Peavey DTH 4210f - Manual
Peavey DTH 4210f – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DESCRIPTION; Two Neutrik; DIRECTIVITY
- Page 3 – Figure 1; Impedance; Figure 2; DTH; Beamwidth; Figure 3; Q & Directivity Index; Figure 4
- Page 4 – dB per division
- Page 8 – REF
- Page 9 – Wiring Diagram; Peavey 8-Conductor Cable; Pin-Out Cross Reference
- Page 10 – ESPAÑOL; ESPECIFICACIONES; Capacidad de potencia:; Complemento del transductor:; CARACTERÍSTICAS
- Page 11 – DIRECTIVIDAD
- Page 12 – FRANÇAIS; CARACTERISTIQUES; Puissance admissible:; FONCTIONNALITES
- Page 14 – DEUTSCH; SPEZIFIKATIONEN; FEATURES
- Page 16 – WARNING; RIGGING IS THE RESPONSIBILITY OF OTHERS.
S
P
E
C
I
F
I
C
A
T
I
O
N
S
SPECIFICATIONS
Frequency Response, 1 Meter
On-Axis, Swept-Sine in Anechoic
Environment:
115 Hz to 16 kHz
Low-Frequency Cut-Off (-3 dB point):
115 Hz
Usable Low-Frequency Limit
(-10 dB point):
90 Hz
Power Handling:
Full Range:
400 W continuous (40 V RMS)
800 W program
1,600 W peak
Bi-amp Low:
450 W continuous (40V RMS)
800 W program
1,600 W peak
Bi-amp High:
80 W continuous (25.3 V RMS)
160 W program
320 W peak
Sound Pressure Level, 2.8 V (1 watt) •
1 Meter in Anechoic Environment:
101 dB (Full Range)
103 dB (Bi-amp)
Maximum Sound Pressure Level:
127 dB (Full Range)
Radiation Angle Measured at -6 dB
Point of Polar Response:
500 Hz to 1.6 kHz:
Horizontal: 72
°
±
19
°
Vertical: 63
°
±
20
°
1.6 kHz to 5 kHz:
Horizontal: 75
°
±
8
°
Vertical: 54
°
±
20
°
5 kHz to 16 kHz:
Horizontal: 54
°
±
17
°
Vertical: 37
°
±
6
°
Directivity Factor, Q (Mean):
18.5
±
13.6
Directivity Index, Di (Mean):
11.9 dB
±
2.4 dB
Transducer Complement:
Two SP 10825 Scorpion
®
Plus drivers
One 44XT
™
compression driver coupled to
a CH
®
-7 constant directivity horn
Crossover Frequency:
2 kHz
Time Offset:
0.67 mS (delay lows)
Impedance (Z):
4 ohms nominal
3.2 ohms minimum
Input Connections:
Two Neutrik
®
four-conductor Speakon
®
connectors (NL4MD-V-1)
Enclosure Materials and Finish:
3/4" plywood with polyurethane coating
and powder coated metal grille with
black polyester foam overlay
Dimensions (H x W x D):
46.375" x 18.75" front (9" rear) x 29.25"
( 117.8 cm x 48.26 cm front (22.9 cm rear)
x 74.3 cm)
Net Weight:
158 lbs. (71.67 kg)
FEATURES
• “Lockable” mode select switch
• 44XT
™
compression driver
• Anti-axial, mid-bass driver
arrangement
• Dual SP10825 Scorpion
®
Plus drivers
• High power-handling, polypropylene
capacitors
DTH
®
4210f
Minimum-Profile
Loudspeaker
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
• 16-Gauge, powder coated metal grille• Externally switchable, full-range/ bi-amp operation• 80 ° x 40 ° constant-directivity horn DESCRIPTION The DTH ® 4210f was designed as a true minimum-profile enclosure. Itmeasures only 18-3/4" at its widestpoint up front, tapering to a mere 9" atthe ba...
20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) 60 70 80 90 100 110 dB SPL (re 20 Pa) Amplitude Response (1W 1m On-Axis) Figure 1 20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) 1 2 3 5 10 20 30 50 100 Impedance Z ( ) Figure 2 DTH ® 4210f 20 50 100 200 500 1k 2k 5k 10k 20k Frequency (Hz) 30 40 6...
DTH ® 4210f HORIZONTAL POLAR PATTERNS dB per division 500 Hz 400 Hz 630 Hz 2 kHz 1.6 kHz 2.5 kHz 1 kHz 800 Hz 1.25 kHz -90 o -60 o -30 o 0 o 30 o 60 o 90 o 200 Hz 250 Hz 315 Hz -90 o -60 o -30 o 0 o 30 o 60 o 90 o -90 o -60 o -30 o 0 o 30 o 60 o 90 o -90 o -60 o -30 o 0 o 30 o 60 o 90 o -90 o -60 o ...
