Pioneer AVHX6800DVD - Manual
Pioneer AVHX6800DVD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Checking the firmware version; PROCEDURE; Verify that the firmware on your unit is not already 8.18.
- Page 5 – After starting, there will be a progress bar while updating.
- Page 6 – Display will show “It succeeded...” when the update is complete.
- Page 7 – Shop for other car stereos on our website.
System Firmware Update Instructions for Pioneer In-dash DVD Receivers
(AVH-X6800DVD
and AVH-X7800BT)
This firmware update (version
8.18
) applies only to the following models of Pioneer DVD Receivers sold in the
United States and Canada.
IMPORTANT
Please download and print these Firmware Update instructions before downloading and installing the firmware
update. It is important that you complete all steps correctly and in the order described below.
In order to perform this update, the following items are needed:
•
Pioneer In-dash Multimedia DVD receiver listed above.
•
A blank USB storage device (no files), 2 GB or larger in capacity, formatted to FAT32.
CAUTION
•
DO NOT turn your unit off or disconnect the USB storage device while the firmware is being updated.
•
You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
AVH-X6800DVD
AVH-X7800BT
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Pioneer AVHX6800DVD
Summary
! Checking the firmware version Check whether the firmware of your unit needs to be updated by checking the version number of the firmware. PROCEDURE 1. Start the vehicle engine. 2. Press the [Home] button. 3. Touch the following keys in the following order. ! The “System” screen appears 4. Scroll d...
! ! 10. Read the “WARNING,” then touch the [Start] button to start the update process. If it shows “ERROR” on the display, try another USB device. ! 11. After starting, there will be a progress bar while updating. !
! *The version of this picture is just reference. It depends. 12. Display will show “It succeeded…” when the update is complete. !
