Pioneer DEH-15 - Manual

Product registration Visit us at the following site: 1 Register your product. We will keep the details of your purchase on file to help you refer tothis information in the event of an insuranceclaim such as loss or theft. 2 Receive updates on the latest products and technologies. 3 Download owner s ...

Turning the unit on % Press SOURCE to turn the unit on. When you select a source the unit is turned on. Selecting a source You can select a source you want to listen to. To switch to the built-in CD player, load a disc in this unit (refer to page 10). % When using the head unit, press SOURCE to sele...

Listening to the radio 1 2 3 4 1 Band indicator Shows which band the radio is tuned to, AM or FM. 2 Frequency indicator Shows to which frequency the tuner is tuned. 3 Stereo ( 5 ) indicator Shows that the frequency selected is being broadcast in stereo. 4 Preset number indicator Shows what preset ha...

Playing a CD 1 2 1 Track number indicator Shows the track currently playing. 2 Play time indicator Shows the elapsed playing time of the cur- rent track. 1 Insert a CD into the CD loading slot. Playback will automatically start. CD loading slot # You can eject a CD by pressing CD EJECT . 2 After a C...

2 Press 5 to turn repeat play off. The track currently playing will continue to play and then play the next track. Note If you perform track search or fast forward/re-verse, repeat play is automatically cancelled. Pausing CD playback Pause lets you temporarily stop playback of the CD. 1 Press 6 to t...

Introduction of audio adjustments 1 2 1 Audio display Shows the audio adjustments status. 2 LOUD indicator Appears in the display when loudness is turned on. % Press AUDIO to display the audio func- tion names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adju...

! CUSTOM is an adjusted equalizer curve that you create. ! When EQ FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between EQ FLAT and a set equalizer curve. % Press EQ to select the equalizer. P...

Note If you make adjustments when a curve other than CUSTOM is selected, the newly adjusted curve will replace the previous curve. Then a new curvewith CUSTOM appears on the display while se- lecting the equalizer curve. Adjusting loudness Loudness compensates for deficiencies in the low- and high-s...

Setting the clock Use these instructions to set the clock. 1 Press SOURCE and hold until the unit turns off. 2 Press AUDIO repeatedly until clock ap- pears in the display. 3 Press c or d to select the segment of the clock display you wish to set. Pressing c or d will select one segment of the clock ...

Understanding built-in CD player error messages When problems occur during CD play an error message may appear on the display. If an error message appears on the display refer to the table below to see what the problem is and the suggested method of correcting the pro- blem. If the error cannot be c...

! This unit conforms to the track skip func- tion of the CD-R/CD-RW disc. The tracks containing the track skip information are skipped automatically. ! If you insert a CD-RW disc into this unit, time to playback will be longer than when you insert a conventional CD or CD-R disc. ! Read the precautio...

Specifications General Power source ............................. 14.4 V DC (10.8 15.1 V al- lowable) Grounding system ................... Negative type Max. current consumption ..................................................... 10.0 A Dimensions (W × H× D): DIN Chassis ..................... 178 ...

Note: • This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recre-ational vehicle, truck or bus, check the batteryvoltage. • To avoid shorts in the electrical system, be sure to disconnect the ≠ battery cable before beginning installation. • Refer to th...

<ENGLISH> Installation Note: • Before finally installing the unit, connect the wiring temporarily, making sure it is all connectedup properly, and the unit and the system workproperly. • Use only the parts included with the unit to ensure proper installation. The use of unauthorized partscan c...