Peavey UMA 35T II - Manual
Peavey UMA 35T II – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
S P E C I F I C A T I O N S
Outputs:
Direct:
4 ohms
XFMR:
8 ohms, 600 ohms, 25 V, and
70 V (balanced)
Ch. 3 Output, Loop Out, AUX Out:
1 V @ 100 ohms
Inputs:
Channel 1:
Low-Z 500 uV @ 1.8 K ohms (XLR or
screw terminals)
High-Z 50 mV @ 9.5 K ohms
(screw terminals)
Channel 2:
Low-Z 500 uV @ 1.8 K ohms
(screw terminals)
High-Z 50 mV @ 9.5 K ohms (RCA or
screw terminals)
Channel 3:
High-Z 50 mV @ 9.5 K ohms (RCA)
Page: 100 mV (600 ohm transformer
balanced screw terminals)
Loop In: 1 volt @ 3.6 K ohms
Tone Controls:
Bass:
±
10 dB @ 100 Hz
Treble:
±
10 dB @ 10 kHz
Contour: +6 dB @ 100 Hz and 10 kHz
Controls:
Channel 1 Volume Control
Channel 2 Volume Control
Channel 3 Volume Control
Page 1 Volume Control (rear panel
screwdriver adjust)
Page Mute Threshold Control (rear
panel screwdriver adjust)
Channel 1 Mute Threshold Control
(rear panel screwdriver adjust)
Bass Control
Treble Control
Master Volume Control
Contour Switch
Link Switch
Power Switch
Indicators:
Power Indicator (Red LED)
Activity Indicator (Green LED)
SPS
™
Active Indicator (Yellow LED)
Mute 1 and Mute 2 Indicators (Yellow
LEDs)
Muting:
Mute 1: Page input overrides
Channels 1 through 3 with
adjustable threshold
Mute 2: Channel 1 overrides Channels
2 and 3 with adjustable
threshold
Power Requirements:
120 V AC, 60 Hz
Other Features:
Remote Volume Control via screw
terminals
Mute 1 and Mute 2 switch closure via
screw terminals
15 V DC phantom power on Low-Z
inputs
FEATURES
• Two mic/line inputs with screw
terminals on each; one with XLR and
one with dual RCA phono jacks
• One line level input with dual RCA
phono jacks
• One dedicated 600 ohm transformer
balanced paging input with screw
SPECIFICATIONS
Output Power:
35 watts
Frequency Response:
Power Amplifier:
Direct:
±
0.5 dB, 20 Hz to 20 kHz
XFMR:
±
0.5 dB, 50 Hz to 20 kHz
Preamplifier:
±
1.5 dB, 50 Hz to 20 kHz
Distortion:
Power Amplifier:
0.02% (1 kHz)
Preamplifier:
< 0.1% with nominal gain settings
S/N Ratio:
Master Volume Min:
95 dB below rated power
Master Volume Max:
80 dB below rated power
High-Z Inputs:
75 dB below rated power
Low-Z Inputs:
65 dB below rated power
Power Bandwidth:
Direct:
20 Hz to 20 kHz < 0.5% THD
XFMR:
50 Hz to 20 kHz < 0.5% THD
Output Regulation:
Direct:
< 0.5 dB
XFMR:
< 1.0 dB
UMA
™
35T II
Mixer Amplifier
®
ARCHITECTURAL ACOUSTICS®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
