Page 2 - ENJOY YOUR CAPTIVA DESIGNS; Leave these instructions with the consumer.; Table of Contents
2 Safety Information Warnings Preparation Assembly Instructions Troubleshooting First-time Operation Care and Maintenance 2 14 15 16-17 7 3-5 6 7-10 Operation Instructions 11-13 Warranty Product Specifications 18 18 ENJOY YOUR CAPTIVA DESIGNS Package Contents If you smell gas:1. Shut off gas to the ...
Page 3 - Warnings; IMPORTANT SAFETY
3 Warnings PROP 65 WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which are known to the State of California to cause cancer and birth defects or other reproductive harm.For more information visit www.P65Warnings.ca.gov. IMPORTANT SAFETY Please read this...
Page 4 - FUEL CONCERNS & EXPLOSION HAZARDS
Warnings 4 This gas grill must be installed in accordance with all local codes. If installation is planned in an area with no local codes, your gas grill must be installed in accord with the National Fuel Gas Code with the National Fuel Gas Code ANSI Z223.1, and storage and handling of CSA B149. 2 p...
Page 5 - IF YOU SMELL GAS; GENERAL WARNINGS
5 Warnings The self-contained LP system appliance is design-certified to be used with a standard 20-lb., 12 1/4”-diameter, 18”-tall cylinder with right-handed connection threads. This is the maximum size LP tank to be used with this grill. The cylinder must be marked in accordance with the latest U....
Page 6 - Part list; Item; Package Contents
6 ENJOY YOUR CAPTIVA DESIGNS Item Qty. Name 1 1 Lid Handle 2 1 Handle Washer RH 3 1 Handle Washer LH 4 2 Cooking Grate 5 1 Grill Body Assembly 6 1 Grease Tray 7 2 Grill Stand 8 2 Side Shelf 9 2 Stand Cross Bar 10 1 Hook 11 4 Tube Wrap Pad Part list Item Qty. Name Package Contents 1 2 3 4 4 5 6 8 8 9...
Page 7 - Preparation; Estimated Assembly Time:; Tools Required for Assembly and Leak Testing (not included):; Assembly Instructions
7 Preparation Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list on previous page and hardware contents below. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Estim...
Page 11 - Operation Instructions; CHECKING FOR LEAKS
Operation Instructions 11 3 CHECKING FOR LEAKS After all connection are made, check all connections and fittings on the LP gas tank valve, gas hose gas hose and regulator for leaks with a water and soap solution. To prevent fire or explosion while testing for a leak:• Always perform leak test prior ...
Page 12 - CONNECTING GAS CYLINDER
Operation Instructions 12 3 CONNECTING GAS CYLINDER The propane gas supply cylinder to be used must be constructed and marked in accordance with the specifications for LP gas Cylinders of the U.S. Department of Transportation(D.O.T) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Sphere...
Page 13 - CONNECTING THE LP TANK
Operation Instructions 13 CONNECTING THE LP TANK NOTE: Other cylinders may be acceptable for use with this appliance if they are compatible with the appliance nesting hole and retention means. Refer to Page 12-13 of the Assembly Instructions for correct cylinder to cylinder holder connection. WARNIN...
Page 14 - Troubleshooting; Problem
Troubleshooting 14 ENJOY YOUR CAPTIVA DESIGNS Problem Possible Cause Solution If the above solutions do not solve your problem, or you need to replace the accessories,please contact our Customer Service. There is a smell of gas Leak in the gas system Close the cylinder valve immediately.Prevent any ...
Page 15 - First-time Operation; Lighting the Appliance
First-time Operation 15 Prior to using your Captiva Designs gas grill, verify that all of the following is true: • The burner tube is free of any debris or obstruction.• The proper gas type, gas connection, and regulator settings have been installed.• You’ve checked for gas leaks.• Minimum clearance...
Page 16 - Care and Maintenance
Care and Maintenance 16 Cooking Grate The best time to ‘burn-off’ the cooking grate is after every use (approx. 15 minutes). The grill is already hot from cooking thus requiring less fuel to obtain necessary temperature for ‘burn-off’. To ‘burn off’ or heat clean your grill, turn the burners to high...
Page 17 - Burner Assembly; Other Care and Maintenance
Care and Maintenance 17 Burner Assembly Removing The Burner Assembly 1. Make sure all control knobs are in the OFF position, the LP gas supply valve has been closed, and the gas hose is disconnected from the gas supply. 2. Open lid and remove cooking grate, clip for burner and burners. 3. Slide the ...