Peavey IDC 150T II - Manual
Peavey IDC 150T II – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Congratulations on your purchase of the IDCTM 150T; power amplifier is a three rack; FRONT PANEL FEATURES:; Depress to “on” position to turn on amplifier.
- Page 5 – LIMITED WARRANTY
- Page 6 – Due to our efforts for constant improvements,; SPECIFICATIONS; 4 V DC battery powered, continuous sine wave:; Total Harmonic Distortion:; Unbalanced: 10 k ohms
- Page 8 – Features and specifications subject to change without notice.; A Division of Peavey Electronics Corporation; ©1995 #80302291 Printed in U.S.A. 12/95
1
Cover for IDC™ 150T
II
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 IDC™ 150T II TM ® Congratulations on your purchase of the IDC™ 150T II . The IDC™ 150T II power amplifier is a three rack space, solid state, mono power amplifier capable of delivering more than 150 W RMS. The unit has been designed tobe reliable, meeting the needs of most fixed installation appli...
5 INSTALLATION INFORMATION: POWER HANDLING AND GROUNDING For your safety, we have incorporated a 3-wire line (mains) cable with proper grounding facilities. It is not advisable toremove the ground pin under any circumstances. If it is necessary to use the equipment without proper groundingfacilities...
6 Due to our efforts for constant improvements, features and specifications listed herein are subject to change without notice. SPECIFICATIONS (all measurements @ 120 V AC, 60 Hz or 24 V DC) Rated Output Power: (typical value)AC powered, continuous sine wave: 70 volt line 32.7 ohms, 1 kHz, 1% THD: 1...
