Page 2 - Safety warnings; General
2 EN Safety warnings Do not insert the power plug in a wall socketor hang the TV to the wall before allconnections are made. • Place or hang the TV wherever you want, but make sure that air can circulate freely through theventilation slots. • Do not install the TV in a confined space such as a book ...
Page 3 - Getting started; Before you start
Before you switch on your TV, connect all your peripheral equipment. See To make video and audioconnections, p. 46. There is a wide range of audio and video equipment that can be connected to your TV. See To makeaudio and video connections, p. 46. EXT1 can handle CVBS, RGB and Audio L/R; EXT2 can ha...
Page 4 - Tip: for best quality use the suppressor cable supplied.; Overview of the side connector panel
< Insert the aerial plug firmly into the aerial socket x at the bottom of the TV. Getting started (Continued) EN 4 - To connect a camera, camcorder or game, see To make video and audio connections, p. 47. - To connect a headphone, see To make video and audio connections, p. 47. - To connect a USB...
Page 5 - Colour keys; OPTION; Cursor keys; OK
B StandbyPress to switch the TV from or to standby mode.When switched to standby, a red indicator on the TV lights up. TV Press to select TV mode. DVD STB VCR AUX Press one of these keys to set your remote control tooperate a peripheral device.See Audio and Video equipment keys, p. 57. DEMO Press to...
Page 6 - - to browse through the TV channels and sources stored; Select your peripherals; MODE; Audio and Video equipment keys; CANCEL
V VolumePress + or - to adjust the volume. ¬ Mute key: interrupt the sound or restore it. +P- Channel selection - to browse through the TV channels and sources stored and marked in the Favourite channels lists; - to select a page in Teletext mode;- to quickly browse through the lists in the menus;- ...
Page 7 - AV; Define the position of the PIP screen; FAV
b Dual screen/PIP Press the b key to switch on or off Dual screen or PIP, according to the format selection made in the PIP formatlist. See p. 24.PIP allows you to call up a subscreen within the main screenenabling you to watch two TV channels or a TV channel andpictures from a peripheral at the sam...
Page 8 - Use of the OPTION key; Picture format; Keys at the right side of the TV
EN 8 Digital audio language: See Adjust sound menu settings, p. 19. Digital subtitle language: See Adjust feature menu settings, p. 24. Subtitles: See Adjust feature menu settings, p. 24. Picture format: See Use of the TV menu settings, Adjust picture menusettings, p. 18. Equalizer: See Use of the T...
Page 9 - Press the power switch; First time installation
Introduction: Digital TV EN 9 Note: if the TV has already been installed before and/or youwant to change the First time installation settings, proceedwith Use of the TV menu settings, p. 14. Besides traditional analogue broadcasts, you can also receivedigital broadcasts via a roof or loft mounted di...
Page 10 - PHILIPS
First time installation (Continued) EN 10 After the Welcome screen you are asked to select a language ofthe TV's on-screen menus. The text of the header and the infoon screen continuously change language. Also the digital audioand subtitle language will be set to the selected menu language. 1. Press...
Page 11 - Step 3: Settings assistant: select your TV settings
First time installation (Continued) EN 11 By means of several split screens/full screens you areprompted to select your preferred picture, sound andambilight settings, to finally arrive at a complete settingwhich satisfies you. 1. Press the green colour key on your remote control to enter the Settin...
Page 12 - How to navigate through the menus; Introduction; TV menu
How to navigate through the menus EN 12 A lot of guiding instructions, help texts and messages will bedisplayed on your TV when you use the menus or when you tryto execute an action.Read the help texts which are being displayed on the specificitem highlighted.The colour keys at the bottom of the scr...
Page 13 - How to navigate through the menus (continued)
How to navigate through the menus (continued) EN 13 4. Use the cursor up/down to select a menu item. - TV settings allows you to adjust your preferred picture, sound and ambilight settings - Features allows you to control the settings of special TV features - Installation allows you- to select your ...
Page 14 - Settings assistant; Use of the TV menu settings; Adjust viewing and listening settings
EN 14 Each time you've made a selection, press the green key toconfirm your selection. 1. Select Settings assistant and press the cursor right. > By means of several split screens/full screens you areprompted to select your preferred picture, sound andambilight settings to finally arrive at a com...
Page 15 - Press the green colour key to store the selected setting.; B. Use of the Standards settings; Reset to standard
Use of the TV menu settings (continued) EN 15 < Select Picture, Sound or Ambilight and press the cursorright. > A menu appears which allows you to fine tune thepicture, sound and ambilight settings. > To adjust the Picture settings, see Adjust picture menusettings, p. 16. > To adjust the...
Page 16 - Adjust picture menu settings; TV settings; Picture
The picture menu contains the settings that affect the quality ofthe picture. 1. Press the MENU/BROWSE key on the remote control. > The main menu appears. 2. Select TV menu and press the cursor right. > The TV menu is moved to the left. 3. Select TV settings and press the cursor right. > Th...
Page 17 - Adjust picture menu settings (Continued)
Custom tint (only when Tint is set to Custom) Fine tunes the white point (WP) and black level (BL) of thepicture. 1. Select Custom tint and press the cursor right.2. Use the cursor keys to select and adjust the settings of: R-WP : allows you to customise the colour tint by adjusting the red whitepoi...
Page 18 - Auto format; Tip: this function is also accessible via the; key on
DNR DNR automatically filters out and reduces the image noise. This improves picture quality when receiving weak signals. < Select Off, Minimum, Medium or Maximum accordingto the image noise in the picture. MPEG artefact reduction MPEG artefact reduction On smoothens the transitionson digital con...
Page 19 - Adjust sound menu settings; Sound
The sound menu contains the settings that affect the quality ofthe sound. 1. Press the MENU/BROWSE key on the remote control. > The main menu appears. 2. Select TV menu and press the cursor right. > The TV Menu is moved to the left. 3. Select TV settings and press the cursor right. > The TV...
Page 21 - Enjoy Ambilight; Ambilight; Ambilight
Enjoy Ambilight EN 21 The ambilight menu contains the settings for controlling theambient lighting. Using ambient light gives a more relaxedviewing experience and improves perceived picture quality.Analysis of the picture content adapts the colours continuously.But the lights can also be set to any ...
Page 23 - Custom colour; Allows you to customise the ambilight colour.; Select Saturation to adjust the colourfulness of the light.; Separation; Press the
Enjoy Ambilight (Continued) EN 23 Custom colour Allows you to customise the ambilight colour. < Select Palette to select the general colour of the lightoutput. < Select Saturation to adjust the colourfulness of the light. Separation Allows you to define the stereo effect in case, Relaxed,Moder...
Page 24 - Adjust feature menu settings; Digital subtitle language
The Features menu allows you to control the settings of specialTV functions, features and accessory equipments. 1. Press the MENU/BROWSE key on the remote control. > The main menu appears. 2. Select TV menu and press the cursor right. > The TV Menu is moved to the left. 3. Select Features and ...
Page 25 - Adjust feature menu settings (Continued); Important: you have forgotten your code !
Sleeptimer This sets a time period after which the TV automaticallyswitches to standby. 1. Select Sleeptimer.2. Press the cursor right.3. Select a value with the cursor up/down. > The list will have values from 0 to 180 minutes. When 0is selected, the sleeptimer is switched off. Child lock With a...
Page 26 - Select Set or Change code.; On timer; to switch to on a selected time and day
Adjust feature menu settings (Continued) EN 26 Set code/Change code This allows you to set or change the personal 4-digit accesscode that is used in the different lock functions of the TV. < Select Set or Change code. > If no PIN-code exists yet, the menu item is set to Setcode. Follow the ins...
Page 27 - Common interface; Demo; Features; Note: this functionality is only available in certain countries.
Adjust feature menu settings (Continued) EN 27 Common interface This allows you to access common interface applicationsdefined by the service provider of the Common Interface(CI) module.The Common Interface (CI) module can contain one ormore applications, which are used to communicate with theCI ser...
Page 28 - How to search for and store TV channels; Installation; Languages
How to search for and store TV channels EN 28 This menu allows you to select your preferred language formenu, audio and subtitle. Menu language This allows you to select your menu language out of the listof the available languages. Preferred audio language (only with Digital TV broadcasting) This al...
Page 29 - How to search for and store TV channels (Continued); Select Channels in the TV, Installation menu.; Automatic installation; be according to the standard for your country; Store TV and radio channels; Channels; - already installed channels will not be renumbered.
How to search for and store TV channels (Continued) EN 29 After language and country are set correctly, you can nowsearch for and store the TV channels. < Select Channels in the TV, Installation menu. Automatic installation The TV will scan the entire frequency spectrum based onthe selected count...
Page 30 - Analogue: manual installation; Note: when on a frequency where a DVB signal is; Digital: test reception
How to search for and store TV channels (Continued) EN 30 Analogue: manual installation This gives you the possibility to manually install (tuning-inchannel by channel) analogue channels. Manual installationwill not find nor store any DVB-T (digital) channels. 1. Select Analogue: manual installation...
Page 31 - Uninstall - reinstall; Rearrange the channel number list; Rearrange
This allows you to rename, to reshuffle and to uninstall orreinstall the stored channels. < Press the corresponding colour keys and follow the onscreen instructions. Reshuffle This allows you to change the order of the stored TVchannels. 1. Select the channel you want to change place.2. Press the...
Page 32 - Select your location; Select Teletext 2.5 On to take advantage of this feature.; Display a Programme title; key on the; Preferences
Set your preferences Manual network installation EN 32 This menu contains items that can set or adjust various specialTV functions and that will typically be accessed onlyoccasionally. Select your location This allows you to select the location of your TV.If you choose for Shop it will result in fix...
Page 33 - Digital Audio In; Select your connections; Connections
This allows you to select the peripheral equipment you haveconnected to the audio and video connectors. 1. Select Connections.2. Press the cursor right.3. Select the input to which the peripheral equipment is connected. > When you select EXT1 , EXT2 , EXT3 , HDMI 1 , HDMI 2 , VGA , Side, AUDIO IN...
Page 34 - Decoder; Factory settings
Reset the Factory settings Select a Decoder channel number EN 34 This allows you to define one or more channel numbers asdecoder channel numbers when a decoder or a descrambler isconnected to EXT1 or EXT2 . 1. Select the channel number under which you have stored the programme that comes from your d...
Page 35 - How to upgrade the TV software; Software upgrade
This allows you to upgrade your TV software using a USBdevice. USB device upgrade It is possible to initiate an upgrade procedure from a USBdevice before you start up the TV. The memory device mustbe filled with the appropriate upgrade image (and structure)which can be found on the www. philips.com/...
Page 36 - Create your favourite list; Note; To select a channel from the displayed favourite list
EN This allows you to select up to four favourite channels lists withyour preferred TV channels and radio stations. For example, eachmember of your family can create his/her own favourite list.In addition to the favourite channel lists you may also select a listwith only digital TV channels or a lis...
Page 37 - Create your favourite channels list (Continued)
EPG (Electronic Programme Guide) (only with Digital TV broadcasting) When the All channels list is displayed or selected you may filterthe list and select a list with only the TV channels or a list withonly the radio channels.1. Press the FAV key. > The last selected channel list appears. 2. Pres...
Page 38 - Previous day or back to Today.; Programme Guide What’s on; What’s on
2. Press the green colour key on the remote control to watch/listen to the selected programme currently on air. 3. Press the red colour key to mark/unmark a reminder on the selected programme. You can set up to a maximum of10 reminders. > The TV will wake up automatically or display a messagewhen...
Page 39 - To insert a Memory card/USB device; Multimedia Browser; To view content from a Memory Card/USB device
The Multimedia browser lets you display pictures and/or moviesor play audio files stored on a USB device or a memory card.The Multimedia browser application is invoked from the mainmenu.Your TV is also equipped with the possibility to connect yourcomputer or home network and to access and view yourp...
Page 40 - To remove the Memory card/USB device; Card data protection
Multimedia Browser (Continued) EN 40 To remove the Memory card/USB device 1. Press the MENU/BROWSE key on the remote control to switch off the main menu. 2. Remove the Memory card/USB device. Card data protection • Do not remove the card/USB device when the content is being read or when browsing. Su...
Page 41 - Multimedia Browser menu; Following icons may appear:
Multimedia Browser menu 1. Insert a USB device.2. Select the USB device under Multimedia with the cursor up/down. > The Multimedia browser allows you to browse contentstored on the inserted USB device. > The 2-panel browser will be shown with the left panelcontaining the content types (Music, ...
Page 43 - Select subpages; Teletext; Note: Teletext is not available via equipment connected to the
Most TV channels broadcast information via teletext.This TV has a 1200 pages memory that will store mostbroadcasted pages and subpages to reduce waiting time. Aftereach programme change, the memory is refreshed. < Press b to switch the teletext on. > The main index page appears on the screen. ...
Page 44 - Menu; Reveal
Hypertext With hypertext you can quickly jump to a pagenumber orsearch for a specific word shown on the current teletextpage. 1. Press the OK key to highlight the first word or a number on the page. 2. Use the cursor up/down, left/right to select any other word or number you want to search for. 3. P...
Page 45 - Text info
Some digital channels offer dedicated digital text services (forexample BBCi). 1. Press b to switch Digital text on. 2. To use the digital text, follow the instructions on screen.3. Depending on the service, you may be asked to use the cursor keys, the OK key, the coloured keys, the teletext key and...
Page 46 - To make video and audio connections; Connector table; Best video performance
To make video and audio connections EN 46 Tip: use the inputs that are available on your equipment that provide the best video or audioperformance, as below. Note: your TV comes with all types of connectors with the exception of the DVI connector butsome of your equipment may be equipped with this t...
Page 47 - Headphone; To make video and audio connections - Side panel overview; Warning: do not connect cable
Camera, Camcorder, Game 1. Connect your camera, camcorder or game as shown. 2. Connect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment alsoconnect AUDIO R 3 . S-VHS quality with an S-VHS camcorder isobtained by connecting the S-VHS cables withthe S-VIDEO input 1 and AUDIO inputs 3 ...
Page 48 - To make video and audio connections - Rear panel overview
Pr Pb Y DIGITAL AUDIO AUDIO HDTV & Progressive DISPLAY SYNCHRONIZED 480p, 576p, 720p, 1080i IN IN L R EXT3 AUDIO OUT AUDIO OUT L R DIGITAL AUDIO OUT HDMI 1 HDMI 2 ANTENNA 75 o o o PC-VGA EXT2 EXT1 o o AUDIO IN L/R Pr Pb Y DIGITAL AUDIO AUDIO HDTV & Progressive DISPLAY SYNCHRONIZED 480p, 576p...
Page 49 - Connect a VCR or DVD recorder; With a eurocable
Connect a VCR or DVD recorder EN 49 Warning: do not place your recorder too close to the screen as some recorders may be susceptiblefor signals from the display. Keep a minimum distance of 0,5 m from the screen. ANTENNA EXT2 EXT1 ANTENNA 75 o EXT2 EXT1 2 RECORDER 1 CABLE 3 EXT 1/2 With a eurocable 1...
Page 50 - Connect two VCRs or VCR and DVD recorder; With eurocables; Connect a satellite receiver
Connect two VCRs or VCR and DVD recorder With eurocables 1. Connect the aerial cables 1 and 2 as shown. 2. Connect your VCRs or DVD-recorder to EXT1 and 2 with the eurocables 4 and 5 . 3. Select the equipment you have connected in the Installation menu, Select your connections,p. 33 and link it to E...
Page 51 - With a DVI connector; With a HDMI connector
Connect a DVD player or HD receiver Connect a DVD player, HD receiver or game console EN 51 With a DVI connector 1. Connect the DVI to HDMI cable to one of the HDMI connectors of your TV 1 . 2. Connect the audio cable 2 to the DIGITAL AUDIO IN connector of the TV. 3. Select the equipment you have co...
Page 52 - Connect a DVD player, a satellite receiver or HD receiver; With Component Video Connectors
Pr Pb Y DIGITAL AUDIO AUDIO HDTV & Progressive DISPLAY SYNCHRONIZED 480p, 576p, 720p, 1080i IN IN L R EXT3 AUDIO OUT AUDIO OUT L R DIGITAL AUDIO OUT 1 EXT3 : YPbPr EXT3 :AUDIO INR / L 3 DVD / STB 2 DIGITALAUDIOIN Connect a DVD player, a satellite receiver or HD receiver EN 52 With Component Vide...
Page 53 - Connect a PC; PC equipped with a VGA connector:
Notes:- only a PC with digital sound can be connected to the HDMI connection;- if your PC does not have digital sound output, connect your PC via a VGA connector or via HDMI 2 and the L/R AUDIO input of the TV; - before connecting your PC to the TV, select your PC monitor settings to a refresh frequ...
Page 54 - Digital Home Cinema amplifier; DIGITAL AUDIO OUT; Analogue Home Cinema amplifier; AUDIO OUT L
Personal computer to the home network connector EN 54 Connect a Home Cinema amplifier Digital Home Cinema amplifier < Connect a digital Home Cinema amplifier tothe DIGITAL AUDIO OUT connector 1 at the bottom of the TV. Analogue Home Cinema amplifier < According to the type of connector cables ...
Page 55 - TO; Insert a CA module; Use the Common Interface slot
COMMON INTERFACE HDMI 1 HDMI 2 o o ETHERNET o COMMON INTERFACE TO P o o To receive scrambled DTV signals you will need aCA (Conditional Access) module and a Smart cardprovided by the service provider.A CA module can enable additional services, forexample Pay TV.Contact your Common Interface service ...
Page 56 - Record with your recorder; Press the cursor right again to enter the list of types of; Select connected equipment; See the handbook for your recorder.
Record with your recorder Before operating your connected equipment you have to makea selection in the Installation, Select your connections menu,p. 33. 1. Press the MENU/BROWSE key. 2. Select TV menu and press the cursor right.3. Select Installation.4. Press the cursor right.5. Select Connections.6...
Page 57 - To select between Normal and Expert mode; Audio- and video equipment keys
Most of the audio and video equipment from our range ofproducts can be operated with the remote control of your TV.Press one of the keys after you pressed one of the mode keys( DVD , STB , VCR , AUX ) according to the equipment you want to operate with this remote control.See Use of the Remote contr...
Page 58 - Troubleshooting; No sound when
Troubleshooting 58 EN Symptom Possible cause/Remedy No picture < Verify if the supplied cables are connected properly. (The aerial cable to theTV, the other aerial to your recorder, the power cables, ..) < Verify if you selected the correct source. < Verify if the child lock has been switch...
Page 60 - Annex 1 - Philips TV software upgrade with portable memory; Verifying the version of the TV software
Introduction Philips continuously tries to improve its products and itwants you to profit of that even after your purchase.Therefore it allows you to upgrade your TV software using aUSB memory device (not supplied).You can execute the software upgrade procedure yourself. Annex 1 - Philips TV softwar...
Page 61 - Upgrade the TV software
Upgrade the TV software 1. Switch off your TV and remove all memory devices.2. Insert the USB portable memory that contains the downloaded software upgrade. 3. Switch on your TV with the power key B at the side of the TV. 4. The upgrade process starts automatically. After a few seconds the status of...
Page 62 - Local software upgrade procedure
EN 62 Local software upgrade procedure New software, or the currently installed software version,can also be obtained from the www.philips.com/supportwebsite. 1. Go to www.philips.com/support using the web browser of your PC. 2. Follow the procedure to find the information and the software related t...
Page 63 - Annex 2 - Philips TV-Slideshow Format with background music; key on the remote control after having inserted a USB device and; General Rules; files using simple tools.; General Format
Annex 2 - Philips TV-Slideshow Format with background music 63 EN Introduction This document explains how to make a Philips slideshow file with background audio.Be aware that the content of this document is addressing technical or software skilled users.To start the slideshow open the slideshow file...
Page 64 - Tag Name; title; Use
Annex 2 (Continued) 64 EN Supported XML-tags The following table gives a description of the XML syntax. Tag Name philips-slideshow title audio slide-duration slides slide Use mandatory optional optional optional mandatory optional Description Philips slideshow signature including the version. The ti...
Page 65 - Annex 3 - Philips TV - Portable memory and USB issues; Digital Content Issues; recommended to insert maximum one memory card at the same time.; Digital Camera Issues; switched on before connecting to the TV.; USB Memory Device Issues; can access your files.
Annex 3 - Philips TV - Portable memory and USB issues 65 EN Digital Content Issues • See the supplied separate Connected Planet guide, Annex 4: Supported file formats Portable Memory Issues • The following memory cards are supported by the digital media reader: - CompactFlash Card (Type I & II) ...
Page 66 - HDMI IN; PC; Sound interruptions using HDMI to HDMI connection; DIGITAL AUDIO
Annex 4 - Issues referring to connected peripherals with a HDMI connector 66 EN The HDMI IN connector allows the following TV and monitor display modes: HD Standard Definition TV (SDTV) 640x480i720x480i720x576i Enhanced Definition TV (EDTV) 640x480p720x480p720x576p High Definition TV (HDTV) 1920x108...
Page 67 - Index
active control ........................... 18ambilight ......................................21analogue: manual installation . 30antenna......................................... 4audio receiver .......................... 54audio equipment keys ............. 57auto format ...............................
Page 68 - The packaging of this product is intended to; Disposal of your old product; Recycling; Product information; water pollution. Very low standby power consumption.; Disposal of batteries
R The packaging of this product is intended to be recycled. Apply to the local authorities forcorrect disposal. Disposal of your old product Your product is designed and manufactured withhighly quality material and components, which canbe recycled and reused. When this crossed-out wheeled binsymbol ...
Page 69 - A network connection to your PC.
1 Contents What is Connected Planet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1What you need to enjoy Connected Planet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Step 1: In...
Page 70 - If the CD does not start automatically, double-click; My; Please select your language, click on; Select your PMM menu language.; Restart your PC after installing the PMM.
2 & Insert the supplied CD into yourcomputer’s CD drive. If the CD does not start automatically, double-click My Computer , then the CD-ROM drive icon and finally start.htm to start the CD. é Please select your language, click on Install Media Manager and follow the on-screen instructions. Notes...
Page 71 - Adding files in the Philips Media Manager (PMM)
3 Adding files in the Philips Media Manager (PMM) & Select the PMM from your Windows Start-menu ordouble-click on the PMM symbol in the task bar. é Click on Music , Pictures or Movies at the top of the PMM window. “ Select Add Music , Add Pictures or Add Movies . ‘ Click on Add Files or Folders....
Page 72 - OR; Step 2: Identifying your PC configuration; Configuration A; Configuration B; Before connecting your TV; You have
4 We will focus on the two main PC configurations found in modern households today. OR Step 2: Identifying your PC configuration Configuration A Before connecting your TV Configuration B Before connecting your TV You have • a router• one or more PCs connected to the router• one free Ethernet connect...
Page 73 - Push one end of a crossed Ethernet cable (; connector; Connecting your TV; Push one end of an Ethernet cable (; connector at the; Step 3: Connecting and configuring your TV
Configuration B Make sure DHCP/Auto IP (automatic networkaddressing) is enabled on your PC. On most of the recently purchased PCs,automatic network addressing is alreadyenabled. You can check this on your PC with the NetworkUtility on the supplied CD. Connecting your TV & Push one end of a cross...
Page 74 - Step 4: Viewing multimedia content; Programmagids
6 Make sure the PC with Philips Media Manager installed on it (see p. 2) is switched on. & Switch on your TV. é Press the BROWSE/MENU key on the remote control to display the Browse menu. “ Select your PC from which you want to access the content andpress the cursor right. Note: It may take up t...
