PHI VILLA THD-E02GR020 - Manuals

5 Warnings The self-contained LP system appliance is design-certified to be used with a standard 20-lb., 12 1/4”-diameter, 18”-tall cylinder with right-handed connection threads. This is the maximum size LP tank to be used with this grill. The cylinder must be marked in accordance with the latest U....

6 ENJOY YOUR CAPTIVA DESIGNS Package Contents 19 16 17 20 18 11 10 12 14 13 15 17 21 2 5 4 7 9 3 9 8 6 7 1 23 22

8 Preparation Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list on previous page and hardware contents below. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Estim...

Assembly Instructions 9 ENJOY YOUR CAPTIVA DESIGNS 2 3 3 8 7 7 7 7 4 5 A D C C C C 10 13 14 12 13 14 Back Frame Crossbar Front Frame Crossbar

Operation Instructions 15 3 CHECKING FOR LEAKS After all connection are made, check all connections and fittings on the LP gas tank valve, gas hose gas hose and regulator for leaks with a water and soap solution. To prevent fire or explosion while testing for a leak:• Always perform leak test prior ...

Operation Instructions 16 3 CONNECTING GAS CYLINDER The propane gas supply cylinder to be used must be constructed and marked in accordance with the specifications for LP gas Cylinders of the U.S. Department of Transportation(D.O.T) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Sphere...

Operation Instructions 17 CONNECTING THE LP TANK NOTE: Other cylinders may be acceptable for use with this appliance if they are compatible with the appliance nesting hole and retention means. Refer to Page 19-20 of the Assembly Instructions for correct cylinder to cylinder holder connection. WARNIN...

Troubleshooting 18 ENJOY YOUR CAPTIVA DESIGNS Problem Possible Cause Solution If the above solutions do not solve your problem, or you need to replace the accessories,please contact our Customer Service. There is a smell of gas Leak in the gas system Close the cylinder valve immediately.Prevent any ...

First-time Operation 19 Prior to using your Captiva Designs gas grill, verify that all of the following is true: • The burner tube is free of any debris or obstruction.• The proper gas type, gas connection, and regulator settings have been installed.• You’ve checked for gas leaks.• Minimum clearance...

Care and Maintenance 20 Burner Assembly Removing The Burner Assembly 1. Make sure all control knobs are in the OFF position, the LP gas supply valve has been closed, and the gas hose is disconnected from the gas supply. 2. Open lid and remove cooking griddle, clip for burner and burners. 3. Slide th...

Care and Maintenance 21 Cleaning the Burner Assembly – Make sure the grill is cool1. Make sure all control knobs are in the OFF position,the LP gas supply valve has been closed, and the gas hose is disconnected from the gas supply.2. Detach burner by removing the cotter pins at the back of the burne...