Peavey CPX 1500 - Manual
Peavey CPX 1500 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
S E R I E S
Features
Description
• GCL Gain Comparator Limiting system with rear panel defeat switch
• Built-in Crossover
150 Hz, -24 dB per octave Linkwitz-Riley filter, tuned for subs
Individual in/out switches for Channels A and B
1/4” daisy chain outputs
• Built-in low cut filter
-18 dB per octave at 80 Hz
Individual in/out switches for Channels A and B
• Input connectors - Barrier strip, Female XLR 1/4” TRS
Pin 2 hot
• Outputs connectors
Speakons
TM
for Ch A and B and Bridged mono
Binding posts for Bridge mode
• Mode selector switch for stereo and bridged-mono operation
• Two speed DC Fan
Protection Circuitry
GCL
(Gain Comparator Limiting): Monitors input/output gain and
reduces signal when distortion or excessive high current conditions
occur. Protects loudspeakers from dangerous transients and unex-
pected level changes. Transparent in operation, yet very effective for
its designed purpose.
Thermal
: Amp monitors internal heat sink temperature and tem-
porarily shuts down during extreme thermal conditions.
DC Triac Crowbar
: Prevents amplifier from putting out or receiving
dangerous DC over the speaker lines.
Turn On/Off Muting
: Outputs are muted during turn on and turn off
to prevent audible pop through speakers.
The CPX is an affordable line of amplifiers geared toward the
MI and DJ markets. A tradition of great sound quality, flexibili-
ty and reliability is carried over into the Crest Performance
series. Industry standard connectors and features make the
CPX a great backbone for mobile sound systems, project stu-
dios and many other applications. Musicians will also find
CPX as the power amp of choice.
Power points
: Crest CPX amps are available in three models,
CPX900, CPX1500 and CPX2600. Power capabilities range
from 180 Watts to 2200 Watts. CPX amps will drive loads that
range from 8 Ohms stereo to 2 Ohms stereo, or 4 Ohms
bridged.
Feature set
: With a comprehensive set of features including
built-in signal limiting, low pass filters and low frequency
crossovers with direct outputs, the CPX line addresses sever-
al applications and serves as a low-cost solution for most
power amplification needs.
Power Specifications
8
Ω
stereo
4
Ω
stereo
2
Ω
stereo
8
Ω
bridged
4
Ω
bridged
1kHz, 0.1% THD+N (2
Ω
stereo and 4
Ω
bridged have 1% THD)
CPX 2600
500w
750w
1100w
1550w
2200w
CPX 1500
300w
500w
750w
1000w
1500w
CPX 900
180w
300w
450w
600w
900w
CPX900 - CPX2600
Power Amplifiers
(CPX2600 model shown)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
