Peerless MIS374A - Manuals

2 of 4 ISSUED: 03-30-07 SHEET #: 124-9053-1 Note: Read entire instruction sheet before you start installation and assembly. Tools Needed for Assembly • phillips screwdriver • drill • 1/4" bit for concrete • level • Do not begin to install your Peerless product until you have read and understood ...

3 of 4 ISSUED: 03-30-07 SHEET #: 124-9053-1 Make sure that column plate (A) is level, use it as atemplate to mark four mounting holes. Drill four 1/4"(6 mm) dia. holes to a minimum depth of 2-1/2"(64 mm). Insert anchors (B) in holes flush withcolumn as shown (right). Place column plate overa...

4 of 4 ISSUED: 03-30-07 SHEET #: 124-9053-1 Note: Model ST 630 is required for assembly.Tilt assembly of ST 630 is required to complete step 2. Attach tilt assembly to column plate (A) using two 1/4-20 x 1/2 phillips screws (D), two split washers (F) and two flatwashers (E). 2 E F D A TILTASSEMBLY R...