Peerless MIS374A - Manual
Peerless MIS374A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Tools Needed for Assembly; WARNING; Parts List
- Page 3 – Installation to Solid Concrete Column
- Page 4 – Installation of ST 630 to Column Plate
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 03-30-07 SHEET #: 124-9053-1
Max Load Capacity: 80 lb (36.3 kg)
Installation and Assembly:
20" Column Mount
Model: MIS374A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 of 4 ISSUED: 03-30-07 SHEET #: 124-9053-1 Note: Read entire instruction sheet before you start installation and assembly. Tools Needed for Assembly • phillips screwdriver • drill • 1/4" bit for concrete • level • Do not begin to install your Peerless product until you have read and understood ...
3 of 4 ISSUED: 03-30-07 SHEET #: 124-9053-1 Make sure that column plate (A) is level, use it as atemplate to mark four mounting holes. Drill four 1/4"(6 mm) dia. holes to a minimum depth of 2-1/2"(64 mm). Insert anchors (B) in holes flush withcolumn as shown (right). Place column plate overa...
4 of 4 ISSUED: 03-30-07 SHEET #: 124-9053-1 Note: Model ST 630 is required for assembly.Tilt assembly of ST 630 is required to complete step 2. Attach tilt assembly to column plate (A) using two 1/4-20 x 1/2 phillips screws (D), two split washers (F) and two flatwashers (E). 2 E F D A TILTASSEMBLY R...
