Peavey CS 1200X - Manual
Peavey CS 1200X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – FEATURES
- Page 4 – ACTIVE
- Page 9 – limiting and/or the fault detection circuitry.; INSTALLATION AND CONNECTION; toring of power output, DDT activation, and thermal shutdown.; MAINS POWER SOURCE
- Page 13 – INPUT SENSITIVITY CONTROLS
- Page 14 – turn; COMPRESSION; watt available; THERMAL SYSTEM
- Page 15 – HIGH TEMPERATURE LIMITS; just; one; PASSIVE CROSSOVER; use; up most
- Page 16 – CS Series plug-in active crossover modules.; BIAMP SYSTEM NOTES
- Page 17 – BRIDGE MODE NOTES; the bridge ratings are now 1200 W RMS into 8 ohms and 1800 W RMS
- Page 18 – SPECIFICATIONS; Input Sensitivity Impedance:
- Page 19 – DDT Compression System:
- Page 20 – PATCH DIAGRAMS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
WARNING! For optimum performance and reliability DO NOT PRESENT THE AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN 2 OHMS, OR ACOMBINATION OF SPEAKERS THAT TOGETHER ARE LESS THAN 2 OHMS! Using one speaker, it must be rated at 2 ohms minimum. Using two speakers, they must be rated each at 4 ohms minimum....
PROFESSIONAL STEREO POWER AMPLIFIER ACTIVE (1) The active indicate when compression is taking place. As long as gain reduction is occurring, the LED will continue to light, thereby giving a valuable indication of this unique compression function. The DDT function can be defeated on both channels sim...
per channel or 4 ohms BRIDGE mode for any application. Operation at loads of 4 ohms per channel or 8 ohms BRIDGE mode is more desirable for sustained operation applications, be- cause the amplifier will run much cooler at this load. Operation above 4 ohms per channel andeven open-circuit conditions ...
