Peavey CS 1000X - Manual
Peavey CS 1000X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – FEATURES
- Page 8 – INSTALLATION AND CONNECTION; rack-mount configuration that requires 5; MAINS POWER SOURCE
- Page 10 – MODES OF OPERATION; unbalanced
- Page 11 – crossover systems are possible. We suggest you
- Page 14 – has a fail-safe thermal mechanism built into the unit. If; PASSIVE CROSSOVER
- Page 15 – BIAMP SYSTEM NOTES; from 100 to 5000 Hz for non-Peavey loudspeaker systems.
- Page 16 – BRIDGE MODE NOTES
- Page 18 – PATCH DIAGRAMS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
A WARNING! For optimum performance and reliability DO NOT PRESENT THE AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN 2 OHMS, OR ACOMBINATION OF SPEAKERS THAT TOGETHER ARE LESS THAN 2 OHMS! Using one speaker, it must be rated at 2 ohms minimum. Using two speakers, they must be rated each at 4 ohms minimu...
SPEAKER OUTPUTS (18) (19) Two jacks and binding post speaker output terminals are provided for each channel, with all the outputs from each channel in parallel. Thus, the loudspeaker connection cables can be terminated with phone plugs, banana plugs, or stripped wires for use in the binding post ter...
signal levels beyond this point will not produce any significant increase in output and may cause distortion problems. MODES OF OPERATION 1. STEREO MODE (UNBALANCED INPUTS) The CS 1000X is shipped from the factory with jumper plugs inserted in the transformer (12) and crossover (14) accessory socket...
