PHI VILLA THD-E02GR020 - User Manual

Page 2 - ENJOY YOUR CAPTIVA DESIGNS; Leave these instructions with the consumer.; Table of Contents

2 Safety Information Warnings Preparation Assembly Instructions Troubleshooting First-time Operation Care and Maintenance 2 18 19 20-21 8 3-5 6-7 8-14 Operation Instructions 15-17 Warranty Product Specifications 22 22 ENJOY YOUR CAPTIVA DESIGNS Package Contents If you smell gas:1. Shut off gas to th...

Page 3 - Warnings; IMPORTANT SAFETY

3 Warnings PROP 65 WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which are known to the State of California to cause cancer and birth defects or other reproductive harm.For more information visit www.P65Warnings.ca.gov. IMPORTANT SAFETY Please read this...

Page 4 - FUEL CONCERNS & EXPLOSION HAZARDS

Warnings 4 This gas grill must be installed in accordance with all local codes. If installation is planned in an area with no local codes, your gas grill must be installed in accord with the National Fuel Gas Code with the National Fuel Gas Code ANSI Z223.1, and storage and handling of CSA B149. 2 p...

Page 5 - IF YOU SMELL GAS; GENERAL WARNINGS

5 Warnings The self-contained LP system appliance is design-certified to be used with a standard 20-lb., 12 1/4”-diameter, 18”-tall cylinder with right-handed connection threads. This is the maximum size LP tank to be used with this grill. The cylinder must be marked in accordance with the latest U....

Page 6 - Package Contents

6 ENJOY YOUR CAPTIVA DESIGNS Package Contents 19 16 17 20 18 11 10 12 14 13 15 17 21 2 5 4 7 9 3 9 8 6 7 1 23 22

Page 8 - Preparation; Estimated Assembly Time:; Tools Required for Assembly and Leak Testing (not included):; Assembly Instructions

8 Preparation Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list on previous page and hardware contents below. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Estim...

Page 9 - Back Frame

Assembly Instructions 9 ENJOY YOUR CAPTIVA DESIGNS 2 3 3 8 7 7 7 7 4 5 A D C C C C 10 13 14 12 13 14 Back Frame Crossbar Front Frame Crossbar

Page 15 - Operation Instructions; CHECKING FOR LEAKS

Operation Instructions 15 3 CHECKING FOR LEAKS After all connection are made, check all connections and fittings on the LP gas tank valve, gas hose gas hose and regulator for leaks with a water and soap solution. To prevent fire or explosion while testing for a leak:• Always perform leak test prior ...

Page 16 - CONNECTING GAS CYLINDER

Operation Instructions 16 3 CONNECTING GAS CYLINDER The propane gas supply cylinder to be used must be constructed and marked in accordance with the specifications for LP gas Cylinders of the U.S. Department of Transportation(D.O.T) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Sphere...

Page 17 - CONNECTING THE LP TANK

Operation Instructions 17 CONNECTING THE LP TANK NOTE: Other cylinders may be acceptable for use with this appliance if they are compatible with the appliance nesting hole and retention means. Refer to Page 19-20 of the Assembly Instructions for correct cylinder to cylinder holder connection. WARNIN...

Page 18 - Troubleshooting; Problem

Troubleshooting 18 ENJOY YOUR CAPTIVA DESIGNS Problem Possible Cause Solution If the above solutions do not solve your problem, or you need to replace the accessories,please contact our Customer Service. There is a smell of gas Leak in the gas system Close the cylinder valve immediately.Prevent any ...

Page 19 - First-time Operation; Lighting the Appliance

First-time Operation 19 Prior to using your Captiva Designs gas grill, verify that all of the following is true: • The burner tube is free of any debris or obstruction.• The proper gas type, gas connection, and regulator settings have been installed.• You’ve checked for gas leaks.• Minimum clearance...

Page 20 - Care and Maintenance

Care and Maintenance 20 Burner Assembly Removing The Burner Assembly 1. Make sure all control knobs are in the OFF position, the LP gas supply valve has been closed, and the gas hose is disconnected from the gas supply. 2. Open lid and remove cooking griddle, clip for burner and burners. 3. Slide th...

Page 21 - Cleaning the Burner Assembly; Other Care and Maintenance

Care and Maintenance 21 Cleaning the Burner Assembly – Make sure the grill is cool1. Make sure all control knobs are in the OFF position,the LP gas supply valve has been closed, and the gas hose is disconnected from the gas supply.2. Detach burner by removing the cotter pins at the back of the burne...

PHI VILLA THD-E02GR020 - User Manual

Table of Contents:

Summary

Other PHI VILLA Grills Models