Peavey PM 1 - Manual - manualsarea.com

Page 2 - ATTENTION: Risques de choc électrique — NE PAS OUVRIR!

Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Intended to alert the user of the presence of important operating and maintenance (servicing) instructio...

Page 3 - Thank you for purchasing the PM One

PM ONE ª Professional Stereo Production Mixer Thank you for purchasing the PM One ª stereo production mixer. The unique features of this mixer are sure to add to your performances, both live and recorded. The PM One is a true stereo, fullyfeatured mixer with the DJ in mind. With a built-in stereo gr...

Page 4 - DESCRIPTIONS; POWER; LED located next to the switch will illuminate when the unit is on.; REAR PANEL; ONE

DESCRIPTIONS POWER The PM One is supplied with a switchable power supply. Before plugging your PM One in, pleaseread this entire section to ensure proper supply voltage selection and unit operation. It is importantthat all safety precautions be followed. 1. VOLTAGE SELECTOR SWITCH Use this switch to...

Page 5 - OUTPUTS; INPUTS; DO NOT CHANGE THE CHANNEL INPUT SELECT SWITCH FROM THE LINE

OUTPUTS The PM One features two different stereo outputs. These outputs are designed for the differenttypes of inputs found on various external equipment. Pay close attention to ensure you haveselected the right output for your application. Always use quality, shielded cables and verify a goodconnec...

Page 7 - CHANNEL INPUT SELECT SWITCH; MASTER CONTROLS

13. CHANNEL FADER This stereo fader controls the level of each individual channel regardless of input type. Placing thefader in the Ò0Ó position will produce minimum gain or no signal. Moving the fader to the Ò10Óposition will give maximum gain or the highest output. 14. CHANNEL INPUT SELECT SWITCH ...

Page 8 - The X-Fader is replaceable; LEFT AND RIGHT EQUALIZERS

selected on the right X-Fader Assign). The interim from left to right would produce a combination ofboth, allowing a smooth transition from one channel to the other. Note: The X-Fader is replaceable by removing the two outside mounting screws on the top of the unit. Once the screws have beenremoved,...

Page 9 - CUE

CUE This section identifies and describes the Cue features of the PM One. The Cue allows you topreview and stage material prior to playing through the mains (Output-amp). 23. CUE ASSIGN Use this selector to determine which pair of channels you would like to cue at one time. Youroptions include CH 1/...

Page 12 - m V 47 k Ohm/High impedance; Attenuation at Voice over:

PM ONE SPECIFICATIONS Inputs: Microphone: 1m V 47 k Ohm/High impedance Phone: 3m V 47 k Ohm Line/Tape/CD: 150m V 27 k Ohm Output: 1.5 Volt max Frequency response: 20-20,000 Hz ± 3 dB Distortion: ±0.08% S/N ratio: More than 60 dB Attenuation at Voice over: -12 dB Equalization range: +/-12 dB with ind...

Page 14 - IMPORTANT SAFETY INSTRUCTIONS; Duration Per Day In Hours; SAVE THESE INSTRUCTIONS!

IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed, including the following: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. For example, near...

Page 15 - PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY

PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY Effective Date: July 1, 1998 What This Warranty CoversYour Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada. What This Warranty Does Not CoverThe Warranty does not cover: (1) ...

Page 16 - Peavey Electronics Corporation ¥ 711 A Street ¥ Meridian, MS 39301