Page 2 - After you have finished reading the instructions, keep this man-; Contents
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this man- ual in a safe place for future reference. Before You Start About this manual 4 About this ...
Page 3 - English
Switching the telephone muting/ attenuation 34 Switching the auxiliary setting 34 Switching the digital source setting 35 Switching the analog input setting 35 Resetting the audio functions 35 Other Functions Turning the clock display on or off 36 Using different entertainment displays 36 Setting th...
Page 4 - Switching the analog; About digital and analog; Digital1; Before You Start
About this manual This unit features a number of sophisticated functions ensuring superior reception and op- eration. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This operation manual will help you benefit fully from this unit s potential and...
Page 5 - Installing the battery
source is too high, sound may be produced in-correctly. Also, sound controls (e.g. loudness,equalizer and so on) should be off to preventincorrect sound. Precautions ! Keep this manual handy as a reference for operating procedures and precautions. ! Always keep the volume low enough so that you can ...
Page 6 - DVD; Reverse mode
Using the remote control operation mode switch There are three remote control operation modes on the remote control. In order to con- trol every function of connected equipment properly, be sure to change settings as fol- lows: ! DVD mode This mode can control Pio- neer DVD player. Every function of...
Page 7 - Display unit; Power indicator
Page 9 - What
f SOURCE button This unit is turned on by selecting a source. Press to cycle through all the available sources. g Joystick This is effective only when controlling Pio- neer DVD player. ! DVD mode Move to select the setting. Click to set the setting or select on or off. ! DEQ mode Move to select the ...
Page 10 - Turning the unit on; Press SOURCE to turn the unit on.; Selecting a source; Press SOURCE to select a source.; Adjusting the volume; Use VOLUME to adjust the sound level.; Turning the unit off; Press SOURCE and hold until the unit; Basic Operations
Turning the unit on % Press SOURCE to turn the unit on. When you select a source the unit is turned on. Selecting a source % Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources: Digital source 1 Digital source 2 Televi- sion DVD player/multi-DVD player Mu...
Page 11 - You can use this unit with a separately sold
You can use this unit with a separately sold DVD player or multi-DVD player. For details concerning operation, refer to the DVD player s or multi-DVD player s operation manual. This section provides information on DVD operations with this unit which differs from that described in the DVD player s or...
Page 12 - point you want to resume playback next; DVD Player
The Bookmark function lets you resume play- back from a selected scene the next time the disc is loaded. ! This function can be operated only when the DVD disc is playing on the Pioneer DVD player which features Bookmark function. % During playback, press BOOK.M at the point you want to resume playb...
Page 13 - You can use this unit with a separately sold TV
You can use this unit with a separately sold TV tuner. For details concerning operation, refer to the TV tuner s operation manuals. This section provides information on TV operations with this unit which differs from that described in the TV tuner s operation manual. Important You can use the follow...
Page 14 - Playing a CD; You can use this unit to control a multi-CD
Playing a CD 1 3 2 You can use this unit to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page. Important
Page 15 - Playing tracks in a random; Repeating play
Introduction of advanced multi-CD player operation 1 1 Function display Shows the function status. Important You can use the following functions only whenthe remote control is set to DEQ mode. % Press o to display the function names. Press o repeatedly to switch between the following functions: Repe...
Page 16 - Scanning CDs and tracks; Pausing CD playback; Creating a playlist with ITS
Note If you turn random play on during DISC and then return to the playback display, D.RANDOM ap- pears in the display. Scanning CDs and tracks While you are using DISC , the beginning of each track on the selected disc plays for about 10 seconds. When you are using MCD , the be- ginning of the firs...
Page 17 - Erasing a track from your ITS; Playback from your ITS playlist; Erasing a CD from your ITS playlist
3 Select a desired track by pressing m or n . 4 Press r to store the currently playing track in the playlist. ITS Input is displayed briefly and the currently playing selection is added to your playlist. The display then shows ITS again. 5 Press BAND to return to the playback display. Note After dat...
Page 18 - Using disc title functions; Entering disc titles; Title input; Displaying disc titles; Selecting discs from the disc; Using CD TEXT functions; You can use these functions only with a CD
3 Press q to erase all tracks on the cur- rently playing CD from your ITS playlist. All tracks on the currently playing CD are erased from your playlist and ITS Clear is dis- played. 4 Press BAND to return to the playback display. Using disc title functions You can input CD titles and display the ti...
Page 19 - Displaying titles on CD TEXT discs; Scrolling titles in the display; Using compression and; You can use these functions only with a multi-
Displaying titles on CD TEXT discs % Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: Play time Disc Title (disc title) DiscArtist Name (disc artist name) Track Title (track title) TrackArtist Name (track artist name) # If specific information has not been recorded o...
Page 20 - Operating the DSP menu; Digital Signal Processor
Introduction of DSP adjustments Important ! You can use the following functions only whenthe remote control is set to DEQ mode. ! Following functions are effective only whenyou connected a Pioneer multi-channel pro-cessor (DEQ-P7650) to this unit. By carrying out the following settings/adjust- ments...
Page 21 - Operating the DSP details menu; Using the sound field control
Operating the DSP details menu 1 2 3 4 5 6 1 Front left speaker 2 Center speaker 3 Front right speaker 4 Rear left speaker 5 Subwoofer 6 Rear right speaker % Press p and hold until SP Set appears in the display, then press p to display the DSP function names. After SP Set is displayed, press p repea...
Page 22 - Using the position selector
Using the position selector One way to assure a more natural sound is to accurately position the stereo image, putting you right in the center of the sound field. The position selector function lets you automati- cally adjust the speaker output levels and in- serts a delay time to match the number a...
Page 23 - Using the dynamic range; Using the Dolby Pro Logic
2 Press q or r to adjust the source vo- lume. Each press of q or r increases or de- creases the source volume. SLA +4 SLA 4 is displayed as the source vo- lume is increased or decreased. Notes ! DVD, Video CD, CD and MP3/WMA are set tothe same source level adjustment volumeautomatically. ! Analog5 a...
Page 24 - Adjusting the Music mode; Using the down-mix function; Setting the speaker setting
Adjusting the Music mode You can adjust the Music mode with the fol- lowing three controls. ! Panorama ( Panorama ) extends the front stereo image to include the surround speakers for an exciting wraparound ef- fect. ! Dimension ( Dimension ) allows you to gra- dually adjust the sound field either t...
Page 25 - Selecting a cross-over
1 Press p and hold until SP Set appears in the display. 2 Press m or n to select the speaker to be adjusted. Each press of m or n selects the speaker in the following order: Front speakers Center speaker Rear speak- ers Subwoofer S.W (subwoofer setting) # You can switch to S.W only when the subwoo- ...
Page 26 - Adjusting the speaker; Adjusting the speaker output
1 Press p and hold until SP Set appears in the display, then press p to select C.Over. After SP Set is displayed, press p until C.Over appears in the display. 2 Press m or n to select the speaker to be adjusted. Each press of m or n selects the speaker in the following order: Front speakers Center s...
Page 27 - Using the time alignment; Adjusting the time alignment
settings for the speaker over which you hear the test tone are shown in the display. Front speaker left Center speaker Front speaker right Rear speaker right Rear speaker left Subwoofer # Check each speaker output level. If no adjust- ments are needed, perform step 4 to stop the testtone. # The sett...
Page 28 - Using the auto-equalizer; Auto TA and; operate this function.; WARNING
2 Press m or n to select the speaker to be adjusted. Each press of m or n selects the speaker in the following order: Front speaker left Center speaker Front speaker right Rear speaker right Rear speaker left Subwoofer # You cannot select speakers whose size is set at OFF . 3 Press q or r to adjust ...
Page 30 - standing auto TA and EQ error messages; Using the equalizer; Recalling equalizer curves
3 Turn the ignition switch to ON or ACC. If the car s air conditioner or heater is turned on, turn it off. Noise from the fan in the air conditioner or heater may prevent correct auto TA and EQ. # Press SOURCE to turn the source on if this unit is turned off. 4 Select the position for the seat on wh...
Page 31 - Adjusting 3-band parametric
Display Equalizer curve VOCAL Vocal FLAT Flat CUSTOM1 Custom 1 CUSTOM2 Custom 2 ! CUSTOM1 and CUSTOM2 are adjusted equalizer curves. ! When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between...
Page 33 - Adjusting initial settings; Setting the clock
Adjusting initial settings 1 Initial settings lets you perform initial setup of different settings for this unit. Important You can use the following functions only whenthe remote control is set to DEQ mode. 1 Function display Shows the function status. 1 Press SOURCE and hold until the unit turns o...
Page 34 - Switching the auxiliary setting
Adjusting the brightness You can adjust the display brightness. Initially this mode is set to 12. 1 Press o to select Brightness. Press o repeatedly until Brightness ap- pears in the display. 2 Press m or n to adjust the bright- ness level. Each press of m or n increases or de- creases the brightnes...
Page 36 - Selecting AUX as the source
Turning the clock display on or off You can turn the clock display on or off. % Press 0 to turn the clock display on or off. Each press of 0 turns the clock display on or off. # The clock display disappears temporarily when you perform other operations, but the clockdisplay appears again after 25 se...
Page 37 - Setting the AUX title; Setting remote control; Other Functions
Setting the AUX title The title displayed for the AUX source can be changed. 1 After you have selected AUX as the source, press o and hold until TITLE ap- pears in the display. 2 Input the title. To input the titles, refer to Title input on this page. Setting remote control code type When the remote...
Page 38 - Using the PGM button
Using the PGM button You can operate the preprogrammed functions for each source by using BOOK.M when con- trolling Pioneer head unit. % Press BOOK.M to turn pause on when selecting the following sources: ! DVD Built-in DVD player ! S-DVD DVD player/multi-DVD player ! Multi-CD Multi-CD player # To t...
Page 39 - Troubleshooting; contact your dealer or your nearest PIONEER Service Center.; Additional Information
Troubleshooting Common Symptom Cause Action (See) Power doesn t turn on. The unit doesn t operate. Leads and connectors are incor- rectly connected. Confirm once more that all connections are correct. The fuse is blown. Rectify the reason for the fuse blowing, then replace the fuse. Be very sure to ...
Page 40 - Understanding auto TA and EQ error messages
Message Cause Action (See) ERROR-05 Electrical or mechanical Turn the ignition ON and OFF, or switch to a different source, then back to the DVD player. Understanding auto TA and EQ error messages When correct measurement of car interior acoustic characteristics is not possible using the auto TA and...
Page 41 - Specifications; General; Infrared remote control
Specifications General Rated power source ............... 14.4 V DC (allowable voltage range: 12.0 14.4 V DC) Grounding system ................... Negative type Max. current consumption ..................................................... 0.25 A Display unit: Dimensions (W × H × D) ...................
Page 42 - PIONEER CORPORATION
PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACEN...
