Page 2 - Contents
1 EN Contents 1 Important 2 Safety 2Notice 3 2 Your Micro Music System 5 Introduction 5What's in the box 5 Overview of the main unit 6 Overview of the remote control 7 3 Get started 8 Place your product 8 Connect the radio antenna 9 Connect power 9 Prepare the remote control 9 Power on 10 Set the cl...
Page 3 - Important; Safety
2 EN 1 Important Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For th...
Page 4 - Hearing safety; Notice; Compliance
3 EN Hearing safety Caution • To avoid hearing damage, limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume, the shorter is the safe listening time. Be sure to observe the following guidelines when using your headphones. • Listen at reasonabl...
Page 5 - Care for your product
4 EN Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. The Bluetooth® word mark and logos are registered trademarks ow...
Page 6 - Introduction
5 EN 2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support. Introduction With this unit, you can: • enjoy audio from discs, USB devices, Bluetooth devices, and other ...
Page 7 - Overview of the main unit
6 EN a IR sensor b LED indicator • Standby indicator: turns red when this product is switched to standby. • Bluetooth indicator: turns blue to indicate the Bluetooth connection status. c Display panel • Show current status. d • Switch this product on or to standby. e • Press to select a source: DISC...
Page 8 - Overview of the remote
7 EN m (volume) • Adjust volume. n • Connect to the supplied radio antenna. o • Connect external audio devices. p jack • Connect to the supplied power adapter. Overview of the remote control 18 17 14 13 15 16 12 11 10 9 2 1 3 4 5 7 8 6 a • Switch this product on or to standby. b • Select CD source. ...
Page 9 - Get started; Place your product
8 EN n • Adjust display brightness. o • Stop play or erase a program. p • Press to start, pause, or resume play. q • Select USB source. • Select AUDIO IN source. r • Select Bluetooth source • In Bluetooth mode, press and hold for more than 2 seconds to enter pairing mode. 3 Get started Caution • Use...
Page 10 - Prepare the remote
9 EN Connect the radio antenna • Connect the supplied radio antenna to this product before listening to radio. Connect power Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. • Risk of electric shock! B...
Page 11 - Power on; Switch to standby mode; Set the clock
10 EN Power on Press . » The product switches to the last selected source. Switch to standby mode Press again to switch the product to standby with no clock display, or to standby with clock display. » The red standby indicator lights up. • In standby, you may press and hold to toggle clock display ...
Page 12 - Play from disc; Play from USB; Control play
11 EN 4 Play Play from disc 1 Press to select CD source. 2 Insert a disc. » Play starts automatically. If not, press . BTM2660 Play from USB Note • Make sure that the USB device contains playable audio content. 1 Insert a USB device into the socket. 2 Press to select the USB source. » Play starts au...
Page 13 - Skip tracks; Program tracks; enabled devices
12 EN Skip tracks For CD: Press / to select tracks. For MP3 disc and USB: 1 Press / to select an album or a folder. 2 Press / to select a track or a file. Program tracks This function allows you to program 20 tracks in the desired sequence. 1 In stop mode, press to activate the program mode. » is di...
Page 16 - Adjust sound; Select a preset sound; Other features; Set the alarm timer
15 EN 6 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press repeatedly to select a preset sound effect. Adjust volume level • On the remote control, press (volume) repeatedly. Mute sound • Press to mute or unmute the sound. 7 Other featur...
Page 17 - Activate/deactivate alarm timer; Set the sleep timer; Listen to an external; Charge your devices
16 EN Activate/deactivate alarm timer In standby mode, press repeatedly to activate or deactivate timer. » If timer is activated, is displayed. • In standby, you may press and hold to toggle clock display on or off. Set the sleep timer This music system can switch to standby automatically after a se...
Page 18 - Product
17 EN 2 Connect the product to power. » Once the device is recognized, the charging starts. Note • Compatibility of this product with all devices is not guaranteed. 8 Product information Note • Product information is subject to change without prior notice. • Rated output power (Amplifier): Total 20W...
Page 19 - USB playability; Supported MP3 disc
18 EN • Input: 100-240 V ~ , 50/60 Hz, 1.2A • Output: DC 12.0V, 2.5A • Operation power consumption: 15W • Standby power consumption: < 0.5W (clock display off) • Dimensions (W x H x D): 433 x 226 x 67 mm (without stand) • Weight: 2.2 kg USB playability information Compatible USB devices: • USB fl...
Page 20 - Troubleshooting
19 EN 9 Troubleshooting Warning • Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips We...
