Page 2 - After you have finished reading the instructions, keep this man-; Contents
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operateyour model properly. After you have finished reading the instructions, keep this man- ual in a safe place for future reference. Before You Start Information to User 5 For Canadi...
Page 3 - English
Initial Settings Adjusting initial settings 25 Setting the clock 25 Switching the warning tone 25 Switching the auxiliary setting 25 Setting the rear output and subwoofer controller 26 Switching the Ever Scroll 26 Activating the BT AUDIO source 26 Entering PIN code for Bluetooth wireless connection ...
Page 5 - Information to User; For Canadian model; WARNING; CAUTION; About WMA
Information to User Alteration or modifications carried out withoutappropriate authorization may invalidate theuser ’ s right to operate the equipment. For Canadian model This Class B digital apparatus complies withCanadian ICES-003. About this unit The tuner frequencies on this unit are allo-cated ...
Page 7 - Visit our website; Visit us at the following site:; In case of trouble; The front panel can be detached to deter theft.; Removing the front panel; Press DETACH to release the front; Attaching the front panel; Slide the front panel to the left until it
U.S.A. Pioneer Electronics (USA) Inc.CUSTOMER SUPPORT DIVISIONP.O. Box 1760Long Beach, CA 90801-1760800-421-1404 CANADA Pioneer Electronics of Canada, Inc.CUSTOMER SATISFACTION DEPARTMENT300 Allstate ParkwayMarkham, Ontario L3R 0P21-877-283-5901905-479-4411 For warranty information please see the Li...
Page 8 - Installing the battery; Using the remote control
Use and care of the remotecontrol Installing the battery Slide the tray on the back of the remote con-trol out and insert the battery with the plus (+)and minus ( – ) poles aligned properly. ! When using for the first time, pull out thefilm protruding from the tray. WARNING Keep the battery out of t...
Page 9 - Head unit; Insert a disc to play.; Operating this unit
What ’ s What Head unit 1 SRC/OFF button This unit is turned on by selecting a source.Press to cycle through all the availablesources. 2 DISP/BACK/SCROLL button Press to select different displays.Press and hold to scroll the text information.Press to return to the previous display whenoperating the ...
Page 10 - Remote control; Press to increase or decrease the volume.; Display indication; Appears when operating list function.
Remote control Operation is the same as when using the but-tons on the head unit. f VOLUME buttons Press to increase or decrease the volume. g MUTE button Press to turn off the sound. To turn on thesound, press again. h a / b / c / d buttons Press to perform manual seek tuning, fastforward, reverse ...
Page 11 - Basic Operations; Turning the unit on; Selecting a source
7 (song) indicator Appears when the track (song) name is dis-played on the main display section.Appears when song search refinement oniPod browsing function is operated. 8 (subwoofer) indicator Appears when subwoofer is on. 9 LOC indicator Appears when local seek tuning is on. a (shuffle) indicator ...
Page 12 - Adjusting the volume; Turn MULTI-CONTROL to adjust the; Tuner; Select a band; Seek tuning; lected frequency in memory.
! Charging the portable audio player usingcar ’ s DC power source while connecting it to AUX input may generate noise. In this case,stop charging. ! External unit refers to a Pioneer product (suchas ones available in the future) that, althoughincompatible as a source, enables control ofbasic functio...
Page 13 - Tuning in strong signals; The
# You can also change the station by pushing MULTI-CONTROL up or down. # To return to the ordinary display, press BAND or LIST . # If you do not operate the list within about 30 seconds, the display automatically returns to theordinary display. Introduction of advancedoperations 1 Press MULTI-CONTRO...
Page 14 - For title entered CD
Built-in CD Player Basic Operations % Insert a disc into the disc loading slot. Playback will automatically start. # When loading a disc, face the label side of a disc up. % Eject a disc Press EJECT . % Select a folder Push MULTI-CONTROL up or down. # You cannot select a folder that does not have a ...
Page 15 - Press LIST to switch to the track title list
! Depending on the version of iTunes ® used to write MP3 files onto a disc, comment informa-tion may not be correctly displayed. — iTunes is a registered trademark of AppleInc. ! Depending on the version of Windows MediaPlayer used to encode WMA files, albumnames and other text information may not b...
Page 16 - Selecting a repeat play range; Playing tracks in random order; Tracks play in a random order.; Scanning folders and tracks; The first 10 seconds of each track is played.; Pausing playback; Playback of the current track pauses.; Using compression and BMX
3 Turn MULTI-CONTROL to select the function.REPEAT (repeat play) — RANDOM (random play) — SCAN (scan play) — PAUSE (pause) — COMP/BMX (compression and BMX) — TITLE INPUT (disc title input) Notes ! You can also select the function by pressing FUNCTION on the remote control. ! To return to the previou...
Page 17 - Turn to change the setting.; Using disc title functions; Entering disc titles
2 Press MULTI-CONTROL to display the setting mode. 3 Use MULTI-CONTROL to select the de- sired setting. Turn to change the setting. OFF — COMP 1 — COMP 2 — OFF — BMX 1 — BMX 2 Using disc title functions You can input CD titles and display the title.The next time you insert a CD for which youhave ent...
Page 18 - Playing songs on iPod; compatibility on page 6.; Browsing for a song
Playing songs on iPod For details about the supported iPod, refer toiPod ® compatibility on page 6. You can use this unit to control an iPod byusing a cable (e.g., CD-I200), which is sold se-parately. Basic Operations % Fast forward or reverse Push and hold MULTI-CONTROL left or right for about one ...
Page 19 - Function and operation; and
3 Repeat step 2 to find a song you want to listen to. # To return to the previous category (one level higher), press BACK . You can also perform this operation by pushing MULTI-CONTROL left. # To return to the top tier of categories, press and hold BACK . # To return to the ordinary display, press B...
Page 20 - Changing audiobook speed
Playing all songs in a randomorder (shuffle all) % Press to turn shuffle all on. All songs on the iPod play randomly. # To turn shuffle all off, set SHUFFLE in the FUNCTION menu to off. Note You can also turn this function on in the menuthat appears by using MULTI-CONTROL . Selecting songs from albu...
Page 21 - Using balance adjustment; Using the equalizer
Introduction of audioadjustments 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to se-lect. 3 Turn MULTI-CONTROL to select the audio function. Turn MULTI-CONTROL to switch between the audio functions in the following order. ...
Page 22 - Recalling equalizer curves; Adjusting equalizer curves; Fine-adjusting equalizer curve; Center frequency; Audio Adjustments
Recalling equalizer curves There are six stored equalizer curves whichyou can easily recall at any time. Here is a listof the equalizer curves. Display Equalizer curve POWERFUL Powerful NATURAL Natural VOCAL Vocal CUSTOM Custom FLAT Flat SUPER BASS Super bass ! CUSTOM is an adjusted equalizer curve ...
Page 23 - Adjusting subwoofer settings
Frequency Low: 40HZ — 80HZ — 100HZ — 160HZ Mid: 200HZ — 500HZ — 1KHZ — 2KHZ High: 3KHZ — 8KHZ — 10KHZ — 12KHZ Q factor 2N — 1N — 1W — 2W # You can also perform the same operations by pushing MULTI-CONTROL up or down. Adjusting loudness Loudness compensates for deficiencies in thelow- and high-sound ...
Page 24 - Using the high pass filter; Adjusting source levels
Note You can also switch to this setting mode in themenu that appears by using MULTI-CONTROL . Using the high pass filter When you do not want low sounds from thesubwoofer output frequency range to playfrom the front or rear speakers, turn on theHPF (high pass filter). Only frequencies higherthan th...
Page 25 - Adjusting initial settings; put and subwoofer controller); Setting the clock; Use these instructions to set the clock.; Switching the warning tone; Using the AUX source; Initial Settings
Adjusting initial settings 1 Press OFF and hold until the unit turns off. 2 Press MULTI-CONTROL and hold until CLOCK SET appears in the display. 3 Turn MULTI-CONTROL to select one of the initial settings.CLOCK SET (clock) — WARNING TONE (warn- ing tone) — AUX1 (auxiliary input 1) — AUX2 (auxiliary i...
Page 26 - When
Setting the rear output andsubwoofer controller This unit ’ s rear output (rear speaker leads out- put and RCA rear output) can be used for full-range speaker ( REAR SP:FULL / PREOUT:REAR ) or subwoofer ( REAR SP:SUB W / PREOUT:SUB W ) connection. If you switch the rear output setting to REAR SP:SUB...
Page 27 - sor to the next position.
Entering PIN code forBluetooth wireless connection To connect your cellular phone to this unit viaBluetooth wireless technology, you need toenter PIN code on your phone to verify theconnection. The default code is 0000 , but you can change this in this function. ! With some Bluetooth audio players, ...
Page 28 - About; Selecting AUX as the source; Setting the AUX title; tering disc titles; Using the external unit
Using the AUX source Up to two auxiliary devices such as VCR orportable devices (sold separately) can be con-nected to this unit. When connected, auxiliarydevices are automatically read as AUX sourcesand assigned to AUX1 or AUX2 . The relation- ship between AUX1 and AUX2 sources is ex- plained below...
Page 29 - Basic operation; s owner; Advanced operations; Other Functions
Selecting the external unit asthe source % Press SRC to select EXTERNAL as the source. Basic operation Functions allocated to the following opera-tions are different depending on the con-nected external unit. For details concerningfunctions, refer to the connected externalunit ’ s owner ’ s manual. ...
Page 30 - Displaying text information on disc; Available accessories
Playing songs on USB portableaudio player/USB memory You can use this unit to control a USB adapter(e.g., CD-UB100), which is sold separately. For details concerning operation, refer to theUSB adapter ’ s operation manual. This section provides information on USB portable audioplayer/USB memory oper...
Page 31 - Bluetooth Audio; Fast forward or reverse
SCAN Refer to Scanning folders and tracks on page 16. PAUSE Refer to Pausing playback on page 16. Notes ! You can also select the function by pressing FUNCTION on the remote control. ! To return to the previous display, press BACK . ! To return to the main menu, press and hold BACK . ! To return to ...
Page 32 - is displayed. This unit is; Stopping playback
Function and operation 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option. Press to se-lect. 3 Turn MULTI-CONTROL to select the function.CONNECTION OPEN (connection open) — DISCONNECT AUDIO (disconnect audio) — PLAY (Play) — STOP (S...
Page 33 - Bluetooth Telephone; Setting up for hands-free phoning; Connecting a cellular phone
2 Press MULTI-CONTROL to disconnect the Bluetooth audio player.DISCONNECTED is displayed. The Bluetooth audio player is now diconnected from thisunit. Displaying BD (BluetoothDevice) address 1 Use MULTI-CONTROL to select DEVICE INFO in the function menu. 2 Press MULTI-CONTROL to display the setting ...
Page 34 - Making a phone call; Voice recognition; Taking a phone call; Answering or rejecting an incoming call; Operating a call waiting; If not connected yet
Making a phone call Voice recognition 1 Press BAND and hold until VOICE DIAL appears in the display.VOICE DIAL appears in the display. When VOICE DIAL ON is displayed, voice recogni- tion function is now ready. # If your cellular phone does not feature voice recognition function, NO VOICE DIAL appea...
Page 35 - Searching for available cellular phones; flashes and the unit is
! DISCONNECT PHONE (disconnect phone) ! SET PHONE (registering phone) ! CLEAR MEMORY (clear memory) ! NUMBER DIAL (call by entering number) If connected but not registered yet The following functions cannot be operated. ! SEARCH PHONE (search and connect) ! CONNECTION OPEN (connection open) ! CONNEC...
Page 36 - Disconnecting a cellular phone; After disconnection is completed,; When registration is completed,; Deleting a registered phone; The phone being deleted is now on standby.
Disconnecting a cellular phone 1 Use MULTI-CONTROL to select DISCONNECT PHONE in the function menu. Device name of the connected phone appearsin the display. 2 Press MULTI-CONTROL to disconnect a cellular phone from this unit. After disconnection is completed, DISCONNECTED is displayed. Registering ...
Page 37 - Using the Phone Book; Transferring entries to the Phone Book
# You can also perform the same operations by pushing MULTI-CONTROL up or down. # If the assignment is empty, NO DATA is dis- played and operation is not possible. 4 Press MULTI-CONTROL to connect the selected cellular phone. While connecting, CONNECTING is displayed. After the connection is complet...
Page 38 - Using the Call History; Phone book; Call confirmation appears.; Clearing memory; Clearing memory is now on standby.
Using the Call History Important Be sure to park your vehicle and apply the park-ing brake when performing this operation. The 12 most recent calls made (dialled), re-ceived and missed, are stored in the Call His-tory. You can browse the Call History and callnumbers from it. 1 Press LIST to display ...
Page 39 - the data on the selected item is cleared,; XM tuner; s operation manuals. This section; Preset screen is displayed.
6 Press MULTI-CONTROL to clear the memory. While clearing, CLEARING is displayed. After the data on the selected item is cleared, CLEARED is displayed. Setting automatic rejecting 1 Use MULTI-CONTROL to select REFUSE CALLS in the function menu. 2 Press MULTI-CONTROL to turn auto- matic call rejectio...
Page 40 - Turn to change the station press to select.; (channel number select; Displaying the Radio ID; Channel number select setting; Refer to; SIRIUS Satellite Radio tuner; Listening to SIRIUS Satellite Radio; Press
2 Use MULTI-CONTROL to store the se- lected station in memory. Turn to change the preset number. Press andhold to store.The XM preset number you have selected willflash and then remain lit. The selected stationhas been stored in memory. 3 Use MULTI-CONTROL to select the de- sired station. Turn to ch...
Page 41 - Switching the SIRIUS display
% Select a channel. Push MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel num-ber continuously. # You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel categor y on the next page....
Page 42 - Selecting a channel in the channel; Using the Game Alert function; Selecting teams for Game Alert; Switching the Game Alert on or off
Selecting the SIRIUS channelselect mode You have two methods for selecting a channel:by number and by category. When selectingby number, channels in any category can beselected. Select by category to narrow yoursearch down to only channels in a particularcategory. % Press SAT MODE repeatedly to sele...
Page 43 - Displaying game information; Using CD TEXT functions
! If you do not operate the function withinabout 10 seconds, the display is automati-cally returned. Displaying game information If games of your selected teams are currentlyplaying, you can display information of thegames and tune to the broadcast channel.You can display information of the gameswhi...
Page 45 - Using ITS playlists; Creating a playlist with ITS programming; Playback from your ITS playlist
Using ITS playlists ITS (instant track selection) lets you make aplaylist of favorite tracks from the multi-CDplayer magazine. After you have added your fa-vorite tracks to the playlist, you can turn on ITSplay and play just those selections.You can use ITS to enter and play back up to99 tracks per ...
Page 46 - Erasing a CD from your ITS playlist; Displaying disc titles; Selecting discs from the disc title list; Turn to change the disc title. Press to play.; TV tuner
Erasing a CD from your ITS playlist You can delete all tracks of a CD from your ITSplaylist if ITS play is off. 1 Play the CD that you want to delete. 2 Use MULTI-CONTROL to select ITS MEMORY in the function menu. 3 Press MULTI-CONTROL to display the setting mode. 4 Press MULTI-CONTROL to select DEL...
Page 49 - Dual Discs
! Use only conventional, fully circular discs.Do not use shaped discs. ! Use 12-cm or 8-cm CD. Do not use anadapter when playing 8-cm CDs. ! Do not insert anything other than a CD intothe CD loading slot. ! Do not use cracked, chipped, warped, orotherwise damaged discs as they may da-mage the player...
Page 50 - Example of a hierarchy; : Compressed audio file; Compressed audio compatibility; WMA; About handling the iPod; For details, refer to the iPod; About iPod settings
Example of a hierarchy : Folder : Compressed audio file 12 3 4 56 Level 1 Level 2 Level 3 Level 4 ! This unit assigns folder numbers. The usercannot assign folder numbers. ! Folder hierarchy is allowed up to eight tiers.However, a practical hierarchy of folder isless than two tiers. ! Up to 99 folde...
Page 51 - Specifications; General; Audio; CD player
Specifications General Power source ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... Negative typeMax. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ..................... 1...
Page 52 - Afin d; Table des matières
Nous vous remercions d ’ avoir acheté cet appareil Pioneer. Afin d ’ utiliser votre appareil correctement, veuillez lire ce mode d ’ emploi entière- ment. Après avoir lu ce mode d ’ emploi, conser vez-le dans un endroit sûr pour pouvoir vous y référer ultérieurement. Avant de commencer Pour le modèl...
Page 53 - Français
Utilisation de la sortie haut-parleur d ’ extrêmes graves 75 – Réglages du haut-parleur d ’ extrêmes graves 76 Utilisation du filtre passe-haut 76 Accentuation des graves 76 Ajustement des niveaux des sources 77 Réglages initiaux Ajustement des réglages initiaux 78 Réglage de l ’ horloge 78 Mise en ...
Page 55 - PRÉCAUTION; Quelques mots sur WMA
Pour le modèle canadien Cet appareil numérique de la classe B estconforme à la norme NMB-003 du Canada. Quelques mots sur cet appareil Les fréquences du syntoniseur de cet appareilsont attribuées pour une utilisation en Amé-rique du Nord. Son utilisation dans d ’ autres régions peut se traduire par ...
Page 56 - Visitez notre site Web
À propos de la marque SAT RADIOREADY La marque SAT RADIO READY imprimée surla face avant indique que cet appareil peutcontrôler le Syntoniseur Radio Satellite (Satel-lite Radio Tuner) pour Pioneer (syntoniseurXM, ou syntoniseur satellite Sirius, vendus sé-parément). Renseignez-vous auprès de votrere...
Page 57 - Retrait de la face avant; Installation de la pile; ATTENTION
En cas d ’ anomalie En cas d ’ anomalie, consultez le distributeur ou le centre d ’ entretien agréé Pioneer le plus proche. Protection de l ’ appareil contre le vol La face avant peut être retirée pour découra-ger les vols. Important ! Lorsque vous retirez ou remontez la faceavant, manipulez-la douc...
Page 58 - Utilisation de la télécommande; appareil à télécommander.
PRÉCAUTION ! Utilisez une pile au lithium CR2025 (3 V) . ! Retirez la pile si la télécommande n ’ est pas utilisée pendant un mois ou plus. ! Remplacer la pile de manière incorrecte peutcréer un risque d ’ explosion. Remplacez la pile uniquement par une pile identique ou de typeéquivalent. ! Ne mani...
Page 59 - Appareil central; Fente de chargement des disques; Utilisation de l
Description de l ’ appareil Appareil central 1 Touche SRC/OFF Cet appareil est mis en service en sélection-nant une source. Appuyez sur cette touchepour parcourir les différentes sources dispo-nibles. 2 Touche DISP/BACK/SCROLL Appuyez sur cette touche pour choisir un af-fichage différent.Appuyez de ...
Page 60 - Télécommande; Le fonctionnement est le même qu; Indications affichées; Syntoniseur XM et syntoniseur SIRIUS
d Touche BAND/ESC Appuyez sur cette touche pour choisir unedes trois gammes FM ou la gamme AM.Appuyez sur cette touche pour revenir à l ’ af- fichage standard quand vous utilisez lemenu. e Touche LIST Appuyez pour afficher la liste des titres desdisques, la liste des titres des plages, la listedes d...
Page 62 - Opérations de base; Mise en service, mise hors service; Mise en service de l; Choix d; appareil; Réglage du volume
Opérations de base Mise en service, mise hors service Mise en service de l ’ appareil % Appuyez sur SRC pour mettre en ser- vice l ’ appareil. Mise hors tension de l ’ appareil % Maintenez la pression sur OFF jusqu ’ à ce que l ’ appareil soit mis hors tension. Choix d ’ une source Vous pouvez sélec...
Page 63 - Syntoniseur
Syntoniseur Opérations de base % Sélection d ’ une gamme Appuyez sur BAND . # La gamme peut être sélectionnée parmi FM1 , FM2 , FM3 ou AM . % Accord manuel (pas à pas) Poussez MULTI-CONTROL vers la gauche ou vers la droite. % Accord automatique Poussez et maintenez MULTI-CONTROL vers la gauche ou ve...
Page 64 - Accord sur les signaux puissants; Lecteur de CD intégré
Mise en mémoire desfréquences les plus puissantes La fonction BSM (Mémoire des meilleures sta-tions) vous permet d ’ enregistrer automatique- ment les six fréquences d ’ émission les plus puissantes. 1 Utilisez MULTI-CONTROL pour sélec- tionner BSM dans le menu des fonctions. 2 Appuyez sur MULTI-CON...
Page 65 - Affichage d; Appuyez sur DISP pour choisir l
Remarques ! Le lecteur de CD intégré peut lire un CD audioet de l ’ audio compressé enregistré sur un CD- ROM. (Reportez-vous à la page 108 pour desinformations sur les fichiers qui peuvent êtrelus.) ! Lisez les précautions concernant les disqueset le lecteur à la page 107. ! Après avoir introduit u...
Page 67 - Pause de la lecture
! Appuyez sur BACK pour revenir à l ’ affichage précédent. ! Pour revenir au menu principal, appuyez defaçon prolongée sur BACK . ! Appuyez sur BAND pour revenir à l ’ affichage ordinaire. ! Si vous n ’ utilisez pas de fonction excepté TITLE INPUT dans un délai d ’ environ 30 se- condes, l ’ écran r...
Page 68 - Saisie des titres de disque
Remarque Vous pouvez aussi mettre cette fonction en ser-vice ou hors service dans le menu qui s ’ affiche en utilisant MULTI-CONTROL . Utilisation de la compression etde la fonction BMX L ’ utilisation des fonctions COMP (compres- sion) et BMX vous permet d ’ ajuster la qualité sonore de cet apparei...
Page 69 - Pour des détails sur l
Lecture de plagesmusicales sur l ’ iPod Pour des détails sur l ’ iPod supporté, reportez- vous à la page 55, Compatibilité iPod ® . Vous pouvez utiliser cet appareil pour contrôlerun iPod à l ’ aide d ’ un câble (par exemple, CD- I200), vendu séparément. Opérations de base % Avance ou retour rapide ...
Page 70 - Fonction et utilisation; Le fonctionnement de
# Appuyez de façon prolongée sur LIST pour af- ficher la liste des albums de l ’ interprète sélec- tionné. (Cette fonction est également accessibledepuis le menu de fonctions.) # Vous pouvez démarrer la lecture dans la caté- gorie sélectionnée en appuyant de façon prolon-gée sur MULTI-CONTROL . Vous...
Page 71 - albums de; Recherche d
Lecture des plages musicalesdans un ordre aléatoire (shuffle) 1 Utilisez MULTI-CONTROL pour sélec- tionner SHUFFLE dans le menu des fonc-tions. 2 Appuyez sur MULTI-CONTROL pour affi- cher le mode de paramétrage. 3 Utilisez MULTI-CONTROL pour choisir le réglage désiré. Tournez pour changer de réglage...
Page 72 - Modification de la vitesse d; Pendant l
Remarque Vous pouvez aussi mettre cette fonction en ser-vice ou hors service dans le menu qui s ’ affiche en utilisant MULTI-CONTROL . Modification de la vitesse d ’ un livre audio Pendant l ’ écoute d ’ un livre audio sur un iPod, vous pouvez modifier la vitesse de lecture. 1 Utilisez MULTI-CONTROL...
Page 73 - Réglage de l
Introduction aux réglagessonores 1 Appuyez sur MULTI-CONTROL pour affi- cher le menu principal. 2 Utilisez MULTI-CONTROL pour choisir AUDIO. Tournez pour changer l ’ option de menu. Ap- puyez pour sélectionner. 3 Tourner MULTI-CONTROL pour sélec- tionner la fonction audio. Tournez MULTI-CONTROL pour...
Page 74 - Réglages sonores
# FAD 0 est le réglage convenable dans le cas où seulement deux haut-parleurs sont utilisés. # Si le réglage de la sortie arrière est REAR SP:SUB W , il n ’ est pas possible de régler l ’ équilibre des haut-parleurs avant-arrière. Repor- tez-vous à la page 79, Réglage de la sortie arrière et du cont...
Page 75 - Fréquence centrale; extrêmes graves
! Si vous effectuez des ajustements, lacourbe CUSTOM est mise à jour. Niveau (dB) Fréquence centrale Q=2N Q=2W Fréquence (Hz) 1 Utilisez MULTI-CONTROL pour choisir EQ SETTING 2. 2 Appuyez sur MULTI-CONTROL pour affi- cher le mode de paramétrage. 3 Appuyez sur MULTI-CONTROL pour sé- lectionner le seg...
Page 76 - Fréquence de coupure; Utilisation du filtre passe-haut
Remarque Vous pouvez aussi passer à ce mode de réglagedans le menu qui s ’ affiche en utilisant MULTI-CONTROL . Réglages du haut-parleurd ’ extrêmes graves Lorsque la sortie haut-parleur d ’ extrêmes gra- ves est en service, vous pouvez choisir la fré-quence de coupure et régler le niveau desortie d...
Page 78 - Utilisation de la source AUX; Réglages initiaux
Ajustement des réglagesinitiaux 1 Maintenez la pression sur OFF jusqu ’ à ce que l ’ appareil soit mis hors tension. 2 Appuyez sur MULTI-CONTROL jusqu ’ à ce que CLOCK SET apparaisse sur l ’ écran. 3 Tournez MULTI-CONTROL pour choisir un des réglages initiaux.CLOCK SET (horloge) — WARNING TONE (si- ...
Page 79 - Lorsque
1 Utilisez MULTI-CONTROL pour choisir AUX1/AUX2. 2 Appuyez sur MULTI-CONTROL pour mettre en service AUX1/AUX2. # Appuyez à nouveau sur MULTI-CONTROL pour mettre la fonction AUX hors service. Réglage de la sortie arrièreet du contrôleur de haut-parleur d ’ extrêmes graves La sortie arrière de cet app...
Page 80 - file une fois seulement.; Activation de la source; , mais vous pouvez le modifier; adaptateur; indiquer
Mise en service ou hors servicede la fonction Ever Scroll(défilement permanent) Quand la fonction Ever Scroll est en service,les informations textuelles enregistrées défi-lent en permanence. Mettez la fonction horsservice si vous préférez que l ’ information dé- file une fois seulement. 1 Utilisez M...
Page 81 - Utilisez MULTI-CONTROL pour choisir le
! Vous ne pouvez utiliser cette fonction quesi l ’ adaptateur Bluetooth (par exemple, CD- BTB200) est connecté à cet appareil. 1 Utilisez MULTI-CONTROL pour choisir BT VER INFO. 2 Appuyez sur MULTI-CONTROL pour affi- cher le mode de paramétrage. # Appuyez sur BACK pour revenir à l ’ affichage précéd...
Page 82 - Lors de la connexion d; Saisie des titres de dis-; Autres fonctions
Utilisation de la source AUX Deux appareils auxiliaires (magnétoscope ouappareils portables vendus séparément) peu-vent être connectés à cet appareil. Lorsquedes appareils auxiliaires sont connectés, ilssont automatiquement lus en tant que sour-ces AUX et affectés à AUX1 ou AUX2 . La rela- tion entr...
Page 84 - un fichier audio; Accessoires disponibles
Lecture de plages musicalessur le lecteur audio portableUSB/la mémoire USB Vous pouvez utiliser cet appareil pour contrôlerun adaptateur USB (par exemple CD-UB100),vendu séparément. Pour avoir des détails sur ce mode de fonc-tionnement, reportez-vous au mode d ’ emploi de l ’ adaptateur USB. Cette s...
Page 85 - Audio Bluetooth
Nom de la fonction Utilisation REPEAT Reportez-vous à la page 67, Sélection d ’ une étendue de ré- pétition de lecture . Cependant, les étendues derépétition de la lecture quevous pouvez sélectionner dif-fèrent de celles du lecteur deCD intégré. Les étendues derépétition de lecture du lec-teur audio...
Page 87 - affiche. Cet appareil est; affiche. Le lecteur audio; Téléphone Bluetooth
Connexion d ’ un lecteur audio Bluetooth 1 Utilisez MULTI-CONTROL pour sélec- tionner CONNECTION OPEN dans le menudes fonctions. 2 Appuyez sur MULTI-CONTROL pour ou- vrir la connexion.ALWAYS WAITING s ’ affiche. Cet appareil est maintenant en attente de connexion à partirdu lecteur audio Bluetooth.S...
Page 88 - Connexion d; Exécution d; Reconnaissance vocale; Prise d; Réponse à ou rejet d
! Les opérations avancées qui requièrent votreattention, telles que composer des numérossur le moniteur, utiliser l ’ annuaire, etc. sont interdites pendant que vous conduisez. Sivous devez effectuer ces opérations avancées,arrêtez votre véhicule dans un endroit sûr. Remarques ! La courbe d ’ égalis...
Page 89 - Fonctionnement d; Si le téléphone n
Remarques ! Si le mode privé est sélectionné sur le télé-phone cellulaire, la téléphonie mains libresn ’ est pas utilisable. ! La durée estimée de l ’ appel est affichée (elle peut différer légèrement de la durée réelle del ’ appel). Fonctionnement d ’ un appel en attente % Réponse à un appel en att...
Page 90 - Utilisation d
Remarques ! Vous pouvez aussi sélectionner la fonction enappuyant sur FUNCTION de la télécom- mande. ! Appuyez sur BACK pour revenir à l ’ affichage précédent. ! Pour revenir au menu principal, appuyez defaçon prolongée sur BACK . ! Appuyez sur BAND pour revenir à l ’ affichage des conditions de lec...
Page 92 - Transfert des entrées dans l
Connexion à un téléphonecellulaire enregistré Connexion manuelle à un téléphoneenregistré 1 Utilisez MULTI-CONTROL pour sélec- tionner CONNECT PHONE dans le menu desfonctions. 2 Appuyez sur MULTI-CONTROL pour affi- cher le mode de paramétrage. 3 Tournez MULTI-CONTROL pour sélec- tionner une affectat...
Page 94 - Effacement de la mémoire; Paramétrage du rejet automatique
Exécution d ’ un appel par saisie d ’ un numéro de téléphone Important Lorsque vous effectuez cette opération, assurez-vous de garer votre véhicule et de mettre le freinà main. 1 Utilisez MULTI-CONTROL pour sélec- tionner NUMBER DIAL dans le menu desfonctions. 2 Appuyez sur MULTI-CONTROL pour affi- ...
Page 95 - Syntoniseur XM
2 Appuyez sur MULTI-CONTROL pour ac- tiver la réponse automatique. # Appuyez à nouveau sur MULTI-CONTROL pour désactiver la fonction réponse automatique. Mise en service ou hors servicede la sonnerie 1 Utilisez MULTI-CONTROL pour sélec- tionner RING TONE dans le menu des fonc-tions. 2 Appuyez sur MU...
Page 96 - importe quelle catégorie; Affichage de l; Changement du
Le numéro de présélection XM que vous avezchoisi clignote, puis reste allumé. La stationsélectionnée a été mise en mémoire. 3 Utilisez MULTI-CONTROL pour choisir la station désirée. Tournez pour changer de station, appuyezpour sélectionner. # Vous pouvez aussi changer de station en poussant MULTI-CO...
Page 97 - Écoute de la radio satellite SIRIUS; Changement de l; émission
Syntoniseur Radio SatelliteSIRIUS Écoute de la radio satellite SIRIUS Vous pouvez utiliser cet appareil pour comman-der un syntoniseur Radio Satellite SIRIUS,vendu séparément. Quand le syntoniseur SIRIUS est utilisé aveccet appareil, certaines opérations peuvent dif-férer légèrement de celles qui so...
Page 100 - Lecteur de CD à chargeur; Utilisation des fonctions CD TEXT
3 Appuyez sur MULTI-CONTROL pour pas- ser sur cette station et écouter le match. Remarques ! Si vous n ’ avez effectué aucune sélection d ’ é- quipes, NOT SET s ’ affiche. ! Quand aucun match impliquant vos équipesfavorites n ’ est en cours, NO GAME est affiché. Affichage de l ’ ID de la radio Si vo...
Page 101 - utilisation de; accentuation dynamique; ajuster la qualité du son du lec-
3 Tourner MULTI-CONTROL pour sélec- tionner la fonction.REPEAT (répétition de la lecture) — RANDOM (lecture aléatoire) — SCAN (examen du disque) — PAUSE (pause) — COMP/DBE (compression et DBE) — ITS PLAY (lecture ITS) — ITS MEMORY (programmation ITS) — TITLE INPUT (saisie du titre du disque) # Si vo...
Page 102 - Utilisation des listes ITS; Création d
1 Utilisez MULTI-CONTROL pour sélec- tionner COMP/DBE dans le menu des fonc-tions. # Si le lecteur de CD à chargeur ne possède pas la fonction COMP/DBE, NO COMP s ’ affiche quand vous essayez de la sélectionner. 2 Utilisez MULTI-CONTROL pour choisir le réglage désiré. Tournez pour changer de réglage...
Page 103 - Lecture à partir de; Suppression d; Vous pouvez supprimer toutes les plages d
Lecture à partir de votre liste delecture ITS La lecture ITS vous permet d ’ écouter les pla- ges que vous avez enregistrées dans votre listede lecture ITS. Quand vous mettez la lectureITS en service, la lecture des plages inclusesdans votre liste de lecture ITS du lecteur deCD à chargeur commence. ...
Page 104 - Syntoniseur TV
Saisie des titres de disque Utilisez la fonction saisie des titres de disquespour enregistrer jusqu ’ à 100 titres de CD (avec la liste ITS) dans le lecteur de CD à chargeur.Chaque titre peut avoir une longueur maxi-mum de 10 caractères.Pour des détails sur cette opération, reportez-vous à la page 6...
Page 106 - entretien agréé par Pioneer le plus
Dépannage Symptôme Causes possi-bles Action corrective L ’ iPod ne fonc- tionne pas cor-rectement. Les câbles nesont pas connec-tés correcte-ment. Déconnectez lecâble de l ’ iPod. Quand le menuprincipal de l ’ iPod est affiché, recon-nectez le câble.Réinitialisez l ’ iPod. Messages d ’ erreur Quand ...
Page 108 - Exemple de hiérarchie
Fichiers audio compresséssur un disque ! Selon la version de Windows Media Playerutilisée pour encoder les fichiers WMA, lesnoms d ’ album et les autres informations textuelles peuvent ne pas s ’ afficher correc- tement. ! Cet appareil peut ne pas fonctionner cor-rectement selon le logiciel (ou la v...
Page 110 - Caractéristiques techniques; Généralités
Caractéristiques techniques Généralités Tension d ’ alimentation ......... 14,4 V CC (10,8 V à 15,1 V acceptable) Mise à la masse ....................... Pôle négatifConsommation max. en courant ..................................................... 10,0 A Dimensions (L × H × P) : DIN Châssis ..........
Page 111 - PIONEER CORPORATION
PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KUTOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, BelgiumTEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE ...