Philips QP1924/70 - User Manual

QP1924

QP1924

Manufactured for: Philips Personal Health

a division of Philips North America LLC

P.O. Box 10313, Stamford, CT 06904, USA

This symbol on the product’s nameplate

means it is listed by Underwriters’

Laboratories, Inc.

Norelco is a registered trademark of Philips North America LLC.

PHILIPS and Philips shield are registered trademarks of

Koninklijke Philips N.V.

©2024 Philips North America LLC. All rights reserved.

3000.112.3379.3 (05/03/2024)

90°

1/8 in.

3 mm

2

1

6

7

8

3

4

5

NOT INCLUDED

NOT INCLUDED

90°

2

6

10

14

18

1

3

7

11

15

19

4

8

12

16

20

5

9

13

17

21

English

IMPORTANT SAFETY

INSTRUCTIONS

When using an electric product, basic precautions should

always be followed, including the following:

Read all instructions before using this product.

DANGER

To reduce the risk of electric shock:

-

To charge the product, only use a USB power source on

a certified product with output rating 5 V, ≥ 1 A. For safe

charging in a moist environment (e.g. in a bathroom),

only use an IPX4 (splash-proof) power source. A

suitable power source (e.g. Philips HQ87) is available via

www.philips.com/support. If you need support finding the

correct USB power source, contact Philips support at 1-800-

243-3050. Using a non-certified USB power source may

cause hazards or serious injuries.

-

Keep the USB cable and the USB power source dry.

-

Do not reach for a corded product that has fallen into

water. Unplug immediately from the power outlet.

-

Do not place or store the product where it can fall or be

pulled into a tub or sink. Do not place or drop the product

into water or other liquid.

-

This product does not work while it is connected to the

power outlet. Except when charging, always unplug this

product from the power outlet.

-

Remove USB power source from power outlet and product

before cleaning the product with water.

WARNING

To reduce the risk of burns, fire, electric shock, or injury to

persons:

-

This product is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the product by a person responsible for their safety.

Children should be supervised to ensure that they do not

play with the product.

-

Use this product only for its intended household use as

described in this manual. Misuse can lead to hazards or

serious injuries. Do not use attachments not recommended

by Philips North America LLC.

-

Do not use this product to trim scalp hair.

-

To prevent damage and injuries, keep the operating

product away from scalp hair, eyebrows, eyelashes, lips,

inner labia, clothes etc.

-

Be aware that accessories such as combs or guards can

prevent the replacement symbol from becoming visible.

Replace the blade immediately if you notice increased hair

pulling or reduced cutting performance of the product.

-

Never operate this product if it has a damaged USB power

source, if it is not working properly, after it has been

dropped or damaged, or after the product or the USB

power source has been dropped into water. For assistance

call 1-800-243-3050.

-

Keep the USB cable and the USB power source away from

heated surfaces.

-

Never drop or insert any object into any opening.

-

Do not use the USB power source in or near a power outlet

that contains an electric air freshener to prevent damage to

the USB power source.

-

Do not use product outdoors or operate where aerosol

(spray) products are being used or where oxygen is being

administered.

-

Always check cutting units and other attachments and

accessories before you use the product. Never use the

product with a damaged cutting unit, attachment or

accessory, as injury may occur.

-

Always attach the USB cable to the USB power source and

the product first, then attach the USB power source to the

power outlet. To disconnect, set all controls to 'off' position.

Then remove the USB power source from the power outlet.

-

Plug USB power source directly into power outlet. Do not

use an extension cord.

-

Unplug USB power source before plugging in or

unplugging the product.

-

Only use original Philips accessories or consumables.

-

Charge, use and store the product at a temperature

between 41 °F / 5 °C and 95 °F / 35 °C.

-

Keep product and batteries away from fire and do not

expose them to direct sunlight or high temperatures.

-

If the product becomes abnormally hot or smelly, changes

color or if charging takes longer than usual, stop using and

charging the product and contact Philips.

-

Do not place products and their batteries in microwave

ovens or on induction cookers.

-

Do not open, modify, pierce, damage or dismantle the

product or battery to prevent batteries from heating up

or releasing toxic or hazardous substances. Do not short-

circuit, overcharge or reverse charge batteries.

-

If batteries are damaged or leaking, avoid contact with the

skin or eyes. If this occurs, immediately rinse well with water

and seek medical care.

-

When you handle batteries, make sure that your hands, the

product and the batteries are dry.

-

To avoid accidental short-circuiting of batteries after

removal, do not let battery terminals come into contact

with metal objects (e.g. coins, hairpins, rings). Do not wrap

batteries in aluminum foil. Tape battery terminals or put

batteries in a plastic bag before you discard them.

SAVE THESE

INSTRUCTIONS

IMPORTANT INFORMATION

-

This product is waterproof. It is suitable for use in the

bath or shower and for cleaning under the tap. For safety

reasons, the product can therefore only be used without

cord.

-

Because of hygiene, only one person should use the

product.

-

Switch off the product before removing or attaching

attachments and before cleaning.

-

Clean the product after each use.

-

Only use cold or lukewarm water to clean the product.

-

Never use compressed air, scouring pads, abrasive cleaning

agents or aggressive liquids such as gasoline or acetone to

clean the product.

-

Caution: Never dry the trimmer teeth with a towel or tissue,

as this may damage the trimmer teeth.

Introduction

Congratulations on your purchase and welcome to Philips

Norelco!
To fully benefit from the support that Philips Norelco offers,

register your product at:

www.norelco.com/register

.

You can find the model number on the back of your product.

The full model number (e.g. QP1234/56) is located on the

bottom of the packaging, your receipt or order confirmation.

General description (Fig. 1)

1 Protection cap

2 Blade

3 On/off button

4 Battery charging indicator

5 Socket for small plug

6 Skin Protect attachment for wet and dry use

7 Body comb 1/8 in. (3 mm)

8 USB cable

Note: A suitable power source (e.g. Philips HQ87) is

available via www.philips.com/support.

Charging

Charging with the USB power source

Charge the product before first use and when the product

starts working more slowly.

Warning: Keep the USB cable and the USB power source

dry.

1 Insert the small plug of the USB cable into the socket in the

bottom of the handle (Fig. 2).

2 Insert the USB plug into the USB power source (not

included) (Fig. 3).

3 Insert the USB power source into the power outlet (Fig. 4).
4 When the product is charging, the battery charging

indicator lights up continuously (Fig. 5).

5 To fully charge the battery, let it charge for 8 hours.
6 Unplug the adapter from the power source, then remove

the USB power source from the handle.
Note: for safety reasons, the product can only be used when

the USB power source is not attached.

7 When fully charged, the product has an operating time of

30 minutes.

Using the product

Changing attachments

Attaching and detaching the blade

1 To detach the blade from the handle, hold the blade by

both short sides and lift it off the handle (Fig. 6).

2 To attach the blade to the handle, hold the blade by both

short sides and press it onto the handle until it snaps into

place (Fig. 7).

Detaching and attaching the Skin Protect

1 To detach the Skin Protect from the blade, hold one of the

short sides of the Skin Protect between your index finger

and your thumb. Use your thumb to push the upper corner

of the Skin Protect upwards until released from the blade.

Then gently remove the Skin Protect from the blade (Fig. 8).

2 To attach the Skin Protect onto the blade, hook one short

end of the Skin Protect around the blade and press down

on the other end until the Skin Protect snaps into place

(Fig. 9).

Attaching and detaching the body comb

1 To attach the body comb onto the blade, hold the comb by

both short sides and press it onto the blade (Fig. 10).

2 To detach the body comb from the blade, hold the comb by

both short sides and pull it off the blade (Fig. 11).

Switching the product on and off

Press the on/off button once to switch the product on or off

(Fig. 12).

Shaving and trimming intimate areas

Before you begin

Before you use the product, always check the blade for

damage or wear. If the blade is damaged or worn, do not

use the product as injury may occur.

1 Thoroughly clean the area to be shaved or trimmed.
2 Take a position that allows you to reach your intimate area

with the product, for instance:

-

Place one leg on a bathtub or chair (Fig. 13).

-

Sit on a chair.

-

Sit on the toilet.

3 Spread your legs to achieve some initial stretching of the

skin.

Shaving

Use the blade with the Skin Protect to shave the hair on your

intimate areas close to the skin.
Warning for men: When you shave your scrotum, make sure

that you stretch your skin in such a way that the blade cannot

come into contact with the flexible skin.

Warning for women: When you shave the inside of your outer

labia, make sure that you stretch the outer labia in such a way

that the blade cannot come into contact with the inner labia.

Protect your inner labia with your other hand.
1 Attach the blade with the Skin Protect onto the handle.
2 Press the on/off button once to switch on the product.
3 With your free hand, stretch a small area of the skin with

two fingers to make the hairs stand upright (Fig. 14). Only

place the blade on thoroughly stretched skin.

4 Place the blade with the Skin Protect flat onto the skin.

Make sure that the blade is in full contact with the skin

(Fig. 15).

5 Move the product slowly and with light pressure against

the direction of hair growth. As you move along, make sure

that your skin always remains stretched (Fig. 16).

6 When you have finished, switch off the product and clean it

(see 'Cleaning').

Trimming with body comb

Use the blade with the body comb to trim the hair on your

intimate areas to a length of 1/8 in. (3 mm).
1 Remove the Skin Protect from the blade (see 'Detaching

and attaching the Skin Protect').

2 Attach the body comb onto the blade (see 'Attaching and

detaching the body comb') .

3 Press the on/off button once to switch on the product.
4 Place the body comb flat onto the skin. Make sure that the

comb is in full contact with the skin (Fig. 17).

5 With your free hand, stretch a small area of the skin with

two fingers to make the hairs stand upright (Fig. 14). Only

place the body comb on a thoroughly stretched skin.

6 Move the product slowly and with light pressure against

the direction of hair growth. As you move along, make sure

that your skin always remains stretched (Fig. 18).

7 When you have finished, switch off the product and clean it

(see 'Cleaning').

Cleaning

1 Switch off the product.
2 Remove the Skin Protect or body comb from the blade (see

'Changing attachments').

3 Blow off any hairs that have accumulated on the blade, Skin

Protect and/or body comb.

4 Switch on the product and rinse the blade with cold or

lukewarm water (Fig. 19).

Caution: Do not dry the blade with a towel or a tissue

as this may cause damage. The blade is fragile. Handle

it carefully. Do not use the product with a damaged

blade.

1 Rinse the Skin Protect and/or body comb with cold or

lukewarm water (Fig. 19).

2 Carefully shake off excess water and let all parts air dry

completely.

Do not tap the product on the rim of the sink to

remove excess water, as this may cause damage

(Fig. 20).

Replacement

When to replace the blade

For optimal cutting and gliding performance, we advise

you to replace the blade every 4 months or when it no

longer provides the shaving or trimming results you expect.

Depending on your usage behavior, the exact lifetime of the

blade could be longer or shorter.

If blade is damaged

If you notice any damage on your blade, replace it

immediately.

Replacing the blade

1 Switch off the product.
2 Hold the blade by both short sides and detach it by lifting it

off the handle (Fig. 6).

3 Hold the new blade by both short sides and press it onto

the handle (Fig. 7) (‘click’). When you hear a click, the new

blade is placed correctly and ready for use.

Note: Be careful, the edges of the blade are sharp.

Accessories

Replacement parts and accessories may be purchased at a

store near you or on our website

www.philips.com/store

.

The following parts are available:

-

QP229 Blade 2-pack

Assistance

For assistance, visit our website:

www.philips.com/support

or call toll free 1-800-243-3050.

Disposal

-

This product contains a rechargeable NiMH battery which

must be disposed of properly.

-

Contact your local town or city officials for battery disposal

information. You can also call 1-800-822-8837 or visit:

www.call2recycle.org

for battery drop-off locations

(Fig. 21).

-

For assistance, visit our website:

www.philips.com/support

or call 1-800-243-3050 toll

free.

-

Your product is designed and manufactured with

high quality materials and components, which can be

recycled and reused. For recycling information, please

contact your local waste management facilities or visit:

www.recycle.philips.com

.

Full Two-Year Warranty

Philips North America LLC warrants this new product against

defects in materials or workmanship for a period of two years

from the date of purchase, and agrees to repair or replace any

defective product without charge.

IMPORTANT

: This warranty does not cover damage resulting

from accident, misuse or abuse, lack of reasonable care, the

affixing of any attachment not provided with the product or

loss of parts or subjecting the product to any but the specified

voltage.*
The blade is not covered by the terms of this warranty because

it is subject to wear and tear.

NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES.

In order to obtain warranty service, simply go to

www.philips.com/support

. It is suggested that for your

protection you return shipments of product by insured mail,

insurance prepaid. Damage occurring during shipment is not

covered by this warranty.
NOTE: No other warranty, written or oral, is authorized by

Philips North America LLC.
This warranty gives you specific legal rights, and you may

also have other rights which vary from state to state. Some

states do not allow the exclusion or limitation of incidental or

consequential damages, so the above exclusion and limitations

may not apply to you.
*Read enclosed instructions carefully.

45-DAY MONEY-BACK GUARANTEE

If you are not fully satisfied with your product send the

product back and we’ll refund you the full purchase price.

The product must be shipped prepaid by insured mail,

insurance prepaid, have the original sales receipt,

indicating purchase price and date of purchase.
We cannot be responsible for lost mail.
The product must be postmarked no later than 45 days

after the date of purchase. Philips reserves the right to

verify the purchase price of the product and limit refunds

not to exceed suggested retail price.
To obtain the money-back guarantee service, please go to

www.PhilipsMoneyBack.com and follow the simple 3-step

process.

Delivery of refund check will occur 6–8 weeks after receipt of

returned product.