Peerless SA730P Manual - Free PDF Download

Page 1 - Installation and Assembly Guide for Wall Arm

Guide for installing articulating wall arms compatible with LCD screens 10" to 24", specifying compatible models, multi-directional pivoting, folding features, internal wire routing, and a maximum load capacity of 25 lb (11.3 kg) with UL certification.

Page 2 - Installation Manual Prerequisites and Safety

Introduction to installation, critical safety warnings, prerequisites, required tools, compatible wall types, and a table of contents for the manual.

Page 3 - Mounting Hardware Parts List for D-LA-100/D-LA-100S

Parts list and diagram detailing mounting hardware components, quantities, and part numbers for models D-LA-100 and D-LA-100S.

Page 4 - Installation on Wood Stud Walls

Instructions for mounting the wall mount on wood stud walls, including procedures for locating studs, marking holes, drilling, and attaching the wall arm assembly using specified screws and caps.

Page 5 - Installation into Concrete and Cinder Block Surfaces

Procedures for installing wall mounts into solid concrete and cinder block surfaces, emphasizing warnings regarding concrete density, proper drilling techniques, anchor insertion, and securing the wall plate.

Page 6 - Screen Mounting with Adapter Plate

Instructions for mounting a screen using an adapter plate, specifying screw sizes and configurations for VESA 75 and VESA 100 mounting patterns, including assembly diagrams.

Page 7 - Cable Management via Clips and Ties

Methods for managing and securing cables during installation by routing cords through management clips attached to the arm and using cable ties to secure cords to the wall plate.

Page 8 - Cable Routing and Securing Methods

Instructions detailing two methods for securing cables: routing them through internal arm slots using plastic cord covers, or securing them with a cable tie at the bottom of the wall plate.

Page 9 - Adjusting Monitor Mount Tension and Tilt

Steps for adjusting tilt and arm tension, including warnings against premature loosening of screws, methods for modifying tension using specific tools, and details on socket screws and lock nuts.

Page 10 - Articulated Wall Mount Overview and Specifications

Installation guide for articulated wall mounts compatible with LCD screens 10" to 24", featuring full rotation, cable management space, and a maximum load capacity of 25 lb (11.3 kg).

Page 11 - Safety Requirements and Installation Prerequisites

Critical safety warnings, installation requirements, necessary tools, and compatibility details for wall types such as wood studs, concrete, and cinder blocks.

Page 12 - Mounting Hardware Parts List for D-LA-100/D-LA-100S

Parts list and diagram detailing mounting hardware components, quantities, and part numbers for models D-LA-100 and D-LA-100S.

Page 13 - Installation on Wood Stud Walls

Instructions for installing a device on a wall with wooden studs, detailing the process of locating, marking, and drilling holes for mounting hardware.

Page 14 - Installation into Concrete and Cinder Block Walls

Step-by-step procedures and safety warnings for mounting wall supports in solid concrete or cinder block walls, focusing on proper anchor placement and torque to prevent damage.

Page 15 - Monitor Mounting with Adapter Plate

Instructions for mounting a monitor using an adapter plate, detailing the installation of specific screws (M4 x 12 mm and M4 x 20 mm) into VESA 75 and VESA 100 configurations.

Page 16 - Cable Management Procedures via Screws and Guides

Steps for managing cables during installation, including attaching cable clips to the adapter plate using M4 screws and routing cables along the bracket using guides secured by a Phillips screw.

Page 17 - Cable Management Methods for Wall Brackets

Two methods for securing cables: routing through bracket slots with cable covers, or attaching cables to a slot at the bottom of the mounting plate using a cable clamp.

Page 18 - Adjusting Monitor Mount Tension and Tilt Mechanisms

Detailed steps and diagrams for adjusting tilt and arm tension using a 5mm Allen wrench on specific screws, along with warnings against over-tightening or premature removal of mounting hardware.

Page 19 - Articulated Wall Mount Features and Load Capacity

Installation and assembly guide for articulated wall mounts compatible with LCD screens 10" to 24", featuring full motion articulation, space-saving flat mounting, internal cable management, and a maximum load capacity of 11.3 kg (25 lb).

Page 20 - Safety Warning and Installation Guide

Safety precautions, installation guidelines, requirements for wall support, torque limits, indoor use restrictions, and necessary tools.

Page 21 - Mounting Hardware Parts List for D-LA-100/D-LA-100S

Parts list and diagram detailing mounting hardware components, quantities, and part numbers for models D-LA-100 SA730P and D-LA-100S SA730P-S.

Page 22 - Installation on Wood Stud Walls

Instructions for installing a wall mount on a wooden stud wall, including safety warnings, torque limits, and step-by-step guidance with diagrams for locating studs, drilling, and attaching the bracket.

Page 23 - Installation into Concrete and Precast Blocks

Instructions for mounting Peerless wall brackets onto solid concrete or precast concrete blocks, including safety warnings regarding concrete specifications and step-by-step assembly procedures.

Page 24 - Mounting VESA Screens with Adapter Plates

Instructions for mounting a VESA-compatible screen using a mounting plate for VESA 75 or 100 patterns, including warnings about screw tightening and step-by-step guidance.

Page 25 - Cable Management During Wall Mount Installation

Instructions for managing cables during the installation of a wall-mounted arm, detailing how to attach cable management brackets and use cable clips to route cables.

Page 26 - Cable Management Methods for Wall Brackets

Two methods for securing cables: routing through bracket slots with cable clips, ensuring the clip's orientation is correct, or attaching cables to a slot at the bottom of the wall plate using a cable clamp.

Page 27 - Adjusting Monitor Arm Tension and Pivot Points

Detailed steps for adjusting tilt and arm tension using a 5mm hex key on specific screws, specifying torque limits (maximum 50 po-lb or 5.6 Nm), and warnings against turning screws excessively.

Page 28 - Limited Five-Year Warranty

Details of the Limited Five-Year Warranty offered by Peerless Industries, Inc., outlining coverage conditions, exclusions, and legal rights, provided in both English and Spanish.

Page 29 - Five-Year Warranty Terms

Specification of the five-year warranty terms, duration, exclusions regarding improper use or unauthorized repairs, liability limits, and company information.