Page 3 - T a b l e o f C o n t e n t s
3 T a b l e o f C o n t e n t s 1. Introduction ...................................................................................................................5 2. Hardware Description .................................................................................................6 2.1 PageMatr...
Page 5 - . I n t r o d u c t i o n; Features
1 . I n t r o d u c t i o n Congratulations on wisely choosing the PageMatrix ª system for your current and future paging projects. Used in conjunction with our highly-acclaimed MediaMatrix ¨ digital audio system, PageMatrix provides an integrated and flexible approach to all serious paging applicat...
Page 6 - . H a r d w a r e D e s c r i p t i o n; . 1 P a g e m a t r i x C o n t r o l l e r; Front Panel; Indicates that the unit is on.
2 . H a r d w a r e D e s c r i p t i o n 2 . 1 P a g e m a t r i x C o n t r o l l e r The PageMatrix controller is the heart of the system. It is connected via an RS-232 serial port to theMediaMatrix frame running MediaMatrix and PageMatrix software. In fact, one PageMatrix controllercan control u...
Page 7 - Rear Panel; Detachable Power Cord Connector
Rear Panel 6. Program Port (RS-232): Accepts PageMatrix software data from the host computerÕs serial port (Com 1 or Com 2). 7. Control Data Ports (4 RS-232 jacks): Allows connection and control of up to four MediaMatrix systems. 8. Station Inputs (16 RJ45 jacks): All stations are connected to one o...
Page 8 - W a l l - M o u n t P a g i n g S t a t i o n; Station Four; Used to connect the supplied 5-pin handheld microphone.
2 . 2 . S t a t i o n F o u r - W ™ W a l l - M o u n t P a g i n g S t a t i o n Station Four ª -W is a four button wall mount station that includes a hand-held (5-pin) microphone with a push-to-talk switch. Each of the four zone presets are defined and programmed by thePageMatrix software. Front P...
Page 9 - S t a t i o n F o u r - W O p e r a t i o n; LED color indicates status of each of the four Zone presets.; A b o u t Z o n e P r e s e t s
9 S t a t i o n F o u r - W O p e r a t i o n ▲ LED color indicates status of each of the four Zone presets. ▲ Green indicates the zone is available and not in use by another station. ▲ Red indicates the zone is in use. ▲ When the microphone ÒTalkÓ button is pressed, the selected zone preset LED tur...
Page 10 - D e s k t o p P a g i n g S t a t i o n; See the wiring; The aux mic is automatically routed to zone preset one.; S t a t i o n F o u r O p e r a t i o n
10 2 . 3 . S t a t i o n F o u r ™ D e s k t o p P a g i n g S t a t i o n Station Four ª is a four button desktop station that includes an electret condenser microphone. Each of the four button zone presets are defined and programmed by the PageMatrix software. Front Panel Push To Talk button: Pres...
Page 11 - Station Ten; Push To Talk button:; Press to activate the microphone for the selected zone preset.; See wiring; For connection to the PageMatrix controller.
2 . 4 . S t a t i o n T e n ™ D e s k t o p P a g i n g S t a t i o n Station Ten ª is a ten button desktop station that includes an electret condenser microphone. Each of the ten zone presets are defined and programmed by the PageMatrix software. In addition, a 12 button Òtelephone styleÓ key pad a...
Page 12 - S t a t i o n T e n O p e r a t i o n; LED color indicates status of each of the ten zone presets.
12 S t a t i o n T e n O p e r a t i o n ▲ LED color indicates status of each of the ten zone presets. ▲ Green indicates the zone is available and not in use by another station. ▲ Red indicates the zone is in use. ▲ When the Push To Talk button is pressed, the selected zone preset LED turns orange t...
Page 13 - . 4 . T y p i c a l P a g e M a t r i x C o n n e c t i o n; OR
13 PageMatrix ª MediaMatrix ¨ 2 . 4 . T y p i c a l P a g e M a t r i x C o n n e c t i o n BoB Cable AudioCable RS-232 Cable IA ª 200 CAT 5*Cable CAT 5 STANDARD ÒData TypeÓ cable is used. However, there is voltage on the line. DO NOT CONNECT to computer networks. Station 10 ª CAT 5*Cable MediaMatri...
Page 14 - With MediaMatrix Mainframe systems; The complete PageMatrix software system includes:; Step One: Installing the PageMatrix software; . P a g e M a t r i x S o f t w a r e D e s c r i p t i o n
3 . 1 . C o m p u t e r R e q u i r e m e n t s Minimum: 486DX-100 or faster PC with Windows 3.1 / 95 / NT4 or later, 8-16Mb RAMand one available Com Port. 3 . 2 . S o f t w a r e I n s t a l l a t i o n Note: With MediaMatrix Mainframe systems shipped since 1999, the PageMatrix application is alrea...
Page 15 - maximum of 8 zones will be available.; Naming Zone Presets When Using the Station Ten
3 . 2 . 1 . L a u n c h i n g P a g e M a t r i x Windows 95:1. Under the Start menu, select Programs.2. Find the PageMatrix directory and select it.3. Locate PageMatrix , and select it. Windows 3.1:1. Find the PageMatrix Program Group within the Program Manager2. Doulbe click the group, then double...
Page 16 - . 3 . P A G E M A T R I X A P P L I C A T I O N M E N U B A R O V E R V I E W; Closes the active configuration.
3 . 3 . P A G E M A T R I X A P P L I C A T I O N M E N U B A R O V E R V I E W 3.3.1 File Menu New Selecting New opens a new configuration set to factory defaults. Open Brings up the standard file open dialog that allows you to open an existing file (*.pmx). Close Closes the active configuration. S...
Page 19 - . 0 . T y p i c a l P a g e M a t r i x O p e r a t i o n; The components
4 . 0 . T y p i c a l P a g e M a t r i x O p e r a t i o n 4 . 1 . O v e r v i e w 4.1.1. The components PageMatrix / MediaMatrix paging systems consist of five primary components: ▲ At least one PageMatrix paging station connected to the PageMatrix controller via the proper category five cabling ▲...
Page 20 - standard serial strings which can be forwarded to MediaMatrix.; The MediaMatrix system and PASHA; station remains pressed.; Operation within MediaMatrix
3: To interpret the proprietary control data from the paging stations and convert it to standard serial strings which can be forwarded to MediaMatrix. Microphone signals from the paging stations are not acted upon by the PageMatrix Controller,but are simply passed through the box as received. Any sw...
Page 22 - . A P P E N D I X; A R C H I T E C T U R A L A C O U S T I C S
22 5 . A P P E N D I X 5 . 1 . F a c t o r y S u p p o r t Peavey provides customer support and service direct from the factory. If you need further assistanceor information, donÕt hesitate to call us. You can reach us 8 a.m. - 5 p.m. CST at (800) 543-2991 or(601) 483-5376. The address for correspon...
Page 23 - . 2 . U s i n g t h e M e d i a M a t r i x P r o g r a m L a u n c h e r
The Program Launcher is found in the Device/Miscellaneous Menu. It is used to make it easy toopen another Windows application while you are using MediaMatrix. You can label the ProgramLauncher block and include it in any window of a MediaMatrix design. The Program Launcher devicecan either launch an...
Page 24 - . 3 . S t a t i o n 4 - W W i r i n g D i a g r a m
24 Cat 5 Plug 4-Pin Connector 1 485+ 2 485 - 3 GND 4 24V+ 5 GND Cat 5 Plug 3-Pin Connector 6 GND 7 Line Out+ 8 Line Out - 5 . 3 . S t a t i o n 4 - W W i r i n g D i a g r a m 8 7 6 5 4 3 2 1 8 7 6 5 4 2 1 3 CAT 5 NOTE: This is not a network connection.
Page 26 - . 5 . C o n f i g u r i n g t h e P a g e M a t r i x C o n t r o l l e r; You will only adjust switches 1 and 2 according to the chart below.; Factory settings default to 1-16
26 5 . 5 . C o n f i g u r i n g t h e P a g e M a t r i x C o n t r o l l e r As mentioned previously, the PageMatrix controller supports up to sixteen paging stations simultaneously. In larger applications where multiple controllers are necessary, the variousPageMatrix units must be configured for...
Page 27 - P a g e M a t r i x C o n t r o l l e r
27 P o w e r R e q u i r e m e n t s : D o m e s t i c : 1 2 0 V A C ~ , 6 0 H z , 5 0 WE x p o r t : 1 0 0 V A C ~ , 5 0 / 6 0 H z , 5 0 W 2 3 0 V A C ~ , 5 0 / 6 0 H z , 5 0 W I n c l u d e d A c c e s s o r i e s : I E C L i n e C o r d( 4 ) 1 2 p o s i t i o n P h o e n i x - t y p e c o n n e c...
Page 29 - Descripción del hardware; Controlador PageMatrix; Consulte los diagramas del panel delantero; Panel Frontal; LED indicadores de estado de las estaciones:
▲ El controlador dispone de una entrada para el funcionamiento con alimentaci—n a distancia de +24 VCC. ▲ Se utilizan conectores tipo Phoenix para llevar la se–al de intercomunicaci—n de audio a las cajas distribuidoras BoB. ▲ El controlador sustenta hasta cuatro sistemas MediaMatrix. ▲ En el panel ...
Page 30 - Panel posterior; Nota: ƒsta no es una conexi—n de red
Panel posterior 6. Puerto de programas (RS-232): Acepta los datos del software PageMatrix desde el puerto serie (Com 1 o Com 2) de la computadora central. 7. Puertos de datos (4 enchufes RS-232 hembra): Permiten la conexi—n y el control de hasta cuatro sistemas MediaMatrix. 8. Entradas de estaciones...
Page 31 - Panel frontal; Entrada de micr—fono de 5 terminales:; Conector de 3 terminales:; Conector de 4 terminales:; Consulte el diagrama de cableado en el ApŽndice 5.3.
2.2. Estación de intercomunicación de pared Station Four-W ™ Es una estaci—n de intercomunicaci—n que incluye un micr—fono port‡til (de 5 terminales) con un pulsador para hablar. Cada una de las preprogramaciones de las cuatro zonas de intercomunicaci—n se define y programa con el software PageMatri...
Page 32 - Operación de la estación Station Four-W; El color rojo indica que la zona est‡ en uso.; Acerca de las zonas preprogramadas
Operación de la estación Station Four-W ▲ El color del LED indica el estado de cada una de las zonas preprogramadas. ▲ El color verde indica que la zona est‡ disponible y que no est‡ siendo utilizada por otra estaci—n. ▲ El color rojo indica que la zona est‡ en uso. ▲ Cuando se oprime el bot—n para ...
Page 33 - Estación de intercomunicación de mesa Station Four; Entrada de micr—fono con alimentaci—n fantasma.; Se usa para conectar un micr—fono remoto con pulsador para hablar.; Operación de la estación de cuatro botones
2.3. Estación de intercomunicación de mesa Station Four ™ Es una estaci—n de cuatro botones, que incluye un micr—fono de condensador de electreto. Cadauna de las preprogramaciones de las cuatro zonas de intercomunicaci—n se define y programa conel software PageMatrix. Panel frontal Pulsador para hab...
Page 34 - Estación de intercomunicación de mesa Station Ten; Pulsador para hablar:
▲ Las zonas preprogramadas se pueden rotular en las casillas color blanco correspondientes. ▲ Si todos los LED indicadores destellan con luz roja al encender el sistema, significa que la estaci—n no ha sido programada. ▲ Si todos los LED indicadores destellan con luz verde al encender el sistema, si...
Page 35 - Volumen de micr—fono:; Ajuste embutido de ganancia del micr—fono.; Entrada de micr—fono auxiliar de 5 terminales:; El micr—fono auxiliar se encamina; Para conexi—n al controlador PageMatrix.; Operación de la estación Station Ten
Volumen de micr—fono: Ajuste embutido de ganancia del micr—fono. Panel posterior Entrada de micr—fono auxiliar de 5 terminales: Se usa para conectar un micr—fono remoto con pulsador para hablar. Consulte el diagrama de cableado del ApŽndice 5.4 . El micr—fono auxiliar se encamina autom‡ticamente a l...
Page 36 - Acerca de la prioridad
referimos a las asignaciones a los botones como Òzonas preprogramadasÓ, porque esas programaciones se establecen inicialmente y luego se cargan en el controlador PageMatrix donde se activan. Acerca de la prioridad Con el sistema PageMatrix, no hay par‡metros de prioridad inherentes a cada estaci—n f...
Page 37 - Descripción del software PageMatrix; En los sistemas MediaMatrix Mainframe que; El software del sistema PageMatrix incluye lo siguiente:; Paso uno: Instalaci—n del software PageMatrix; (los archivos entre parŽntesis indican las; Paso dos: Instalaci—n de los archivos de visualizaci—n MediaMatrix:
3. Descripción del software PageMatrix 3.1. Requisitos informáticos M’nimos: PC con procesador 486DX-100 o m‡s r‡pido, con Windows 3.1/95/NT4 o posterior, con 8 a16 MB de RAM y un puerto de comunicaciones disponible. 3.2. Instalación del software Nota: En los sistemas MediaMatrix Mainframe que se de...
Page 39 - Reseña de la barra de menús de la aplicación PageMatrix; Cierra la configuraci—n activa.; Download Configuration (cargar configuraci—n); Cierra la aplicaci—n PageMatrix.
Para incluir sus estaciones de hardware en la programaci—n, en el menœ Edit (edici—n,) utilice ÒInsertStationÓ (insertar estaci—n) o ÒAdd StationÓ (agregar estaci—n), segœn sea necesario. DespuŽs deconfigurar inicialmente la aplicaci—n PageMatrix, el diagrama de la izquierda muestra una columnacon t...
Page 41 - Max Number of Zones (cantidad m‡xima de zonas); Crea una ventana nueva.; Configuration Display (pantalla de configuraciones); Lista todas las configuraciones abiertas.; About PageMatrix; Muestra la pantalla inicial del sistema PageMatrix.
3.3.3. Menœ de herramientas/opciones View Toolbar (ver barra de herramientas) Muestra u oculta la barra de herramientas en la pantalla. View Status Bar (ver barra de estado) Muestra u oculta la barra de estado en la parte inferior de la pantalla. View Station Addresses (ver las direcciones de las es...
Page 42 - Operación típica del sistema PageMatrix; Componentes; PageMatrix mediante el cableado categor’a cinco apropiado; Conexiones; Este dispositivo ejecuta tres acciones:
4.0. Operación típica del sistema PageMatrix 4.1. Reseña 4.1.1. Componentes Los sistemas de intercomunicaci—n PageMatrix/MediaMatrix consisten en cinco componentesprimarios: ▲ Una estaci—n de intercomunicaci—n PageMatrix como m’nimo, conectada al controlador PageMatrix mediante el cableado categor’a...
Page 43 - configuradas en el sistema MediaMatrix.; Operaci—n interna del sistema MediaMatrix
3: Interpretar los datos de control patentados de las estaciones de intercomunicaci—n y convertirlos en cadenas serie est‡ndar, que se pueden dirigir al sistema MediaMatrix. El controlador PageMatrix no actœa sobre las se–ales de las estaciones de intercomunicaci—n, s—lo pasan a travŽs de la caja co...
Page 44 - Operaci—n b‡sica - Aqu’ vamosÉ; ver los dispositivos disponibles.; Localizaci—n de fallas 101; Recuerde, el archivo de visualizaci—n se debe compilar.
Operaci—n b‡sica - Aqu’ vamosÉ 1. Localice el archivo Ò.txtÓ correspondiente al dispositivo que desea utilizar.2. Cambie el nombre del archivo por Òpasha.iniÓ e inst‡lelo en el directorio Peavey (mediamatrix\views). Nota: Si desea mantener el archivo Òpasha.iniÓ original, s—lo debe cambiarle el nomb...
Page 46 - o si ya se est‡ ejecutando, cambiar a esa
5.2. Utilización del MediaMatrix Program Launcher (iniciador de programas del sistema MediaMatrix) El Program Launcher (iniciador de programas), se encuentra en el menœ Device/Miscellaneous (dispositivos/varios). Se lo utiliza para simplificar la apertura de otra aplicaci—n Windows, mientrasse est‡ ...
Page 49 - Configuración del controlador del sistema PageMatrix; frontal izquierda de la misma.
49 Stations 1 - 16 Stations 33 - 48 Stations 49 - 64 DIP SETTINGS CONTROLLER IDs Stations 17 - 32 NOTE: Factory settings default to 1 -16 1 2 3 4 5 6 7 8 ON 1 2 3 4 5 6 7 8 ON 1 2 3 4 5 6 7 8 ON 1 2 3 4 5 6 7 8 ON 5.5. Configuración del controlador del sistema PageMatrix Como se mencion— previamente...
Page 50 - Controlador PageMatrix
Nivel de entrada m‡ximo:Station 4 Wallmount (de 4 botones, de pared): Ð22 dBuStation 4 Desktop (de 4 botones, de mesa): Ð22 dBuStation 10 Desktop (de 10 botones, de mesa): Ð22 dBu Nivel de salida m‡ximo:Station 4 Wallmount (de 4 botones, de pared): +25 dBuStation 4 Desktop (de 4 botones, de mesa): +...
Page 51 - INSTRUCCIONES DE SEGURIDAD IMPORTANTES
INSTRUCCIONES DE SEGURIDAD IMPORTANTES ADVERTENCIA: Al utilizar productos elŽctricos se deben respetar las precauciones b‡sicas, que incluyen las siguientes: 1. Lea estas instrucciones. 2. Conserve estas instrucciones. 3. Preste atenci—n a todas las advertencias. 4. Respete todas las instrucciones. ...
Page 53 - Quatre syst•mes MediaMatrix peuvent •tre raccordŽs au contrTMleur.; Description des composants matériels; Contrôleur PageMatrix; et Station Ten; la section en langue anglaise de ce manual pg. 6.; Panneau avant; indique que lÕappareil est sous tension.
▲ Quatre syst•mes MediaMatrix peuvent •tre raccordŽs au contr™leur. ▲ Le panneau avant du contr™leur est dotŽ de 16 DEL indiquant lÕŽtat des postes. 2. Description des composants matériels 2.1 Contrôleur PageMatrix Le contr™leur PageMatrix constitue le coeur du syst•me. Il est reliŽ par un port sŽri...
Page 54 - Panneau arri•re; accepte les donnŽes du logiciel PageMatrix transmises par; . Remarque: ceci nÕest pas une connexion de; permet dÕallumer ou dÕŽteindre lÕappareil.; Connecteur de cordon dÕalimentation amovible
Panneau arri•re 6. Port de programmation (RS-232): accepte les donnŽes du logiciel PageMatrix transmises par le port sŽrie de lÕordinateur h™te (Com 1 ou Com 2). 7. Ports de donnŽes de contr™le (4 jacks RS-232): permettent de brancher et de contr™ler jusquÕˆ quatre syst•mes MediaMatrix. 8. EntrŽes d...
Page 55 - Le Station Four; EntrŽe microphone ˆ cinq broches:; Permet le branchement du microphone ˆ main ˆ 5 broches fourni.; Connecteur ˆ 3 broches:; Voir le schŽma de; Connecteur ˆ 4 broches:; Voir le schŽma de c‰blage ˆ lÕannexe 5.3.
2.2. Poste de téléappel à montage mural Station Four-W ™ Le Station Four ª -W est un poste ˆ montage mural ˆ quatre touches comprenant un microphone ˆ main dotŽ dÕun alternat. Chacune des quatre prŽsŽlections de zone est dŽfinie et programmŽe par lelogiciel PageMatrix. Panneau avant Touches de prŽsŽ...
Page 56 - Fonctionnement du poste Station Four-W; La couleur rouge indique que la zone est occupŽe.; Au sujet des présélections de zone
Fonctionnement du poste Station Four-W ▲ La couleur des DEL indique lÕŽtat de chacune des zones prŽsŽlectionnŽes. ▲ La couleur verte indique que la zone nÕest pas utilisŽe par un autre poste et quÕelle est donc libre. ▲ La couleur rouge indique que la zone est occupŽe. ▲ Lorsque le bouton dÕalternat...
Page 57 - Poste de téléappel de bureau Station Four; EntrŽe microphone XLR:; EntrŽe de microphone ˆ alimentation duplex; Volume du microphone:; RŽglage de gain en retrait; EntrŽe microphone auxiliaire ˆ 5 broches; Voir le schŽma de c‰blage; Fonctionnement du poste Station Four
2.3. Poste de téléappel de bureau Station Four ™ Le Station Four ª est un poste de tŽlŽappel de bureau ˆ quatre touches comprenant un microphone ˆ condensateur Žlectret. Chacune des quatre prŽsŽlections de zone est dŽfinie et programmŽe parle logiciel PageMatrix. Panneau avant Alternat: Appuyez sur ...
Page 58 - Poste de téléappel de bureau Station Ten; Le Station Ten; EntrŽe de microphone XLR:; EntrŽe de microphone ˆ alimentation duplex.
▲ Si toutes les DEL clignotent en vert lors de la mise sous tension, cela signifie que le poste a ŽtŽ programmŽ. ▲ LÕentrŽe de microphone auxiliaire (panneau arri•re) est toujours acheminŽe ˆ la prŽsŽlection de zone 1. 2.4. Poste de téléappel de bureau Station Ten ™ Le Station Ten ª est un poste de ...
Page 59 - EntrŽe microphone auxiliaire ˆ 5 broches:; Le microphone auxiliaire est automatiquement acheminŽ ˆ la; Pour le branchement du contrTMleur PageMatrix.; Fonctionnement du poste Station Ten
Panneau arri•re EntrŽe microphone auxiliaire ˆ 5 broches: DestinŽe au branchement dÕun microphone ˆ distance dotŽ dÕun alternat. Voir le schŽma de c‰blage ˆ lÕannexe 5.4. Le microphone auxiliaire est automatiquement acheminŽ ˆ la prŽsŽlection de zone 1 . Connecteur RJ45: Pour le branchement du contr...
Page 61 - Description du logiciel PageMatrix; sur les syst•mes MediaMatrix; Le syst•me logiciel PageMatrix complet inclut:; Premi•re Žtape : Installation du logiciel PageMatrix; (les fichiers par dŽfaut sont entre parenth•ses); Troisi•me Žtape : Installation des utilitaires MediaMatrix
3. Description du logiciel PageMatrix 3.1. Matériel requis Minimum: PC 486DX-100 ou plus rapide avec Windows version 3.1 / 95 / NT4 ou plus rŽcente, RAM de 8 ˆ 16 Mo et un port de communicationslibre. 3.2. Installation du logiciel Remarque: sur les syst•mes MediaMatrix Mainframe ˆ partir du mod•le 1...
Page 63 - Présentation de la barre de menu de l’application PageMatrix; Ferme la configuration active.
Noms des prŽsŽlections de zone avec le poste Station Ten Le poste Station Ten est dotŽ dÕun affichage 20 x 2 permettant de voir les prŽsŽlections de zone.Celles-ci sont nommŽes dans lÕapplication PageMatrix. LorsquÕun poste ˆ 10 touches est insŽrŽ(option Edit/Insert Station) lÕoption de texte appara...
Page 66 - Composants; cinq adŽquat; Connexions; Cet appareil remplit trois fonctions:
4.0. Fonctionnement de PageMatrix 4.1. Généralités 4.1.1. Composants Les syst•mes PageMatrix / MediaMatrix sont constituŽs de cinq composants principaux : ▲ Au moins un poste de tŽlŽappel PageMatrix reliŽ au contr™leur par un c‰ble de catŽgorie cinq adŽquat ▲ Un contr™leur PageMatrix dans lequel le ...
Page 67 - entrŽes des bo”tes de distribution du contrTMleur MediaMatrix.; Syst•me MediaMatrix et PASHA
2: Il achemine les signaux analogiques de microphone des postes de tŽlŽappel aux entrŽes des bo”tes de distribution du contr™leur MediaMatrix. 3: Il analyse les donnŽes de contr™le de chaque poste de tŽlŽappel et les convertit en cha”nes de donnŽes standard pouvant •tre transmises au contr™leur Medi...
Page 68 - NÕoubliez pas que le fichier de visualisation doit •tre compilŽ.
Utilisation de base Ð Tout dÕabord... 1. Trouvez le fichier .txt pour le syst•me que vous dŽsirez utiliser.2. Donnez ce fichier le nom Pasha.ini et placez-le dans le rŽpertoire Peavey (mediamatrix\views). Remarque : Pour conserver le fichier pasha.ini existant, il suffit de le renommer. 3. Ouvrez Me...
Page 69 - ARCHITECTURAL ACOUSTICS
5. Annexe 5.1. Assistance d’usine Peavey offre des services dÕassistance client•le et de rŽparations directement ˆ lÕusine. NÕhŽsitezpas ˆ nous appeler si vous dŽsirez notre aide ou des informations complŽmentaires. Vous pouveznous joindre de 8 ˆ 17 heures HNC au (800) 543-2991 ou (601) 483-5376. Ad...
Page 70 - Utilisation du lanceur de programme MediaMatrix
5.2 Utilisation du lanceur de programme MediaMatrix Le lanceur de programme se trouve dans le menu Device/Miscellaneous (syst•me/divers). Il permetdÕouvrir facilement une autre application Windows pendant lÕutilisation de MediaMatrix. Le bloc delanceur de programme peut •tre ŽtiquetŽ et inclus dans ...
Page 73 - Configuration du contrTMleur PageMatrix; cTMtŽ avant gauche du contrTMleur.
5.5. Configuration du contr™leur PageMatrix Comme il lÕa ŽtŽ mentionnŽ plus haut, le contr™leur PageMatrix peut commander jusquÕˆ 16 postessimultanŽment. Dans les applications plus Žtendues o• il est nŽcessaire dÕutiliser plusieurs contr™leurs, les codes dÕidentification des diffŽrentes unitŽs PageM...
Page 74 - ContrTMleur PageMatrix
Alimentation : ƒtats-Unis: 120 V c.a.~, 60 Hz, 50 WExportation: 100 V c.a~, 50/60 Hz, 50 W 230 V c.a.~, 50/60 Hz, 50 W Accessoires inclus: Cordon dÕalimentation CEI(4) connecteurs Phoenix 12 positions(1) connecteur Phoenix 3 positions Dimensions et poids: 3,5 po H x 19 po L x 11,69 po P (8,9 x 48,3 ...
Page 75 - NOTE IMPORTANTE CONCERNANT LA SECURITE
NOTE IMPORTANTE CONCERNANT LA SECURITE ATTENTION: Lors de lÕutilisation de appareils Žlectriques, certaines mesures de sŽcuritŽ doivent •tre respectŽes: 1. Lisez toutes les instructions. 2. Conservez ces instructions. 3. Tenez compte de tous les avertissements. 4. Suivez prŽcisemment les instruction...
Page 77 - Beschreibung der Hardware; Frontplatte; AnschlŸsse aktiv sind.
2. Beschreibung der Hardware 2.1 Der PageMatrix-Controller Der PageMatrix-Controller ist das HerzstŸck des Systems. Er wird Ÿber einen seriellen RS-232-Anschlu§ am MediaMatrix-Computer angeschlossen, in dem MediaMatrix und das PageMatrix-Programm laufen. Ein PageMatrix-Controller kann bis zu vier se...
Page 78 - RŸckwand; Dient zum Empfang der PageMatrix-Programmdaten vom; Abnehmbarer Stromkabelstecker
RŸckwand 6. Programmanschlu§ (RS-232): Dient zum Empfang der PageMatrix-Programmdaten vom seriellen Anschlu§ des Host-Computers (COM 1 oder COM 2). 7. Steuerungsdaten-AnschlŸsse (4 RS-232-Buchsen): Dienen zum Anschlu§ bzw. zur Steuerung von bis zu vier MediaMatrix-Systemen. 8. StationseingŠnge (16 R...
Page 79 - Die Station Four; Zonentasten mit Leuchtdioden:
2.2. Rufstation Station Four-W™ zur Wandmontage Die Station Four ª -W ist eine fŸr die Wandmontage vorgesehene Station mit vier Tasten und einem Handmikrofon mit Drucktastenaktivierung. Die vier Zonenvoreinstellungen werden Ÿber diePageMatrix-Software definiert und programmiert. Frontplatte 4 Zonent...
Page 81 - Eingang fŸr phantomgespeistes Mikrofon; Betrieb der Station Four
2.3. Tisch-Rufstation Station Four ™ Die Station Four ª ist eine Tischstation mit vier Tasten und einem Elektret-Kondensatormikrofon. Die Zonenvoreinstellungen der vier Tasten werden Ÿber die PageMatrix-Software definiert und programmiert. Frontplatte Tastenaktivierung: Zur Aktivierung des Mikrofons...
Page 82 - Die Station Ten; 0 Zonenvoreinstellungstasten mit Leuchtdioden:; FŸnfpoliger Zusatzmikrofoneingang (Aux Mic); FŸr den Anschlu§ am PageMatrix-Controller.
2.4. Tisch-Rufstation Station Ten™ Die Station Ten ª ist eine Tischstation mit zehn Tasten und einem Elektret-Kondensatormikrofon. Die zehn Zonenvoreinstellungen werden Ÿber die PageMatrix-Software definiert und programmiert.Au§erdem ist sie mit einer telefonŠhnlichen Tastatur mit 12 Tasten sowie ei...
Page 83 - Betrieb der Station Ten; Beim Einschalten adressiert das GerŠt automatisch Zone 1.; Zonenvoreinstellungen
Betrieb der Station Ten ▲ Die Leuchtdiodenfarbe gibt den Status der jeweiligen Voreinstellzone wieder: ▲ GrŸn bedeutet, da§ die Zone frei ist, d.h. nicht von einer anderen Station gerufen wird. ▲ Rot bedeutet, da§ die Zone belegt ist. ▲ DrŸckt man auf die Sprechtaste, wird die gewŠhlte Zonentaste or...
Page 86 - Programmieren der Rufstationen mit dem PageMatrix-Programm
aufgefordert, in dem die entpackten Dateien abgelegt werden kšnnen. Diese Dateien M†SSEN im Verzeichnis ãDevicesÒ des MediaMatrix-Stammverzeichnisses gespeichert werden (c:\peavey\devices\standard\paging). Wenn das Stammverzeichnis nicht den vorgegebenen Namen hat, geben Sie bitte den entsprechenden...
Page 87 - Benennen der Voreinstellzonen bei Verwendung der Station Ten; Die Menüleiste des Programms „PageMatrix“; Schlie§t die aktive Konfiguration.; Download ConfigurationÉ (Konfiguration fernladen)
links auf dem Bildschirm eine Spalte zu sehen, in der alle angeschlossenen Rufstationen aufgelistetsind. Rechts oben befindet sich eine Matrix-Liste der Zonen, darunter die Spalten mit den durchnumerierten Tasten. WŠhlen Sie die Station aus, die Sie zuerst programmieren mšchten,und aktivieren Sie da...
Page 89 - Configuration Display (Konfigurationsanzeige); Listet alle gešffneten Konfigurationen auf.
3.3.3. MenŸ ãTools/OptionsÒ View Toolbar (Symbolleiste einblenden/ausblenden) Bestimmt, ob die Symbolleiste angezeigt wird oder nicht. View Status Bar (Statusleiste einblenden/ausblenden) Bestimmt, ob die Statusleiste amunteren Rand des Fensters angezeigt wird oder nicht. View Station Addresses (Sta...
Page 90 - Die Komponenten; Der PageMatrix-Software; AnschlŸsse; Diese Einheit hat drei Aufgaben:
4.0. Das Funktionsschema von PageMatrix 4.1. Überblick 4.1.1. Die Komponenten PageMatrix/MediaMatrix-Rufsysteme bestehen aus fŸnf Hauptkomponenten: ▲ Mindestens einer PageMatrix-Rufstation, die mit den richtigen CAT-5-Kabeln am PageMatrix-Cotroller angeschlossen ist. ▲ Dem PageMatrix-Controller, in ...
Page 91 - konfigurierten Zonen im MediaMatrix adressiert.; Der Betrieb von MediaMatrix
3: Die Interpretation der proprietŠren, von den Rufstationen gesendeten Steuerungsdaten und deren Umwandlung in serielle Standardstrings, die an MediaMatrix weitergeleitet werden kšnnen. Der PageMatrix-Controller verarbeitet die Mikrofonsignale von den Rufstationen in keinerWeise, sondern leitet sie...
Page 92 - Inbetriebnahme Ð So wirdÕs gemachtÉ; Nicht vergessen Ð die Ansichtsdatei mu§ kompiliert werden.
Inbetriebnahme Ð So wirdÕs gemachtÉ 1. Suchen Sie die *.txt-Datei zu der Einheit, die Sie benutzen mšchten.2. Benennen Sie diese Datei in ãpasha.iniÒ um, und speichern Sie sie im Peavey- Verzeichnis ãmediamatrix\viewsÒ. Hinweis: Wenn Sie die ursprŸngliche ãpasha.iniÒ-Datei behalten mšchten, gebenSie...
Page 93 - €nderungen an Ausstattung und technischen Daten vorbehalten.
5. Anhang 5.1. Werkseitiger Service Peavey bietet direkten Werkskundendienst an. Sollten Sie weitere Hilfe oder zusŠtzlicheInformationen benštigen, rufen Sie uns bitte an. Sie erreichen uns von 8.00 bis 17.00 CST (= siebenStunden frŸher als MEZ) unter 001 601 483 5376. Die Anschrift fŸr alle Korresp...
Page 98 - PageMatrix-Controller; Rufstationen
5.6. Technische Daten PageMatrix-Controller Anschlu§werte USA: 120 V~, 60 Hz, 50 WExport: 100 V~, 50/60 Hz, 50 W 230 V~, 50/60 Hz, 50 W Zubehšr im Lieferumfang: IEC-Netzkabel4 Phoenix-Stecker mit 12 Positionen1 Phoenix-Stecker mit 3 Positionen Abmessungen und Gewicht 89 mm x 483 mm x 297 mm (H x B x...
Page 99 - WICHTIGE SICHERHEITSRICHTLINIEN
99 WICHTIGE SICHERHEITSRICHTLINIEN WARNUNG: Beim Einsatz elektrischer GerŠte sollten stets nachfolgend genannte grundlegende Sicherheitsrichtlinien beachtet werden: 1. Lesen Sie diese Richtlinien. 2. Bewahren Sie diese Richtlinien stehts griffbereit auf. 3. Beachten Sie sŠmtliche Richtlinien. 4. Bef...
Page 102 - IMPORTANT SAFETY INSTRUCTIONS
102 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed, including the following: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. For example, ...
Page 103 - PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY
PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY Effective Date: July 1, 1998 What This Warranty Covers Your Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada. What This Warranty Does Not Cover The Warranty does not cover: (1...
Page 104 - Peavey Electronics Corporations
Peavey Electronics Corporations ¥ 711 A Street ¥ Meridian, MS 39301 ¥ U.S.A. (601) 483-5367 ¥ Fax (601) 486-1678 ¥ www.peavey.com ©1999 Printed in U.S.A. 1/99 Features and specifications subject to change without notice. 80304504