Peavey UMA 150T II - Manual
Peavey UMA 150T II – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
S P E C I F I C A T I O N S
®
ARCHITECTURAL ACOUSTICS®
Outputs:
Direct:
4 ohms
XFMR:
8 ohms, 600 ohms, 25 V, and
70 V (balanced—100 V 220/
240 Export)
Ch. 4 Output, Loop Out, AUX Out:
1 V @ 100 ohms
Inputs:
Channel 1: Lo Z 500
µ
V @ 1.8 K ohms
(XLR or screw terminals)
Hi Z 50 mV @ 9.5 K ohms
(screw terminals)
Channel 2: Lo Z 500
µ
V @ 1.8 K ohms
(XLR or screw terminals)
Hi Z 50 mV @ 9.5 K ohms
(screw terminals)
Channel 3: Lo Z 500
µ
V @ 1.8 K ohms
(screw terminals)
Hi Z 50 mV @ 9.5 K ohms
(RCA or screw terminals)
Channel 4: Lo Z 500
µ
V @ 1.8 K ohms
(screw terminals)
Hi Z 50 mV @ 9.5 K ohms
(RCA or screw terminals)
Page:
100 mV (600 ohm
transformer balanced
screw terminals)
Loop In:
1 volt @ 2.6 K ohms
Tone Controls:
Bass:
±
10 dB @ 100 Hz
Treble:
±
10 dB @ 10 kHz
Contour: +6 dB @ 100 Hz and 10 kHz
Controls:
Channel 1 Volume Control
Channel 2 Volume Control
Channel 3 Volume Control
Channel 4 Volume Control
Page 1 Volume Control (rear panel
screwdriver adjust)
Page Mute Threshold Control (rear
panel screwdriver adjust)
Channel 1 Mute Threshold Control
(rear panel screwdriver adjust)
Bass Control
Treble Control
Master Volume Control
Contour Switch
Link Switch
Power Switch
Indicators:
Power Indicator (Red LED)
Activity Indicator (Green LED)
SPS™ Active Indicator (Yellow LED)
Mute 1 and Mute 2 Indicators (Yellow
LED's)
Muting:
Mute 1: Page input overrides Chan-
nels 1 through 4 with adjust-
able threshold
Mute 2: Channel 1 overrides Channels
2 through 4 with adjustable
threshold
Power Requirements:
Domestic: 120 V AC, 60 Hz, 400 watts
Export: 220-230/240 V AC, 50/60 Hz,
400 watts
Other Features:
Remote Volume Control via screw
terminals
Mute 1 and Mute 2 switch closure via
screw terminals
24 V DC output
24 V DC phantom power on Lo Z inputs
SPECIFICATIONS
Output Power:
150 watts
Frequency Response:
Power Amplifier:
Direct:
±
0.5 dB, 20 Hz to 20 kHz
XFMR:
±
0.5 dB, 50 Hz to 20 kHz
Preamplifier:
±
1.5 dB, 50 Hz to 20 kHz
Distortion:
Power Amplifier:
0.02% (1 kHz)
Preamplifier:
< 0.1% with nominal gain settings
S/N Ratio (20 kHz BW):
Master Volume Min:
95 dB below rated power
Master Volume Max:
80 dB below rated power
Hi Z Inputs:
75 dB below rated power
Lo Z Inputs:
65 dB below rated power
Power Bandwidth:
Direct:
20 Hz to 20 kHz < 0.5% THD
XFMR:
50 Hz to 20 kHz < 0.5% THD
Output Regulation:
Direct:
< 0.5 dB
XFMR:
< 1.0 dB
UMA
™
150T
II
Mixer Amplifier
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
