Peerless SUAC9000 - Manuals

5 of 11 ISSUED: 10-01-10 SHEET #: 095-9354-1 Installation to Solid Concrete or Cinder Block NOTE: Wall arm assembly ( A ) must be mounted to wall using inner mounting holes.Make sure that wall arm assembly is level and use wall plate as a template to mark four mounting holes. Top mounting slot will ...

8 of 11 ISSUED: 10-01-10 SHEET #: 095-9354-1 Mounting Flat Panel Screen • Tighten screws so screen brackets are fi rmly attached to screen. Do not tighten with excessive force. Overtightening can cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to ...

9 of 11 ISSUED: 10-01-10 SHEET #: 095-9354-1 Cable Management Cables may be routed using cable clip ( H ). Slip cable clip ( H ) onto bottom of center joint as shown in fi gure 7.1 and secure cables to cable clip using long cable tie ( N ) as shown in fi gure 7.2. Secure cables to bottom of wall pla...

10 of 11 ISSUED: 10-01-10 SHEET #: 095-9354-1 M6 NYLOCK NUTS JOINT SCREWS Roll Adjustment Adapter plate may be rolled +/- 5°. Loosen four M6 nylock nuts half a turn, grasp edges of display and roll screen to desired position as shown. Retighten four M6 nylock nuts and place four snap caps ( J ) onto...

11 of 11 ISSUED: 10-01-10 SHEET #: 095-9354-1 © 2008 Peerless Industries, Inc. Peerless Industries, Inc. establishes a warranty period of fi ve years for products manufactured or supplied by Peerless. This period commences from the date of sale of the product to the original consumer, but will in no...