Pioneer 3MT400 - User Manual
Pioneer 3MT400 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Thank you for purchasing this Pioneer quality product.; Tools Required; Adjustable; Prior to Installation; Observe all local plumbing and building codes before you begin
- Page 3 – Faucet Installation; through spout shank from underside of center mounting hole.
- Page 4 – The hot and cold side valves (H) are marked with ‘HOT’ and ‘COLD’ on
- Page 5 – instructions for installation)
- Page 7 – Check for any leaks. Make sure all the connection are secure.
- Page 8 – Engineering Excellence; E ng ine e r ing E xc e l l e nc e
Installation Guide
Two Handle Lavatory Widespread Faucet:
3PR200* • 3BR400* • 3BR530*
•
3DM200* • 3BR410* • 3MT400*
•
3DM300* • 3BR420 • 3MT500*
•
3CB200* • 3BR430* • 3CL400*
•
3GB200* • 3BR500* • 3CS400*
•
3BL200* • 3BR510* • 3BR520
•
This product meets the following standards:
ASME A112.18.1
•
ANSI A117.1
•
ANSI / NSF 61, SECTION 9
•
CUPC / IAPMO LISTED /* ADA COMPLIANT
•
CONTAINS NO MORE THAN 0.25% WEIGHTED
•
AVERAGE LEAD CONTENT
REV-11 19, 12
Engineering Excellence
Pioneer Industries, Inc. © 2012
Engineering Excellence
E ng ine e r ing E xc e l l e nc e
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 REV-11 19, 12 Thank you for purchasing this Pioneer quality product. Tools Required Adjustable Wrench Teflon Tape Rags 3/32” Allen Wrench Flex Hose Prior to Installation Observe all local plumbing and building codes before you begin • installation.Carefully shut off both hot and cold water supplie...
3 REV-11 19, 12 Faucet Installation Place the spout escutcheon (B) underneath of the spout (A). Ensure the 1. gasket (C) is placed underside of the escutcheon (B). Slide the spout (A) through center mounting hole. Slide the spout mounting bracket (D) through spout shank from underside of center moun...
4 REV-11 19, 12 Faucet Installation 4. The hot and cold side valves (H) are marked with ‘HOT’ and ‘COLD’ on the valve. Place steel washer (J) and rubber washer (I) underneath of the ‘HOT’ side valve. Slide the valve through mounting hole. Place rub- ber washer (I) and steel washer (J) to the valve f...
