Peavey 1G - Manual
Peavey 1G – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
SPECS
P E A V E Y E L E C T R O N I C S
SP
™
1G
Sound Reinforcement
Enclosure with
Sound Guard
™
44XT
™
SPECIFICATION
S
Frequency Response, 1 Meter
On-Axis, Swept-Sine in Anechoic
Environment:
63 Hz to 19 kHz
Low Frequency Cut-Off (-3 dB point):
63 Hz
Usable Low Frequency Limit
(-10 dB point):
50 Hz
Power Handling:
Full-Range:
450 W continuous (60V RMS)
900 W program
1,800 W peak
Bi-amp Low:
350 W continuous (52.9 V RMS)
700 W program
1,400 W peak
Bi-amp High:
80 W continuous (25.3 V RMS)
160 W program
320 W peak
Sound Pressure Level, 1 Watt, 1
Meter in Anechoic Environment:
Full-Range:
99 dB (2.8 V)
Bi-amp Low:
101 dB (2.8 V)
Bi-amp High:
110 dB (2.8 V)
Maximum Sound Pressure Level
(1 meter):
Full-Range:
121 dB continuous
133 dB peak
Bi-amp Low:
121 dB continuous
135 dB peak
Bi-amp High:
124 dB continuous
140 dB peak
Radiation Angle Measured at -6 dB
Point of Polar Response:
500 Hz to 1.6 kHz:
Horizontal: 96
°
±
13
°
Vertical: 91
°
±
21
°
1.6 kHz to 5 kHz:
Horizontal: 81
°
±
6
°
Vertical: 61
°
±
18
°
5 kHz to 16 kHz:
Horizontal: 56
°
±
18
°
Vertical: 39
°
±
7
°
Directivity Factor, Q (Mean):
15.7
±
12.5
Directivity Index, Di (Mean):
11.0 dB
±
2.7 dB
Transducer Complement:
One 1505-8 KADT 15" Black Widow
®
woofer
One 44XT
™
compression driver loaded
with a CH
®
7 constant directivity horn
Box Tuning Frequency:
56 Hz
Crossover Frequency (internal
passive):
1,100 Hz
Minimum Recommended Active
Crossover Frequency and Slope for
Bi-amping:
1,200 Hz at 18 dB/octave
Time Offset:
0.70 ms (delay Lows)
Impedance (Z):
Full-Range Nominal:
8
Ω
Full-Range Minimum:
5.7
Ω
Lows Nominal:
8
Ω
Highs Nominal:
8
Ω
Input Connections:
Two paralleled 1/4" phone jacks for
full-range input
One 1/4" phone jack for bi-amp low-
frequency input
One 1/4" phone jack for bi-amp high-
frequency input
Enclosure Materials & Finish:
3/4" plywood enclosure covered with black
carpet and protective polymer corners
Expanded metal grille to protect the low-
frequency driver
Mounting Provisions:
One SA
®
-1 stand mount on bottom of
enclosure.
Dimensions (H x W x D):
33.75" x 19" x 20"
(85.7 cm x 48.3 cm x 50.8 cm)
13" rear width (33 cm)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
