Peavey PVM 46 - Manual
Peavey PVM 46 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS PVM; PROXIMITY
- Page 3 – Frequency Response; Figure 1; Figure 2; Loudspeaker Placement; Figure 3
- Page 4 – Peavey Electronics Corporation
Diaphragm type:
Diamond coated
Element type:
Dynamic
Magnet composition:
Neodymium iron boron
Pick up pattern:
Hypercardioid
Front-to-back rejection:
15 dB (typical)
Impedance:
400 ohms, balanced
Frequency response:
45 Hz to 16 kHz
Sensitivity (at 1 kHz open
circuit voltage):
-48 dBV/Pa (1 Pa = 94 dB SPL)
Maximum:
SPL 140 dB
Case (housing):
Die-cast zinc
Finish:
Black rubberized paint
Pop filter:
Dual, integral, open-cell foam
Phasing:
Positive (inward) pressure on
diaphragm produces positive
voltage at Pin #2
Weight:
9.92 oz. (281 g)
Features:
• Diamond-coated
diaphragm
• Neodymium magnetic
design
• Hypercardioid polar
response
• Smooth, accurate
frequency response
• Ultra-high sensitivity
Description
Thank you for choosing the
Peavey PVM 46 diamond-
coated microphone. The PVM
46 is dynamic hypercardioid
and incorporates a neodymium
magnet—which has more
than twice the sensitivity of
conventional microphones—
and our diamond-coated
diaphragm for flawless
transient and frequency
response. The hypercardioid
polar response is one of
the most popular patterns
in the industry for use with
acoustic instruments. The
slightly narrow on-axis polar
pickup affords the vocal user
less bleed-over from other
instruments or vocals. The
rear reflection of the PVM 46
is typically 15 dB less sensitive
than the on-axis response. This
helps reduce feedback from
stage monitors and background
noise.
SPECIFICATIONS PVM
™
46
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SPECIFICATIONS PVM ™ 46 The Amorphous Diamond-Coated Diaphragm is a patented technology that coats the diaphragm with a super-thin layer of diamond that offers many advantages over conventional laminating or other coating materials. Mainly, it improves the stiffness of the large diaphragm. In return...
SPECIFICATIONS PVM ™ 46 20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) -90 -80 -70 -60 -50 -40 dB (re: 1mW / Pa) Frequency Response Figure 1 3 -90 o -60 o -30 o 0 o 30 o 60 o 90 o 250 Hz500 Hz 1 KHz 2 KHz 4.4 KHz 8 KHz 10 KHz 12.5 KHz Figure 2 Pickup Pattern (5 dB per division) Loudspeaker Placem...
Features and specifications subject to change without notice. Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 • FAX (601) 486-1278 ©2005 80307168 Logo referenced in Directive 2002/96/EC Annex IV (OJ(L)37/38,13.02.03 and defined in EN 50419: 2005 The b...
