNING TONE (warn- ing tone) — AUX1 (auxiliary input 1) — AUX2 (auxiliary i...
Page 28 - Switching the feature demo; Initial Settings
2 Press MULTI-CONTROL to turn dimmer on. # To turn dimmer off, press MULTI-CONTROL again. Setting the rear output andsubwoofer controller This unit ’ s rear output (rear speaker leads out- put) can be used for full-range speaker ( FULL ) or subwoofer ( SUB W ) connection. If you switch the rear outp...
Page 29 - System version
Switching the Ever Scroll When Ever Scroll is set to ON, recorded text in-formation scrolls continuously in the display.Set to OFF if you prefer the information toscroll just once. 1 Use MULTI-CONTROL to select EVER SCROLL. 2 Press MULTI-CONTROL to turn the Ever Scroll on. # To turn the Ever Scroll ...
Page 30 - About; Selecting AUX as the source; Setting the AUX title; tering disc titles; Sound muting
Using the AUX source Up to two auxiliary devices such as VCR orportable devices (sold separately) can be con-nected to this unit. When connected, auxiliarydevices are automatically read as AUX sourcesand assigned to AUX1 or AUX2 . The relation- ship between AUX1 and AUX2 sources is ex- plained below...
Page 31 - Using the external unit; Basic operation; Other Functions
The sound is turned off, MUTE is displayed and no audio adjustments, except volume con-trol, are possible. Operation returns to normalwhen the phone connection or the voice gui-dance is ended. Using the external unit External unit refers to a Pioneer product (suchas ones available in the future) tha...
Page 32 - Displaying text information on iPod; Available accessories
Playing songs on iPod Basic operation You can use this unit to control an interfaceadapter for iPod, which is sold separately. % Fast forward or reverse Push and hold MULTI-CONTROL left or right for about one second and release. % Select a track Push MULTI-CONTROL left or right. Notes ! Read the pre...
Page 33 - Press RDM repeatedly to select the de-; Bluetooth Audio; Fast forward or reverse; Press MULTI-CONTROL to display the
Playing songs in a randomorder (shuffle) % Press RDM repeatedly to select the de- sired setting. ! SONGS – Play back songs in the selected list in random order. ! ALBUMS – Play back songs from a ran- domly selected album in order. ! OFF – Cancel random play. # To turn shuffle off, press RDM again. N...
Page 34 - is displayed. This unit is; Stopping playback; is displayed. The Bluetooth
3 Turn MULTI-CONTROL to select the function.CONNECTION OPEN (connection open) — DISCONNECT AUDIO (disconnect audio) — PLAY (Play) — STOP (Stop) — PAUSE (pause) — DEVICE INFO (device information) PAUSE is the same as that of the built-in CD player. (Refer to Pausing playback on page 16.) # You can al...
Page 35 - Bluetooth Telephone; Setting up for hands-free phoning; Connecting a cellular phone
Displaying BD (BluetoothDevice) address 1 Use MULTI-CONTROL to select DEVICE INFO in the function menu. The device name ( PIONEER BT UNIT ) of this unit appears in the display. 2 Press MULTI-CONTROL to display the setting mode. 3 Use MULTI-CONTROL to select the de- sired setting. Turn to change the ...
Page 36 - Making a phone call; Voice recognition; Taking a phone call; Answering or rejecting an incoming call; Operating a call waiting; If not connected yet
Making a phone call Voice recognition 1 Press BAND/ESC and hold until VOICE DIAL appears in the display.VOICE DIAL appears in the display. When VOICE DIAL ON is displayed, voice recogni- tion function is now ready. # If your cellular phone does not feature voice recognition function, NO VOICE DIAL a...
Page 37 - Searching for available cellular phones; flashes and the unit is
! DISCONNECT (disconnect phone) ! SET PHONE (registering phone) ! CLEAR MEMORY (clear memory) ! NUMBER DIAL (call by entering number) If connected but not registered yet The following functions cannot be operated. ! SEARCH PHONE (search and connect) ! CONNECTION OPEN (connection open) ! CONNECT PHON...
Page 38 - Disconnecting a cellular phone; After disconnection is completed,; When registration is completed,; Deleting a registered phone; The phone being deleted is now on standby.
Disconnecting a cellular phone 1 Use MULTI-CONTROL to select DISCONNECT PHONE in the function menu. Device name of the connected phone appearsin the display. 2 Press MULTI-CONTROL to disconnect a cellular phone from this unit. After disconnection is completed, DISCONNECTED is displayed. Registering ...
Page 39 - Using the Phone Book; Transferring entries to the Phone Book
# You can also perform the same operations by pushing MULTI-CONTROL up or down. # If the assignment is empty, NO DATA is dis- played and operation is not possible. 4 Press MULTI-CONTROL to connect the selected cellular phone. While connecting, CONNECTING is displayed. After the connection is complet...
Page 40 - Using the Call History; Phone book; Call confirmation appears.; Clearing memory; Clearing memory is now on standby.
Using the Call History Important Be sure to park your vehicle and apply the park-ing brake when performing this operation. The 12 most recent calls made (dialled), re-ceived and missed, are stored in the Call His-tory. You can browse the Call History and callnumbers from it. 1 Press LIST to display ...
Page 41 - the data on the selected item is cleared,; XM tuner; s operation manuals. This section; Preset screen is displayed.
6 Press MULTI-CONTROL to clear the memory. While clearing, CLEARING is displayed. After the data on the selected item is cleared, CLEARED is displayed. Setting automatic rejecting 1 Use MULTI-CONTROL to select REFUSE CALLS in the function menu. 2 Press MULTI-CONTROL to turn auto- matic call rejectio...
Page 42 - Displaying the Radio ID; Channel number select setting; Switching the XM channel select mode; SIRIUS Satellite Radio tuner; Listening to SIRIUS Satellite Radio
2 Use MULTI-CONTROL to store the se- lected station in memory. Turn to change the preset number. Press andhold to store.The XM preset number you have selected willflash and then remain lit. The selected stationhas been stored in memory. 3 Use MULTI-CONTROL to select the de- sired station. Turn to ch...
Page 43 - Switching the SIRIUS display
% Select a channel. Push MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel num-ber continuously. # You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel categor y on the next page....
Page 44 - Selecting a channel in the channel; Using the Game Alert function; Selecting teams for Game Alert; Switching the Game Alert on or off
Selecting the SIRIUS channelselect mode You have two methods for selecting a channel:by number and by category. When selectingby number, channels in any category can beselected. Select by category to narrow yoursearch down to only channels in a particularcategory. % Press SAT MODE repeatedly to sele...
Page 45 - Displaying game information; Using CD TEXT functions; Displaying text information on disc
! If you do not operate the function withinabout 10 seconds, the display is automati-cally returned. Displaying game information If games of your selected teams are currentlyplaying, you can display information of thegames and tune to the broadcast channel.You can display information of the gameswhi...
Page 47 - Using ITS playlists; Creating a playlist with ITS programming; Playback from your ITS playlist
Using ITS playlists ITS (instant track selection) lets you make aplaylist of favorite tracks from the multi-CDplayer magazine. After you have added your fa-vorite tracks to the playlist, you can turn on ITSplay and play just those selections.You can use ITS to enter and play back up to99 tracks per ...
Page 48 - Erasing a CD from your ITS playlist; Displaying disc titles; Selecting discs from the disc title list; Turn to change the disc title. Press to play.; TV tuner; Press
Erasing a CD from your ITS playlist You can delete all tracks of a CD from your ITSplaylist if ITS play is off. 1 Play the CD that you want to delete. 2 Use MULTI-CONTROL to select ITS MEMORY in the function menu. 3 Press MULTI-CONTROL to display the setting mode. 4 Press MULTI-CONTROL to select DEL...
Page 50 - Error messages
Error messages When you contact your dealer or your nearestPioneer Service Center, be sure to have theerror message recorded. Built-in CD Player Message Cause Action ERROR-11, 12,17, 30 Dirty disc Clean disc. ERROR-11, 12,17, 30 Scratched disc Replace disc. ERROR-10, 11,12, 15, 17, 30,A0 Electrical ...
Page 51 - Store discs in their cases when not in use.
iPod Message Cause Action ERROR-19 Communicationfailure Disconnect thecable from iPod.Once iPod mainmenu is displayed,connect the cableagain.Reset the iPod. iPod failure Disconnect thecable from iPod.Once iPod mainmenu is displayed,connect the cableagain.Reset the iPod. N/A USB Old version ofiPod Up...
Page 52 - Dual Discs; WMA
Dual Discs ! Dual Discs are two-sided discs that have arecordable CD for audio on one side and arecordable DVD for video on the other. ! Since the CD side of Dual Discs is not phy-sically compatible with the general CDstandard, it may not be possible to play theCD side with this unit. ! Frequent loa...
Page 53 - File extensions must be used properly.; to
USB audio player/USB memory ! Do not leave the USB portable audioplayer/USB memory in direct sunlight forextended amounts of time. Extended expo-sure to direct sunlight can result in USBportable audio player/USB memory mal-function due to the resulting high tempera-ture. ! Do not leave the USB porta...
Page 54 - About handling the iPod; For details, refer to the iPod; About iPod settings; : Compressed audio file
iPod About handling the iPod ! Do not leave the iPod in direct sunlight forextended amounts of time. Extended expo-sure to direct sunlight can result in iPodmalfunction due to the resulting high tem-perature. ! Do not leave the iPod in a high tempera-ture. ! Connect directly the dock connector cable...
Page 55 - Specifications
Specifications General Power source ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... Negative typeMax. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ..................... 1...
Page 57 - Afin d; Français; Table des matières
Nous vous remercions d ’ avoir acheté cet appareil Pioneer. Afin d ’ utiliser votre appareil correctement, veuillez lire ce mode d ’ emploi entière- ment. Après avoir lu ce mode d ’ emploi, conser vez-le dans un endroit sûr pour pouvoir vous y référer ultérieurement. Avant de commencer Pour le modèl...
Page 60 - PRÉCAUTION; Quelques mots sur WMA
Pour le modèle canadien Cet appareil numérique de la classe B estconforme à la norme NMB-003 du Canada. Quelques mots sur cet appareil Les fréquences du syntoniseur de cet appareilsont attribuées pour une utilisation en Amé-rique du Nord. Son utilisation dans d ’ autres régions peut se traduire par ...
Page 62 - Retrait de la face avant
Visitez notre site Web Consultez notre site : http://www.pioneerelectronics.com 1 Enregistrez votre produit. Nous conserveronsles détails de votre achat dans nos fichierspour vous aider à faire référence à ces infor-mations pour une déclaration d ’ assurance en cas de perte ou de vol. 2 Recevez les ...
Page 63 - Installation de la pile; ATTENTION; Utilisation de la télécommande
Mode de démonstration des fonctions La démonstration des fonctions démarre auto-matiquement quand l ’ alimentation de cet ap- pareil est coupée alors que le contactd ’ allumage est en position ACC ou ON. Ap- puyez sur DISP pendant le fonctionnement du mode de démonstration des fonctions pourannuler ...
Page 64 - Appareil central; Touche OPEN; Utilisation de l
Description de l ’ appareil Appareil central 1 Touche SRC/OFF Cet appareil est mis en service en sélection-nant une source. Appuyez sur cette touchepour parcourir les différentes sources dispo-nibles. 2 Touche DISP/BACK/SCROLL Appuyez sur cette touche pour choisir un af-fichage différent.Appuyez de ...
Page 67 - Opérations de base; Mise en service, mise hors service; Mise en service de l; Choix d; appareil; Réglage du volume
Opérations de base Mise en service, mise hors service Mise en service de l ’ appareil % Appuyez sur SRC pour mettre en ser- vice l ’ appareil. Mise hors tension de l ’ appareil % Maintenez la pression sur OFF jusqu ’ à ce que l ’ appareil soit mis hors tension. Choix d ’ une source Vous pouvez sélec...
Page 68 - Syntoniseur
Syntoniseur Opérations de base % Sélection d ’ une bande Appuyez sur BAND/ESC . # La gamme peut être sélectionnée parmi FM1 , FM2 , FM3 ou AM . % Accord manuel (pas par pas) Poussez MULTI-CONTROL vers la gauche ou vers la droite. % Accord automatique Poussez MULTI-CONTROL vers la gauche ou vers la d...
Page 69 - Accord sur les signaux puissants; Lecteur de CD intégré
Mise en mémoire desfréquences les plus puissantes La fonction BSM (Mémoire des meilleures sta-tions) vous permet d ’ enregistrer automatique- ment les six fréquences d ’ émission les plus puissantes. 1 Utilisez MULTI-CONTROL pour sélec- tionner BSM dans le menu des fonctions. 2 Appuyez sur MULTI-CON...
Page 70 - Basculer entre les modes audio; Affichage d; Appuyez sur DISP pour choisir l
% Basculer entre les modes audio compression et CD-DA Appuyez sur BAND/ESC . # Cette opération n ’ est disponible que lors de la lecture de CD CD-EXTRA ou MIXED-MODE. # Si vous avez basculé entre la lecture d ’ audio compressé et celle de données audio (CD-DA), lalecture commence à la première plage...
Page 71 - choisir une pour la lire.; en choisir un pour le lire.; Tournez pour changer l
! Quand la fonction Ever Scroll est mise en ser-vice lors du réglage initial, les informationstextuelles défilent en permanence. Reportez-vous à la page 87, Mise en ser vice ou hors ser- vice de la fonction Ever Scroll (défilement per-manent) . Choix des plages musicales à partirde la liste des titr...
Page 72 - Sélection d; Pause de la lecture
Remarques ! Vous pouvez aussi sélectionner la fonction enappuyant sur FUNCTION de la télécom- mande. ! Appuyez sur BACK pour revenir à l ’ affichage précédent. ! Pour revenir au menu principal, appuyez defaçon prolongée sur BACK . ! Appuyez sur BAND/ESC pour revenir à l ’ affi- chage ordinaire. ! Si...
Page 73 - Utilisation du Sound Retriever; audio compressé et restaure un; Saisie des titres de disque; à 48 titres de CD dans
Remarque Vous pouvez aussi mettre cette fonction en ser-vice ou hors service dans le menu qui s ’ affiche en utilisant MULTI-CONTROL . Utilisation du Sound Retriever La fonction Sound Retriever améliore automa-tiquement l ’ audio compressé et restaure un son riche. % Appuyez de manière répétée sur S...
Page 74 - Pour des détails sur l; un fichier audio; Pour les disques WAV
Lecture de plages musicalessur le lecteur audio portableUSB/la mémoire USB Pour des détails sur l ’ appareil supporté, repor- tez-vous à la page 60, Compatibilité avec un lec-teur audio portable. Opérations de base % Sélection d ’ un dossier Poussez MULTI-CONTROL vers le haut ou vers le bas. % Avanc...
Page 75 - Fonction et utilisation; utilisation de
Choix des fichiers à partir de laliste des noms de fichiers L ’ utilisation est la même que celle du lecteur de CD intégré. (Reportez-vous à la page 71, Choix des fichiers à partir de la liste des nomsde fichiers .) Introduction aux opérationsavancées 1 Appuyez sur MULTI-CONTROL pour affi- cher le m...
Page 76 - Avance ou retour rapide
! Quand FOLDER est sélectionné, il n ’ est pas possible de jouer un sous-dossier de ce dos-sier. ! Lorsque l ’ examen des fichiers ou des dossiers est terminé, la lecture normale des fichiersreprend. Lecture de plagesmusicales sur l ’ iPod Pour des détails sur l ’ iPod supporté, reportez- vous à la ...
Page 79 - Cette fonction n
Sélection de plages dans la listed ’ albums de l ’ interprète en cours de lecture La liste des albums de l ’ interprète sélectionné s ’ affiche. Vous pouvez sélectionner un album ou une plage musicale à partir du nom de l ’ in- terprète. ! Selon le nombre de fichiers sur l ’ iPod, un certain retard ...
Page 80 - Réglage de l
Introduction aux réglagessonores 1 Appuyez sur MULTI-CONTROL pour affi- cher le menu principal. 2 Utilisez MULTI-CONTROL pour choisir AUDIO. Tournez pour changer l ’ option de menu. Ap- puyez pour sélectionner. 3 Tourner MULTI-CONTROL pour sélec- tionner la fonction audio. Tournez MULTI-CONTROL pour...
Page 81 - Rappel d; Réglage des courbes d; Réglages sonores
# Si le réglage de la sortie arrière est SUB W , il n ’ est pas possible de régler l ’ équilibre des haut- parleurs avant-arrière. Reportez-vous à la page86, Réglage de la sortie arrière et du contrôleur de haut-parleur d ’ extrêmes graves . Utilisation de l ’ égaliseur L ’ égaliseur vous permet de ...
Page 82 - égalisation; Fréquence centrale; extrêmes graves
Réglage fin de la courbed ’ égalisation Vous pouvez ajuster la fréquence centrale et lefacteur Q (caractéristiques de la courbe) dechacune des gammes de fréquence actuelle-ment sélectionnée ( LOW / MID / HI ). Niveau (dB) Fréquence centrale Q=2N Q=2W Fréquence (Hz) 1 Utilisez MULTI-CONTROL pour choi...
Page 83 - Fréquence de coupure; Utilisation du filtre passe-haut
2 Sélectionnez le mode de réglage SW SETTING 1. 3 Tournez MULTI-CONTROL pour choisir le réglage désiré.NORMAL (phase normale) — REV (phase in- versée) — OFF (haut-parleur d ’ extrêmes graves désactivé) # Vous pouvez effectuer les mêmes opérations en poussant MULTI-CONTROL vers le haut ou vers les ba...
Page 85 - avertissement; Utilisation de la source AUX; Réglages initiaux
Ajustement des réglagesinitiaux 1 Maintenez la pression sur SRC jusqu ’ à ce que l ’ appareil soit mis hors tension. 2 Appuyez sur MULTI-CONTROL jusqu ’ à ce que CLOCK SET apparaisse sur l ’ écran. 3 Tournez MULTI-CONTROL pour choisir un des réglages initiaux.CLOCK SET (horloge) — WARNING TONE (si- ...
Page 87 - Activation de la source
Réglage de l ’ amplificateur de puissance interne Cet appareil est équipé d ’ un amplificateur de puissance élevée. Toutefois, dans des systè-mes particuliers, des amplificateurs externessont utilisés à la place de l ’ amplificateur in- terne. Si vous utilisez des amplificateurs exter-nes pour réali...
Page 88 - , mais vous pouvez le modifier; adaptateur; indiquer; Tournez pour changer de réglage.
2 Appuyez sur MULTI-CONTROL pour mettre la source BT AUDIO en service. # Pour mettre la source BT AUDIO hors service, appuyez à nouveau sur MULTI-CONTROL . Saisie du code PIN pour laconnexion sans fil Bluetooth Pour connecter votre téléphone cellulaire à cetappareil via la technologie sans fil Bluet...
Page 89 - Lors de la connexion d; Saisie des titres de dis-; Autres fonctions
Utilisation de la source AUX Deux appareils auxiliaires (magnétoscope ouappareils portables vendus séparément) peu-vent être connectés à cet appareil. Lorsquedes appareils auxiliaires sont connectés, ilssont automatiquement lus en tant que sour-ces AUX et affectés à AUX1 ou AUX2 . La rela- tion entr...
Page 90 - Silencieux; Utilisation de base
Silencieux Le son de cet appareil est coupé automatique-ment dans les cas suivants : ! Quand un appel est effectué ou reçu surun téléphone cellulaire connecté à cet ap-pareil. ! Quand le guidage vocal est émis par unéquipement de navigation Pioneerconnecté à cet appareil. Le son est coupé, MUTE est ...
Page 92 - Accessoires disponibles
Lecture de plagesmusicales sur l ’ iPod Utilisation de base Vous pouvez utiliser cet appareil pour comman-der un adaptateur interface pour iPod, vendu sé-parément. % Avance ou retour rapide Poussez MULTI-CONTROL vers la gauche ou vers la droite et maintenez la pression pendantenviron une seconde pui...
Page 93 - Audio Bluetooth
! Appuyez sur BACK pour revenir à l ’ affichage précédent. ! Pour revenir au menu principal, appuyez defaçon prolongée sur BACK . ! Appuyez sur BAND/ESC pour revenir à l ’ affi- chage ordinaire. ! Si vous n ’ utilisez aucune fonction pendant en- viron 30 secondes, l ’ écran revient automati- quement...
Page 94 - Connexion d; affiche. Cet appareil est
Remarques ! Pour avoir des détails sur le mode de fonction-nement, reportez-vous au mode d ’ emploi de l ’ adaptateur Bluetooth. Cette section donne de brèves informations sur le fonctionnementdu lecteur audio Bluetooth avec cet appareil,qui diffèrent légèrement ou sont plus courtesque celles figura...
Page 95 - affiche. Le lecteur audio; Téléphone Bluetooth
Remarque Avant de pouvoir utiliser des lecteurs audio, vousdevrez peut-être entrer le code PIN dans cet appa-reil. Si votre lecteur nécessite un code PIN pourétablir une connexion, recherchez le code sur lelecteur ou sur la documentation qui l ’ accompa- gne. Reportez-vous à la page 88, Saisie du co...
Page 96 - Exécution d; Reconnaissance vocale; Prise d; Réponse à ou rejet d
! Quand vous sélectionnez la source téléphone,vous pouvez utiliser seulement FADER/BALANCE (réglage de l ’ équilibre so- nore) dans le menu audio. Réglage pour la téléphoniemains libres Avant de pouvoir utiliser la fonction téléphoniemains libres, vous devez préparer l ’ appareil pour une utilisatio...
Page 97 - Si le téléphone n
Fonctionnement d ’ un appel en attente % Réponse à un appel en attente Quand un appel arrive, appuyez sur MULTI-CONTROL . # Vous pouvez aussi effectuer cette opération en poussant MULTI-CONTROL vers le haut. % Terminer tous les appels Poussez MULTI-CONTROL vers le bas. % Basculer entre les appelants...
Page 98 - Utilisation d
! La fonction DEVICE INFO est identique à celle du lecteur audio Bluetooth. (Reportez-vous àla page 95, Affichage de l ’ adresse BD (Blue- tooth Device) .) ! Si un téléphone cellulaire est connecté à cetappareil via la technologie sans fil Bluetoothavec HSP (Head Set Profile), les fonctions CLEAR ME...
Page 100 - Transfert des entrées dans l
Connexion à un téléphonecellulaire enregistré Connexion manuelle à un téléphoneenregistré 1 Utilisez MULTI-CONTROL pour sélec- tionner CONNECT PHONE dans le menu desfonctions. 2 Appuyez sur MULTI-CONTROL pour affi- cher le mode de paramétrage. 3 Tournez MULTI-CONTROL pour sélec- tionner une affectat...
Page 102 - Effacement de la mémoire; Paramétrage du rejet automatique
3 Tournez MULTI-CONTROL pour sélec- tionner un numéro. # Vous pouvez effectuer les mêmes opérations en poussant MULTI-CONTROL vers le haut ou vers les bas. 4 Appuyez sur MULTI-CONTROL pour pla- cer le curseur sur la position suivante. # Vous pouvez entrer un maximum de 24 chif- fres. 5 Quand vous av...
Page 103 - Syntoniseur XM
Annulation d ’ écho et réduction de bruit 1 Utilisez MULTI-CONTROL pour sélec- tionner ECHO CANCEL dans le menu desfonctions. 2 Appuyez sur MULTI-CONTROL pour mettre l ’ annulation d ’ écho en service. # Appuyez à nouveau sur MULTI-CONTROL pour mettre l ’ annulation d ’ écho hors service. Syntoniseu...
Page 104 - Changement du; Écoute de la radio satellite SIRIUS
Changement du mode desélection du canal XM Vous disposez de deux méthodes pour sélec-tionner un canal : par numéro et par catégorie.Quand vous sélectionnez par numéro, des ca-naux appartenant à n ’ importe quelle catégorie peuvent être sélectionnés. Sélectionnez parcatégorie pour restreindre votre r...
Page 105 - Changement de l; émission
# Vous pouvez aussi effectuer un accord dans une catégorie de canaux désirée. (Reportez-vousà la page suivante, Sélection d ’ un canal dans la ca- tégorie de canal .) Remarque Quand vous changez de source pour choisir lesyntoniseur SIRIUS ou sélectionnez un canal,quelques secondes peuvent s ’ écoule...
Page 107 - Alerte Match; tiver l; Quand le match de l; GAME ALERT; Lecteur de CD à chargeur
Mise en service ou hors service del ’ Alerte Match Après avoir effectué les sélections d ’ équipes, vous devez mettre en service la fonction AlerteMatch. ! En réglage par défaut, la fonction AlerteMatch est en service. 1 Utilisez MULTI-CONTROL pour sélec- tionner GAME ALERT dans le menu desfonctions...
Page 108 - Utilisation des fonctions CD TEXT
! Seules les fonctions mentionnées dans cemode d ’ emploi sont prises en compte par les lecteurs de CD à chargeur 50 disques. ! Cet appareil n ’ est pas conçu pour utiliser les fonctions de liste des titres de disques avecun lecteur de CD à chargeur de 50 disques.Pour des informations sur les foncti...
Page 109 - accentuation dynamique; ajuster la qualité du son du lec-; Utilisation des listes ITS; venance d
Nom de la fonction Utilisation REPEAT Reportez-vous à la page 72, Sélection d ’ une étendue de ré- pétition de lecture . Cependant, les étendues derépétition de la lecture quevous pouvez sélectionner dif-fèrent de celles du lecteur deCD intégré. Les étendues derépétition de la lecture du lec-teur de...
Page 110 - Lecture à partir de
Création d ’ une liste de lecture avec la sélection instantanée des plages ITS 1 Jouez un CD que vous voulez program- mer. Poussez MULTI-CONTROL vers le haut ou vers le bas pour choisir le CD. 2 Utilisez MULTI-CONTROL pour sélec- tionner ITS MEMORY dans le menu desfonctions. 3 Appuyez sur MULTI-CONT...
Page 112 - Syntoniseur TV
Syntoniseur TV Opérations de base Vous pouvez utiliser cet appareil pour comman-der un syntoniseur TV, vendu séparément. Pour avoir des détails sur ce mode de fonc-tionnement, reportez-vous au mode d ’ emploi du syntoniseur TV. Cette section donne des in-formations sur les opérations TV qui diffèren...
Page 114 - entretien agréé par Pioneer le plus
Messages d ’ erreur Quand vous contactez votre distributeur ou leService d ’ entretien agréé par Pioneer le plus proche, n ’ oubliez pas de noter le message d ’ erreur. Lecteur de CD intégré Message Causes possi-bles Action corrective ERROR-11, 12,17, 30 Disque sale Nettoyez le disque. ERROR-11, 12,...
Page 116 - Disques Duaux
! La lecture de disques CD-R/CD-RW non fi-nalisés n ’ est pas possible. ! Ne touchez pas la surface enregistrée desdisques. ! Rangez les disques dans leur coffret dèsque vous ne les écoutez plus. ! Évitez de laisser les disques dans des envi-ronnements trop chauds, en particulier à lalumière directe...
Page 117 - WAV
! Fréquence d ’ échantillonnage : 11,025 kHz à 48 kHz ! Débit de transmission : 16 kbit/s à 320 kbit/s ! Fichier AAC acheté sur le iTunes MusicStore (extension de fichier .mp4) : Non ! Apple Lossless : Non WAV ! Format compatible : PCM Linéaire (LPCM),MS ADPCM ! Bits de quantification : 8 et 16 (LPC...
Page 118 - Exemple de hiérarchie
! Le nombre maximum de fichiers pouvantêtre lus sur un lecteur audio portable USBou une mémoire USB est 15 000. ! Le nombre maximum de dossiers pouvantêtre lus sur un lecteur audio portable USBou une mémoire USB est 500. ! Le nombre maximum de niveaux de réper-toires pouvant être lus sur un lecteur ...
Page 122 - PIONEER CORPORATION
PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KUTOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, BelgiumTEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE ...